• Atmosphere
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2011

Numerical prediction capability has been improved over the decades, but progress of prediction for high-impact weather (HIW) was unsatisfactory. One reason of low predictability for HIW is lack of observation data. The National Institute of Meteorological Research (NIMR) has been performed observation program for improvement of predictability, and reduction in social and economical cost for HIW. As part of this observation program, summer intensive observation program (ProbeX-2009) was performed at the observation-gap areas from 25 August to 6 September 2009. Sounding observations using radiosonde were conducted in the Gisang2000 research vessel (R/V) from the Korea Meteorological Administration (KMA) over the West Sea and the Eardo R/V from the Korea Ocean Research and Development Institute (KORDI) over the South Sea. Observation System Experiment (OSE) is carried out to examine the effect of ProbeX-2009 data. OSEs using Korea Local Analysis and Prediction System (KLAPS) and Weather Research and Forecasting (WRF) Model are conducted to investigate the predictability for a short time forecast. And, OSEs using WRF/3DVAR system and WRF forecast model are conducted to study the predictability for an extended time. Control experiment (K_CTL and CNTL) used only GTS observation and experiment (K_EXP and SWEXP) used ProbeX-2009 data from two system are performed. ETS for 3hr accumulated rainfall simulated by KLAPS-WRF shows that K_EXP is higher than K_CTL. Also, ETS for 12hr accumulated rainfall of SWEXP from 3DVAR-WRF is higher than CNTL. The results indicate that observation over the ocean has positive impact on HIW prediction.

• KDI Journal of Economic Policy
• /
• v.32 no.3
• /
• pp.1-32
• /
• 2010

The global financial crisis has exerted enormous impacts on the attainment of inflation target in Korea. The annual average CPI inflation was 3.3% during the targeting period of 2007-2009 and the target was $3.0{\pm}0.5%$. Thus Korea has succeeded in keeping annual average CPI inflation just below the upper limit of the 2007-2009 target under the global crisis. This paper intends to evaluate the performance of the inflation targeting system in Korea. First, it estimates the conventional call rate reaction equation under the global crisis and finds that the policy interest rates never reacted to expected inflation, output gap, and won/dollar exchange rate, as expected by theory. Second, it identifies the shock of global financial crisis into core and non-core, applying the structural VAR model. The core shock was defined to have no (medium- to) long-run impact on real output. The core shock was identified to have the character of the demand shock, since it has the positive impact on the inflation and output in the short run. The structural core inflation due to core shock was an attractor of headline inflation, not vice versa. Therefore, the structural core inflation that reflects the demand-side shock would be the better intermediate target for the final headline inflation target than the official core inflation that excludes the volatile inflation of agricultural and oil-related products. During the inflation targeting period of 2007-2009, the structural core inflation was more volatile than the official core inflation, because the global crisis has very large negative impacts on the domestic demand as well as the prices of agricultural and oil-related products. This paper shows that the negative core shock during the fourth quarter of 2008 was larger than that in the financial crisis in 1998. But the core shock turned into positive very quickly in 2009, as the Korean economy recovered very quickly from crisis. The volatile changes in structural core inflation suggests that the Bank of Korea barely managed to attain the 2007-2009 inflation target, owing to the very large negative impacts of the global financial crisis on the domestic demand. It also suggests that the rapid rise in core inflation with the rapid recovery of the Korean economy will lead to rapid rise in headline inflation.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.27-32
• /
• 2007

This study was to suggest the predictive model of propagation, considering the effect by the multipath waves produced by the sending and receiving vehicles' left/right reflectors and the adjacent vehicles when the communication between the vehicles on the one-way two-lanes road in the urban city with a lot of traffic jams. Then, the radius of curved road was 600[m], the length of curved roads $52.4\sim471.2[m]$, and the bridge's pier of road was $5o\sim45o$. Also, it was simulated by changing the receiving vehicle located on the curved road's gap from minimum 3.3[m] to maximum 29.5[m], corresponding to the change of distance of the bridge's pier of road and curved road. As a result of this research above, in case of $5o\sim15o$ bridge's pier of road, it was within l[dB] regardless of the receiving vehicle's position on the curved road in case of propagation path loss. In case of $15o\sim45o$, it was approximately $1\sim8[dB]$ as the bridge's pier of road is changed. And, in case of propagation path, it found out that it was changed to $0.4\sim120[m]$ according to the change of bridge's pier of road. Then, the delay time of propagation was 400[nsec] as it produced 120[m] in the difference of propagation path.

• Korean Journal of Social Welfare
• /
• v.52
• /
• pp.89-115
• /
• 2003

While many social work studies has focused on the development of practice intervention and demonstration of the efficacy, little attention has been given to the way how the results can be disseminated and utilized in practice area. But attempts to bridge the research-practice gap empathize importance of dissemination and utilization including knowledge utilization, innovation diffusion, information dissemination, program replication, and technology transfer etc. In this recognition, this study that focused on the process after development of program tried to search and analyze the real disseminating process and utilization state with applying Growing-up Skills Program(GUSP) developed and disseminated by this researcher. For the purpose, theories and models for program diffusion were reviewed, and dissemination & utilization of GUSP was analyzed on the 'Herie & Martin's model' with retrospective perspectives. Through this tracer study, these were confirmed or founded as problems of GUSP in disseminating process : lack of specific strategy for the dissemination ; unplanned coping due to little preparation ; and unclear and insufficient understanding of the target system in the beginning stage of dissemination. And followings are suggested for the improvement of social work program dissemination & utilization in the field: to conduct diffusion process on the basis of a proper model; to consider integrative relationship between D&D and dissemination & utilization ; to endeavor for collecting feed back from the field ; and to reinforce social work education and study related to innovation diffusion. These results showed importance of dissemination & utilization in social work and utility of GUSP despite of several limitations. More concerns of dissemination & utilization are needed for the integration of research and practice in Korean social work.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.1
• /
• pp.49-57
• /
• 2002

The possibility of a transmission noise reduction of piezoelectric smart panels using piezoelectric shunt damping is experimentally studied. Piezoelectric smart panel is basically a plate structure on which piezoelectric patch with shunt circuits is mounted and sound absorbing materials are bonded on the surface of the structure. Sound absorbing materials can absorb the sound transmitted at mid frequency region effectively while the use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. To be able to reduce the sound transmission at low panel resonances, piezoelectric damping using the measured electrical impedance model is adopted. Resonant shunt circuit for piezoelectric shunt damping is composed of register and inductor in series, and they are determined by maximizing the dissipated energy throughout the circuit. The transmitted noise reduction performance of smart panels is investigated using an acoustic tunnel. The tunnel is a tube with square crosses section and a loud-speaker is mounted at one side of the tube as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across panels is measured. Noise reduction performance of a smart panels possessing absorbing material and/or air gap shows a good result at mid frequency region but little effect in the resonance frequency. By enabling the piezoelectric shunt damping, noise reduction of 10dB, 8dB is achieved at the resonance frequencise as well. Piezoelectric smart panels incorporating passive method and piezoelectric shunt damping are a promising technology for noise reduction in a broadband frequency.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.307-330
• /
• 2016

This article aims to explain how Gangnam, as a model and standard of compressed urbanization in South Korea, was created. Gangnam and Gangnam-style urbanization need attention not only because they contrast with Korea's urbanization in the past as well as urbanization in the West but also they provide an important model in contemporary Korea's politics, economy and culture. However, there are little studies of how Gangnam's peculiar urbanism was created. To fill this gap, this article will first capture Gangnam's peculiar urbanism as a material landscape and sociocultural lifestyle. Gangnam-style urbanism is (a) materially characterized by high-rise apartment complexes owned by the middle and upper class for dwelling and asset growth and (b) socio-culturally characterized by political conservatism, public indifference, competition over academic performance, appearance, and fashion, and nightlife. Then it will show Gangnam's archetype was created in a spatially and temporally compressed way in and through the spatial selectivity of Korean anti-communist authoritarian developmental state strategies: (1) anti-communism led to the diffusion and accommodation of the population through apartments in Gangnam in the context of its confrontation with North Korea and the fast-growing population of Seoul; (2) military authoritarianism excluded the low-income class and the urban poor from urban development; and (3) the developmental state adopted selective housing policy which treated construction companies and the middle class preferentially through exceptional zoning and price distortions, promoting the construction of apartment in Gangnam and its resultant uneven development.

• School Mathematics
• /
• v.16 no.2
• /
• pp.387-407
• /
• 2014

Gender differences have been given major attention in mathematics education in the context of pursuing gender equity in instructional and learning environment. It had been traditional belief that male students would outperform female students in mathematics, especially in the areas as geometry. This belief has been given doubts by cumulated empirical evidences that gender differences are gradually diminishing or even reversing its direction as time goes on. In this study, gender differences in geometry were explored using TIMSS 8th grade mathematics data administered in TIMSS 2003, 2007, and 2011, based on a cognitive diagnostic modeling(CDM) approach. Among various CDM models, the Fusion model was employed. The Fusion model has advantages over other CDM models in that it provides more detailed information about gender differences at the attribute level as well as item level and more mathematically tractable. The findings of this study show that Attribute 3(Three-dimensional Geometric Shapes) revealed statistically significant gender differences favoring male students in TIMSS 2003 and 2007, but did not show significant differences in TIMSS 2011, which provides an additional empirical evidence supporting the recent observation that gender gap is narrowing. In addition to the general trends in gender differences in geometry, this study also provided affluent information such as gender differences in attribute mastery profiles and gender differences in relative contributions of each attribute in solving a particular item. Based on the findings of the CDM approach exploring gender differences, instructional implications in geometry education are discussed.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• Current Research on Agriculture and Life Sciences
• /
• v.22
• /
• pp.19-27
• /
• 2004

Cultivation area of garlics is 9% of all cultivation area of vegetables. The amount of annual demand is increased in 1,000~1,500ton. Also, the amount of demand per person has a tendency to increase as above 10kg. So, garlics has become important crops in agriculture. The purpose of this study is to acquire the basic information to design the garlic seeder attached power tiller. We used Working Model 3D program to design an automatic aligning device which is the most important part of the garlic seeder. The results are as follows; 1. The optimum depth of garlics seeding was shown as 3cm. 2. The garlic seed has to he discharged from the garlic seeder at intervals of 0.75sec in order to seed at intervals of seeds of 15cm. 3. The optimum design factors of the automatic aligning device were shown as cylinder diameter of 4cm, cylinder gap of 1cm, revolution of 36rpm and inclined angle of cylinder of $8.4^{\circ}$.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.55-63
• /
• 2020

Earthwork automation has emerged as a promising technology in the construction industry, and the application of earthwork automation technology is starting from the acquisition and processing of point cloud data of the site. Point cloud data has more than a million data due to vast extent of the construction site, and the processing time of the original point cloud data is critical because it takes tens or hundreds of hours to generate a Digital Terrain Model (DTM), and enhancement of the processing time can largely impact on the efficiency of the modeling. Currently, a benchmark program (BP) is actively used for the purpose of both point cloud data processing and BIM design as an integrated program in Korea, however, there are some aspects to be modified and refined. This study modified the BP, and developed an updated program by adopting a compile-based development environment, newly designed UI/UX, and OpenGL while maintaining existing PCD processing functions, and expended compatibility of the PCD file formats. We conducted a comparative test in terms of loading speed with different number of point cloud data, and the results showed that 92 to 99% performance increase was found in the developed program. This program can be used as a foundation for the development of a program that reduces the gap between design and construction by integrating PCD and earthwork BIM functions in the future.