• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.140-146
• /
• 2002

High speed rotating machines can be very sensitive to rotating mass unbalance that is a major source of harmful vibration for many types of rotating machinery. So, the balancing procedure is needed for all high-speed rotating system. To save the time and cost of off-line balancing, many researchers have developed the on-line balancing devices and methods. In this paper, an active balancing device, which is an electro-magnetic type, is developed and the active balancing algorithm using influence coefficient method is also proposed. The active balancing experiment for flexible rotors during operation is performed by an active balancing device. As a result, controlled unbalance responses are below the vibration limit at all rotating speed ranges with critical speed.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권8호
• /
• pp.376-383
• /
• 2001

Factors leading to poor control of the steam generator in a nuclear power plant are nonminimum phase characteristics, unreliable of flow measurements and nonlinear characteristics, which increase more at low power(below 20%) operation. And the study of problems for water level control in the steam generator is that design water level controller only power renge, not entire. This paper introduces a model predictive control(MPC) algorithm for solving poor control factors and quadratic programming(QP) for solving input constraints. Also presents the design method of stable model predictive controller in the entire power range. The simulation results show the efficiency of proposed MPC controller by comparing with PI controller, and effect of the design parameters.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.127-137
• /
• 1999

This study is concerned with the loading problems in flexible manufacturing system(FMS). The loading problem in FMS is a complex one, when the number of machine and job is increased. It may be time-consuming and even impossible to achieve an optimal solution about this problem mathematically. Thus, a heuristic method is recommended in order to gain near-optimal solutions in a practically acceptable time. A new loading algorithm is developed with a multi-criterion objective of considering the workload unbalance, and maximizing the machine utilization, throughput for critical resources such as the number of tool slots and the number of working hours in a scheduling period and so on. The results of SAS analysis indicated that true average throughput of proposed heuristic loading statistically exceeds that of Shanker and Srinivasulus loading algorithm at the significance level of 0.1.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.589-596
• /
• 2001

In this paper, a new design methodology for the optimal control of nonlinear systems described by the TS(Takagi-Sugeno) fuzzy model is proposed. First, a new theorem concerning the optimal stabilizing control of a general nonlinear dynamic system is proposed. Next, based on the proposed theorem and the inverse optimal approach, an optimal controller synthesis procedure for a TS fuzzy system is given, Also, it is shown that the optimal controller can be found by solving a linear matrix inequality problem. Finally, the proposed method is applied to the attitude control of a rigid spacecraft to demonstrate its validity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.205-209
• /
• 1998

A synthesis of fuzzy variable structure control is proposed to design a high-angle-of-attack flight system for a modification version of the F-18 aircraft. The knowledge of the proportional, integral, and derivative control is combined into the fuzzy control that addresses both the highly nonlinear aerodynamic characteristics of elevators and the control limit of thrust vectoring nozzles. A simple gain scheduling method with multi-layered fuzzy rules is adopted to obtain an appropriate blend of elevator and thrust vectoring commands in the wide operating range. Improving the computational efficiency, an accelerated kernel for on-line fuzzy reasoning is also proposed. The resulting control system achieves the good flying quantities during a high-angle-of- attack excursion. Thus the fuzzy logic can afford the control engineer a flexible means of deriving effective control laws in the nonlinear flight regime.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.265-272
• /
• 1996

In this paper, attitude computation algorithm for a strap down ARS(Attitude Reference System)of an underwater vehicle has been studied. Attitude errors o the ARS using low-level gyroscopes tend to increase with time due to gyroscope errors. To cope with this problem, a mixing algorithm of accelerometer aided attitude computation has been developed. The algorithm can successfully bound the error increase for cruising motion, but it gives instantaneously large errors when a vehicle maneuvers. To improve the performance in case of vehicle's maneuver, a new attitude computation mixing algorithm complying state of vehicle and to manage the adjustment of the gains which are invariant in the existing algorithm. In addition, a gain scheduling method is applied to fuzzy inference composition process for real-time computation. Monte Carlo simulation results show that the proposed algorithm provides better performance than the existing algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.280-283
• /
• 2000

In this paper, a fault tolerant control problem is considered for a class of nonlinear system formulated in a gain scheduling form with LMI-based H-inf control technique Key benefits of this proposed scheme are demonstrated in the simulation of an electromagnetic suspension system with actuator and/or sensor failures, and the method is compared with the convensional state-feedback and output-feedback controller. It is clearly observed that the proposed control scheme shows an improved output performance in comparision with convensional methods.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1024-1031
• /
• 2013

This paper addresses linear quadratic regulation (LQR) for variable speed variable pitch wind turbines. Because of the inherent nonlinearity of wind turbines, a set of operating conditions is identified and then a LQR controller is designed for each of the operating points. The feedback controller gains are then interpolated linearly to get a control law for the entire operating region. In addition, the aerodynamic torque and effective wind speed are estimated online to get the gain-scheduling variable for implementing the controller. The potential of this method is verified through simulation with the help of MATLAB/Simulink and GH Bladed. The performance and mechanical load when using LQR are also compared with those obtained when using a PI controller.

• 항공우주기술
• /
• 제7권2호
• /
• pp.162-169
• /
• 2008

추력제어를 목적으로 제작된 제어밸브를 AMESim 시뮬레이터를 통해 모델링을 수행했다. 제어밸브와 유사하게 모델링하여 여러 물리적인 동특성을 시뮬레이션을 통해 예측했다. BLDC 모터를 이용하는 제어밸브 제어를 위하여 속도제어기법을 제안했으며, 시뮬레이션 및 시험을 통해 그 성능을 증명했다. 제어밸브에 대한 2차 필터(Pre-Filters)를 사용하여 적절한 안정성 이득을 확보했다. BLDC 모터의 속도제어 기법을 이용하는 제어밸브는 PI 게인 스케줄링 기법 보다 시스템 활용 시 용이하고, 유량제어 시험결과를 통해 시스템에 적용 가능성을 시사했다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1655-1673
• /
• 2018

Mobile computing environment is subject to the constraints of bounded network bandwidth, frequently encountered disconnections, insufficient battery power, and system asymmetry. To meet these constraints and to gain high scalability, data broadcasting has been proposed on data transmission techniques. However, updates made to the database in any broadcast cycle are deferred to the next cycle in order to appear to mobile clients with lower data currency. The main goal of this paper is to enhance the transaction performance processing and database currency. The main approach involves decomposing the main broadcast cycle into a number of sub-cycles, where data items are broadcasted as they were originally sequenced in the main cycle while appearing in the most current versions. A concurrency control method AOCCRBSC is proposed to cope well with the cycle decomposition. The proposed method exploits predeclaration and adapts the AOCCRB method by customizing prefetching, back-off, and partial backward and forward validation techniques. As a result, more than one of the conflicting transactions is allowed to commit at the server in the same broadcast cycle which empowers the processing of both update and read-only transactions and improves data currency.