• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.417-426
• /
• 2019

Gangue filling in the goaf is an effective measure to control the surface subsidence. However, due to the obvious deformation of gangue compression, the filling effect deserves to be further studied. To this end, the deformation of coal gangue filling in the goaf is analyzed by theoretical analysis, large-scale crushed rock compression test, and field investigation. Through the compression test of crushed rock, the deformation behaviour characteristics and energy dissipation characteristics is obtained and analysed. The influencing factors of gangue filling and predicted amount of main deformation are summarized. Besides, the predicted equation and filling subsidence coefficients of gangue are obtained. The gangue filling effect was monitored by the movement observation of surface rock. Gangue filling can support the roof of the goaf, effectively control the surface subsidence with little influence on the ground villages. The premeter and equations of the main deformation in the gangue filling are verified, and the subsidence coefficient is further reduced by adding cemented material or fine sand. This paper provides a practical and theoretical reference for further development of gangue filling.

• Geomechanics and Engineering
• /
• v.20 no.6
• /
• pp.485-495
• /
• 2020

Based on the movement characteristics of overlying strata with gangue backfilling, the compression test of gangue is designed. The deformation characterristics of gangue is obtained based on the different Talbot index. The deformation has a logarithmic growth trend, including sharp deformation stage, linear deformation stage, rheological stage, and the resistance to deformation changes in different stages. The more advantageous Talbot gradation index is obtained to control the surface subsidence. On the basis of similarity simulation test with gangue backfilling, the characteristics of roof failure and the evolution of the supporting force are analyzed. In the early stage of gangue backfilling, beam structure damage directly occurs at the roof, and the layer is separated from the overlying rock. As the working face advances, the crack arch of the basic roof is generated, and the separation layer is closed. Due to the supporting effect of filling gangue, the stress concentration in gangue backfilling stope is relatively mild. Based on the equivalent mining height model of gangue backfilling stope, the relationship between full ratio and mining height is obtained. It is necessary to ensure that the gradation of filling gangue meets the Talbot distribution of n=0.5, and the full ratio meets the protection grade requirements of surface buildings.

• Economic and Environmental Geology
• /
• v.7 no.2
• /
• pp.63-78
• /
• 1974

Daehwa tungsten-molybdenum deposits is fissure filled quartz veins occurring in Precambrian granite gneiss adjacent to the contact with Mesozoic biotite granite mass. Essential ore minerals are molybdenum and wolframite accompaning scheelite, cassiterite, chalcopyrite, pyrrhotite, pyrite and bismuthinites. Gangue minerals are quartz and little muscovte, fluorite, beryl and Carbonate minerals. Fluid inclusions in quartz, fluorite, beryl, scheelite and calcite have filling temperature ranges of $170-353^{\circ}C$. According to the studies of mineral paragenesis and filling temperature of fluid inclusion indicate that main tungsten and molybdnum mineralization have taken place with the minerals whose filling temperature ranges 205 to $353^{\circ}C$. Liquid $CO_2$ bearing fluid inclusions are characteristic in the quartz and early fluorite of tungsten and tungsten bearing molybdenum veins but hardly recognized from molybdemun veins. Estimated $CO_2$ concentration according to diagram proposed by the Takenouchi ranges from 10 to 20wt%. These facts suggest that tungsten mineralization may be related to the $CO_2$ content of the hydrothermal solution during the mineralizing period.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.223-234
• /
• 1987

This paper describes the mode of occurrence and mineralogical properties of electrum from the Namseong Gold-Silver deposits, for the purpose of obtaining data on the characteristics of the ore deposits and the behavior of gold and silver during the mineralization. The gangue minerals are quartz, calcite, fluorite. Ore minerals are mainly composed of pyrite, sphalerite, chalcopyrite and galena with minor amount of argentite, electrum, pyrargyrite, native silver and unidenfied mineral(Cu-Fe-Ag-S series). Three stage of mineralization recognized are, from early to later, (I) pyrite-electrum stage (II) sphalerite-chalcopyrite-galena-argentite-electrum stage (III) sulfosalts stage. The filling temperature of fluid inclusions in quartz ranges from $225^{\circ}$ to $335^{\circ}C$. The value of sulfur fugacity estimated by means of electrum-tarnish method ranges from $10^{-11.5}$ to $10^{-14}$ atm. The compositional heterogeneity within a single grain with respect to gold concentration is common in the Namseong electrums Chemical composition of electrum ranges generally between 25~45 atom% Au. Its gold content decreases in late stages of mineralization.

• Economic and Environmental Geology
• /
• v.15 no.4
• /
• pp.189-204
• /
• 1982

The Geodo mine is located in the southern limb of the Hambaeg syncline. Geology of the area consists of Paleozoic-Mesozoic sedimentary Rocks and Cretaceous igneous rocks. The important igneous rocks presumably related to skarnization and ore mineralization in the area, are the early granodiorite and the late porphyritic granodiorite. Two mineralogical types of ore deposits are recognized in the area. They are the Fe-Cu deposits in the Myobong formation and the Au-Bi-Cu deposits in the Hwajeol formation. Contact metamorphism due to granodiorite intrusion includes hornfelsization, exoskarnization and endoskarnization. Wall-rock alterations related to the Fe mineralization are grouped into the hydrothermal replacement skarnization and the hydrothermal filling skarnization. Another hydrothermal alteration is associated with the Cu mineralization. Various mineralogical analyses have been applied for the identification of minerals. They include optical microscopy, chemical analysis, etching test, X-ray diffraction, and infrared absorption spectroscopic analyses. The ore minerals in these ore deposits are classified into two groups;hypogene and supergene minerals. Hypogene minerals consist of magnetite, pyrite, chalcopyrite, and chalcocite. Supergene minerals consist of chalcocite, bornite, and geothite. Ore minerals show various kinds of ore texture: open-space filling, exsolution, replacement, and cementation texture. The gangue minerals consist of quartz, diopside, epidote, garnet and plagioclase in the hornfelsic zone, garnet, diopside, scapolite, actinolite, sericite, chlorite, quartz, and calcite in the skarn zone, and, epidote, chlorite, sericite, quartz, and calcite in the late hydrothermal alteration zone. This study shows that the Fe-Cu deposits are of metasomatic pipe type with the later hydrothermal fillings, and the Au-Bi-Cu deposits are of hydrothermal fissure-filling type. The mineralization is probably related to the intrusion of porphyritic granite.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.227-237
• /
• 1986

The Duk-Eum mine located in Kongsan-myeon, Naju-gun, Cheolanamdo is producing silver ore mainly, with rare gold association. The grade-up and recovery of the concentrates have been concerned to the main problem. And then, this study aimed at applying the basic data for ore processing. In the first half of the study, the attempts were made to identify the ore minerals, this followed by determination of the mineral texture, paragenesis, grain size, and size distribution by employing the microscopical method and the etching test. The results of the study are as follows: 1. The ore deposit is composed of the hydrothermal fissure linked veins, and filling cavities are mostly tensile fractures or joints, in rhyolitic rocks as a wall rock. 2. The principle ore minerals are native silver, acanthite, canfieldite, pyrargyrite, galena, tetrahedrite, sphalerite, pyrrhotite, chalcopyrite, chalcocite, covellite, zincite, and the gangue minerals are quartz and calcite. 3. The grain size of each ore minerals before grinding are; max. $2\frac{1}{2}$ mesh, medium 48-100 mesh(main size, contained over 80%), min. 3200mesh. And the grain size of each ore minerals after grinding is; max. 42mesh, medium 65-250mesh(main size, contained over 80%), min. 3200mesh. 4. The properties of the mineral texture effected on the ore dressing are follows; a) Inclusion texture; the fine grains of chalcopyrite is included in most acanthite, and rarely, that of galena included in acanthite. b) Exsolution texture; pyrargyrite is exsolved in acanthite. c) Replacement texture; native silver replaced pyrargyrite, and acanthite replaced galena. d) Interlocking paragenetic texture; the interlocking paragenetic minerals are pyrite, chalcopyrite, chalcocite, canfieldite. e) Fissure filling texture; chalcopyrite was filled along the cracks in acanthite. Among of the above texture, it is impossible to liberate the grains of a), and more difficult to liberate those of b) and c), while easy to liberate those of d) and e).

• Economic and Environmental Geology
• /
• v.10 no.1
• /
• pp.1-18
• /
• 1977

Chongyang tungsten ore deposits, one of the most important tungsten mines in South Korea, me open space filling hydrothermal vein deposits embedded in Precambrian biotite gneiss and, Cretaceous (?) granite porphyry. Some wolframite-bearing quartz veins are closely associated with -quartz porphyries which strike about $N15^{\circ}-25^{\circ}W$ and dip $800^{\circ}SE$ to vertical. Mineralization took place in near vertical vein systems of 5 to 2000 meter long in the biotite gneiss and granite porphyry stock during early Cretaceous and Tertiary (?) period. The hydrothermal mineral paragensis has indicated that there were two major stages: vein and vug stages. The principal vein mineral is wolframite in a gangue of quartz with small amount of fluorite, pyrite, beryl and carbonate minerals. Present in minor amounts are molybdenite, bithmuthinite, native bismuth, arsenopyrite, galena, chalcopyrite, pyrrhotite, sphalerite and scheelite. Fluid inclusion study from the minerls at Chongyang mine reveals that vein stage fluids attained a temperature range of $200^{\circ}C-355^{\circ}C$ and vug stage $160^{\circ}C-350^{\circ}C$. The filling temperatures show the higher range of $200^{\circ}-355^{\circ}C$ in quartz and $280^{\circ}C-348^{\circ}C$ in beryls, whereas the lower emperature range of $283^{\circ}C-295^{\circ}C$ in rhodochrosite and $160^{\circ}-253^{\circ}C$ in fluorites. These temperatures are in reasonably good agreement with mineral paragnesis in this ore deposits. Volfamite minerals were analysed for major components. $WO_3$, MnO and FeO by wet chemical method. Chemical analysis indicates that they contain 70.56-71.54% $WO_3$, 8.52-10.01% MnO and 10.00-11.58% FeO. MnO/FeO ratios of wolframites shows the range of 0.78-0.94 which maybe indicates a comparatively high temperature type of hydrothermal deposits.

• Economic and Environmental Geology
• /
• v.5 no.3
• /
• pp.133-144
• /
• 1972

The mine of our present concern is situated at Shim-ri, Gusan-myon, Changwon-gun, Kyongsang-namdo, with lattitude $128^{\circ}35^{\prime}{\sim}36^{\prime}N$ and longitude $35^{\circ}03^{\prime}{\sim}04^{\prime}E$. This mine has not been noticed until the intermittent geological survey for the ore deposits were initiated from September, 1967 till 1970. The main mineralized zones, No.1 and No.2 zones, were studied by the diamond drilling of 9 holes down to the total depth of 1,140m, and found to have ore reserves of Cu 1.99% ore, estimated to reach around $358,000{\frac{M}{T}}$ (proved $117,000{\frac{M}{T}}$, indicated $241,000{\frac{M}{T}}$), which triggered the new exploitation of this mine. Geological composition of the district near the mine is mainly from the andesite belonging to the Silla Series of Kyongsang System and the distribution is broadly spread. Ore deposits are the hydrothermal one, filling the shear zone formed alongside the andesite main joint. There are two stripes of copper bearing mineralized zone which are about 40~70 meters apart and parallel to each other, in addition to which two others are expected. The strike of the main mineralized zone lies at $N15^{\circ}{\sim}20^{\circ}W$, the dip at $60^{\circ}{\sim}70^{\circ}NE$. The principal components of the ore mineral are chalcopyrite, bornite and as secondary, cuprite, tenorite, azurite and malachite. Pyrite, magnetite, specular hematite, very little of galena, sphalerite, quartz, epidote, zoisite, chlorite and calcite are found as gangue mineral. Confirmed by the drilling, the main mineralized zone, No.1 zone, has the length of 320m, average width of 1.62m, Ag 26g/t, Cu 1.84% and the average width of the ore zone except the narrow barren andesite horse interposed in the mineralized zone is 1.32m with Ag 32g/t and Cu 2.26%. The mineralized zone No.2 is 340m long, 1.00m wide with Ag 30g/t and Cu 2.15%. Neglecting the barren andesite horse the width is 0.73m with Ag 42g/t and Cu 2.94%.

• Economic and Environmental Geology
• /
• v.2 no.1
• /
• pp.13-33
• /
• 1969

The Mulkum mine, located in Mulkum-myon, Yangsan-Kun, Kyeongsang Province, is one of the biggest iron mine in Korea. The geology of this mine and its vicinity consists of Chusan andesitic rocks and Datae-dong andesite porphyry of the Kyeongsang System which were intruded by biotite granite widely distributed near the vicinity of Mulkum-ni. The ore deposits, embedded in Dotae-dong andesite porphyry, are fissure-filling vein type in origin. Up to present ore bodies of Main vein, No. 2 vein, Eastern No. 1, 2 vein and Western No. 1 vein are exploited. Generally the veins strike N 10-25 E and dip to 60-90 SE. The proved length of vein is more than 500 meters and its depth 150 meters in Main vein with 3-4 meters of thickness in average. Ore minerals are mainly magnetite and locally associated with small amounts of hematite, sphecularite and chalcopyrite. Gangue minerals are quartz, epidote, chlorite, pyroxene, and garnet, etc. The modes of occurrence of vein are as follow; 1. Branching and parallel vein patterns are observed around main shaft in -1 level. 2. Multiple cymoid loops and subrectangular vein patterns are observed around main shaft in -2 level. 2. Single vein patterns are observed in -3 and -5 level. The ore-shoots plunge northeasterly about 20-30 degrees. In conclusion, the tectonically fractured zone belongs to the poorly mineralized zone and shoots are formed as single vein type. The general trends of one-shoots must be applied the prospecting of the deep-seated ore body in the deposits.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.63-69
• /
• 2022

In this study, mechanical grinding using a planetary ball mill was performed under various conditions to evaluate its effect on the crystal structure of vanadium titanium magnetite (VTM) ore from the Kwain Mine in South Korea. The crystal structure of the activated product was also evaluated. Magnetite and ilmenite were identified as the main types of VTM ore used in the Kwain Mine, and the main types of gangue minerals were iron-based silicate minerals. According to the mechanical activation results, the crystallinity and crystal size decreased as the size of the grinding media (balls) decreased, and the amorphization of the sample/ball filling was significant as the amount of the sample was reduced. In addition, as the grinding speed and time increased, the crystal structure significantly changed, proving that these two parameters had a greater effect on the crystal structure than the ball size and sample/ball filling ratio.