• Journal of Korean Vacuum Science & Technology
• /
• 제1권1호
• /
• pp.30-37
• /
• 1997

Interactions of Cu films with Si substrates separated by thin layers of molybdenum and molybdenum nitride were investigated in the viewpoint of diffusion barrier to copper. the diffusion barrier behavior of the layers was studied as functions of deposition and annealing conditions by cross-sectional transmission electron microscopy and Nomarski microscopy. the layers deposited at $N_2$ gas ratios of 0.4 and 0.5 exhibited good diffusion barrier behaviors up to $700^{\circ}C$, mainly due to the phase transformation of molybdenum to $\gamma$-Mo$_2$N phase. The increase in the N gas ratio in deposition elevates the lower limit of barrier failure temperature. Futhermore, amorphous molybdenum nitride films deposited at 20$0^{\circ}C$ and 30$0^{\circ}C$ did not fail, while the crystalline $\gamma$-Mo$_2$N films deposited at 40$0^{\circ}C$ and 50$0^{\circ}C$ showed signs of interlayer interactions between Cu and Si after annealing at 75$0^{\circ}C$ for 30 minutes. Therefore, the amorphous nature of the molybdenum nitride layer enhanced its ability to reduce Cu diffusion and its stability as a diffusion barrier at elevated temperatures.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.8-11
• /
• 2017

Binary Ti-Al alloys containing 50 to 60 atomic percent aluminum are rapidly solidified by hammer anvil method under an argon atmosphere. Constituent phases in each alloy are identified by X-ray diffractometry and microstructures of the alloys are investigated using a transmission electron microscope. In alloys with aluminum content between 50 and 54 percent, a second phase exists besides TiAl(${\gamma}$); this second phase is identified as $Ti_3Al$(${\alpha}2$). The ${\alpha}2$ phase is observed in two types of morphology. One is as fine lamellar alternating with ${\gamma}$ and the other is as a particle. It is concluded that the existence of a metastable phase with the morphologies stated above should arise from a higher quenching rate attained by the hammer anvil method as compared to the conventional roll or splat-quench method. Implications of the above observation are discussed with respect to the phase relations in the Ti-Al binary system; these implications are still controversial in many respects.

• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.53-60
• /
• 2015

Laser surface Melting Process is getting hardening layer that has enough depth of hardening layer as well as no defects by melting surface of substrate. This study used CW(Continuous Wave) Yb:YAG and STD11. Laser beam speed, power and beam interval are fixed at 70mm/sec, 2.8kW and 800um respectively. Hardness in the weld zone are equal to 400Hv regardless of melting zone, remelting zone overlapped by next beam and HAZ. Similarly, microstructures in all weld zone consist of dendrite structure that arm spacing is $3{\sim}4{\mu}m$, matrix is ${\gamma}$(Austenite) and dendrite boundary consists of ${\gamma}$ and $M_7C_3$ of eutectic phase. This microstructure crystallizes from liquid to ${\gamma}$ of primary crystal and residual liquid forms ${\gamma}$ and $M_7C_3$ of eutectic phase by eutectic reaction at $1266^{\circ}C$. After solidification is complete, primary crystal and eutectic phase remain at room temperature without phase transformation by quenching. On the other hand, microstructures of substrate consist of ferrite, fine $M_{23}C_6$ and coarse $M_7C_3$ that have 210Hv. Microstructures in the HAZ consist of fine $M_{23}C_6$ and coarse $M_7C_3$ like substrate. But, $M_{23}C_6$ increases and matrix was changed from ferrite to bainite that has hardness above 400Hv. Partial Melted Zone is formed between melting zone and HAZ. Partial Melted Zone near the melting zone consists of ${\gamma}$, $M_7C_3$ and martensite and Partial Melted Zone near the HAZ consists of eutectic phase around ${\gamma}$ and $M_7C_3$. Hardness is maximum 557Hv in the partial melted zone.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.1809-1817
• /
• 2012

Background: Gastric cancer is frequently lethal despite aggressive multimodal therapies, and new treatment approaches are therefore needed. Retinoids are potential candidate drugs: they prevent cell differentiation, proliferation and malignant transformation in gastric cancer cell lines. They interact with nuclear retinoid receptors (the retinoic acid receptors [RARs] and retinoid X receptors [RXRs]), which function as transcription factors, each with three subclasses, ${\alpha}$, ${\beta}$ and ${\gamma}$. At present, little is known about retinoid expression and influence on prognosis in gastric cancers. Patients and Methods: We retrospectively analyzed the expression of the subtypes RARa, $RAR{\beta}$, $RAR{\gamma}$, RXRa, $RXR{\beta}$, $RXR{\gamma}$ by immunohistochemistry in 147 gastric cancers and 51 normal gastric epithelium tissues for whom clinical follow-up data were available and correlated the results with clinical characteristics. In addition, we quantified the expression of retinoid receptor mRNA using real-time PCR (RT-PCR) in another 6 gastric adenocarcinoma and 3 normal gastric tissues. From 2008 to 2010, 80 patients with gastric cancers were enrolled onto therapy with all-trans-retinoic acid (ATRA). Results: RARa, $RAR{\beta}$, $RAR{\gamma}$ and $RXR{\gamma}$ positively correlated with each other (p < 0.001) and demonstrated significantly lower levels in the carcinoma tissue sections (p < 0.01), with lower $RAR{\beta}$, $RAR{\gamma}$ and RXRa expression significantly related to advanced stages (p < =0.01). Tumors with poor histopathologic grade had lower levels of RARa and $RAR{\beta}$ in different histological types of gastric carcinoma (p < 0.01). Patients whose tumors exhibited low levels of RARa expression had significantly lower overall survival compared with patients who had higher expression levels of this receptor (p < 0.001, HR=0.42, 95.0% CI 0.24-0.73), and patients undergoing ATRA treatment had significantly longer median survival times (p = 0.007, HR=0.41, 95.0% CI 0.21-0.80). Conclusions: Retinoic acid receptors are frequently expressed in epithelial gastric cancer with a decreased tendency of expression and RARa may be an indicator of a positive prognosis. This study provides a molecular basis for the therapeutic use of retinoids against gastric cancer.

• KSBB Journal
• /
• 제14권4호
• /
• pp.422-428
• /
• 1999

Alcaligenes latus 유래의 phbC 유전자를 A. eutrophus에 재도입시킨 형질전환균주를 이용하여 높은 4HB 몰분율을 갖는 P(3HB-4HB)의 고농도 생산을 시도하였다. 형질전환균주는 총균체량, P(3HB-4HB) 농도, 그리고 축적률에서 모균주에 비해 다소 증가한 반면 P(3HB-4HB)내의 4HB 몰분율은 23.5 mol%로 모균주의 12.3 mol%에 비해 현저히 증가하였다. 이는 phbC유전자의 증폭으로 인해 해당과정에서 생성된 3HB와 전구물질인 ${\gamma}$-butyrolacton에서 전환된 4HB의 중합반응이 촉진되기 때문으로 사료된다. 또한 ${\gamma}$-butyrolacton의 농도 $Mg^{2-}$ 이온, 그리고 citrate 첨가량이 P(3HB-4HB)의 농도, 축적률, 그리고 4HB 몰분율에 미치는 영향을 검토하였다. P(3HB-4HB)내의 4HB 몰분율을 증대시키기 위하여 일반적으로 사용되는 2단계 배양법을 변형시켜 ${\gamma}$-butyrolacton과 citrate의 첨가시기를 늦춘 2단계 배양법을 활용하여 P(3HB-4HB)내의 4HB 몰분율을 61.0 mol%로 증가시킬 수 있었다. 또한 ${\gamma}$-butyrolacton의 첨가량을 조절하여 P(3HB-4HB)내의 4HB 몰분율이 92.0 mol%에 이르는 homopolymeric P(4HB)를 생산할 수 있었으며, 그 구조를 $^1$H-NMR을 통해 확인하였다.

• 한국주조공학회지
• /
• 제32권3호
• /
• pp.138-143
• /
• 2012

This steel has been synthesized integrating concepts from Austempering Ductile Cast Iron (ADI) technology. While ADI has excellent mechanical and physical properties, the Young's modules of ADI is approximately 20% lower than steel. In addition, the presence of graphite nodules in ADI can be sites of crack initiation, where fracture takes place at graphite matrix interface. Because of this limitations of ADI, there has been a growing interest in austempered steels as structural materials in resent years. In this investigation, a new steel with microstructure composed of ferrite and austenite and with simultaneous high tensile strength (1,150 MPa) and high ductility (33%) was developed. The goal of this investigation is to obtain a better understanding of deformation and transformation behaviour in high carbon retained austenite(${\gamma}_{HC}$) and over-saturated ferrite(${\alpha}$) during the plastic deformation. A detailed study of the microstructure of this steel was carried out by means of X-ray diffraction (XRD) and electron back scattering diffraction (EBSD) technic. In this way it was shown that BCC phase (BCC) took up the larger part of the nominal strain whereas the a part of retained austenite responded to the mechanincal load by partial martensite transformation, and misorientation change in the retained austenite after plastic strain could be attributed to the large elongation.

• 한국식품과학회지
• /
• 제50권3호
• /
• pp.249-259
• /
• 2018

Radiation technology (RT) has long been applied in various fields for increasing the safety and shelf-life of foods by controlling pathogen-induced poisoning. RT was introduced for the first time in Korea in the 1950s to eliminate harmful microorganisms in food materials. In the 1980s, RT had been scientifically proven to be effective for the sterilization of food and public health products. In recent years, irradiation with gamma rays has also been used for improving physiological properties through the structural modification of natural molecules, which has been proposed to be applicable to various industries. In particular, radiation transformation technology (RTT), which involves the development of new functional compounds through the molecular conversion of natural biomaterials, is becoming a new high-value technology as a fusion technique of RT and biotechnology. The present reports have suggested that RTT can be an effective tool for the development of new functional compounds and improvement of the physiological activity of biomolecules.

• 열처리공학회지
• /
• 제18권2호
• /
• pp.99-104
• /
• 2005

In this study, the effects of C and Si on damping capacity and mechanical properties of as-cast and as-rolled Fe-17%Mn alloys were investigated as a basic study for the purpose of the commercialization of the alloy. The $M_s$ temperature of ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation in Fe-17%Mn alloy was decreased with increasing C and Si contents, resulting in the less volume fraction of ${\varepsilon}$ martensite. The damping capacity was also decreased with increasing alloying content because of less ${\varepsilon}$ amount and the reduction in mobility of the damping sources such as the stacking fault boundaries and ${\gamma}/{\varepsilon}$ interfaces due to the pinning effect by alloying elements. The mechanical properties of as-rolled alloys were superior to those of as-cast alloys probably because of finer ${\gamma}$ grains, larger amount of ${\varepsilon}$ martensite, and chemical homogeneity.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1045-1053
• /
• 1993

Alumina hydrates were prepared by the neutralization of AlCl3.6H2O solution with NH3 gas diluted with N2 gas. The values of pH in reaction solution influenced the formation of alumina hydrates minerals. Amorphous alumina hydrates, for example, were formed at ${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. (2) Bayeritelongrightarrowamorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrowη-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. On the other hand, the shape of alumina hydrates whichw ere prepared by the reacton of Al2(SO4)3.16H2O solution and NH3 gas was spherical, the progress of its phase transformation with increasing temperature was amorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\alpha$Al2O3 in sequence.

• 한국지능시스템학회논문지
• /
• 제23권2호
• /
• pp.172-177
• /
• 2013

BCI (Brain Computer Interface)는 인간의 뇌에서 측정된 EEG (Electroencephalogram)를 활용하여 의수와 같은 기기를 조종할 수 있는 좋은 방법 중 하나이다. 본 논문에서는 EEG와 힘과의 관계를 알아보고자 최대수축악력 (MVC)의 25%, 50%, 75%로 3개의 등급으로 나누어 EEG 변화를 측정하였다. 얻어진 EEG data를 FFT와 power spectrum analysis로 ${\alpha}$, ${\beta}$, ${\gamma}$파로 나누어 각 파형의 파워 값을 구한 뒤, 구해진 EEG 파워 값을 PCA와 LDA를 사용하여 특징 추출 및 분류를 하였다. 실험 결과 25%의 악력을 가할 때 보다 75%의 악력 때 더 높은 EEG 파워의 증가를 확인하였고, 왼손과 오른손은 각각 52.03%와 77.7%의 분류율을 나타내었다.