• 제목/요약/키워드: gain ratio

검색결과 2,441건 처리시간 0.029초

바이오 플러스의 급여가 육계의 생산성과 장내 미생물에 미치는 영향 (Influence of Dietary Supplemental Bio-Plus on Performance and Intestinal Microflora of Broiler Chicks)

  • 류경선;김은성;정해원;김상호
    • 한국가금학회지
    • /
    • 제28권1호
    • /
    • pp.61-67
    • /
    • 2001
  • Two experiments were conducted to evaluate the dietary supplemental fruit extract(Bio-plus) on performance and intestinal microflora of broiler chicks. Seven treatments were allocated into control, 0.05, 0.10, 0.20, 0.10, 0.20, 0.40, 0.80, 1.60% with four replications for five weeks, in both experiments. Diets contained 21.5% CP, 3, 100 kcal/kg ME for the rest two weeks. Weight gain, feed intake, feed conversion ratio(FCR) were weekly measured. Birds were sacrificed to examine the E. coli and Salmonella from cecum and ileum at the end of experiment. In experiment 1, Weight gain of Bio plus treatments tended to increase compared to that of control, but was not consistency between them. Chicks fed Bio-plus showed significantly lower feed conversion ratio(FCR) than control(P〈0.05). In experiment 2, Weight gain of Bio plus treatments was significantly different from control(P〈0.05) for starting period and linearly increased upto 0.80% for the rest of two weeks, but was not significantly different. Feed intake of chicks fed Bio-plus tended to be higher than control. Bio-plus treatments was not statistically different FCR from control. ND titer showed no significance, but tended to be higher in Bio-plus treatments than control. The number of ileum salmonella was significantly decreased in Bio-plus treatments compared to that of control in expt 2 (P〈0.05). Total yeast and Lactobacillus spp. of illeum tended to increase in expt 1 and were significantly higher in expt 2 than control(P〈0.05). The results of these experiment indicated that dietary Bio-plus supplements increased weight gain, the number of ileum yeast and Lactobacillus spp. of broiler chicks.

  • PDF

간섭과 잡음이 존재하는 Hard-Limiting 위성채널상에서의 DS-BPSK신호의 오율특성 (Error Rate Performance of DS-BPSK Signal transmitted through a Hard-Limiting Satellite Channel in the presence of Interference and Noise)

  • 신동일;조성준
    • 한국통신학회논문지
    • /
    • 제11권1호
    • /
    • pp.64-72
    • /
    • 1986
  • 동일채널간섭(cochannel interference)과 다운링크(downlink) 가우스성잡음이 존재하는 환경하에서 비선형 위성 트랜스폰더(transponder)를 통과하는 DS-BPSK(Direct Sequence Binary Phase Shift Keying)신호의 오율식을 구했다. 이 때 위성 트랜스폰더의 입력으로는 DS-BPSK신호와 스펙트럼 확산된 광대역의 동일채널간섭신호와의 합성파를 가정하였다. 구해진 오율식에 의한 계산결과는 반송파 대 간섭파 전력 비(CIR), 다운링크 신호 대 잡음 전력 비(downlink SNR) 그리고 처리이득(process gain)을 파라미터로 하여 그래프로 나타내고 분석했다. 그 결과, DS-BPSK신호와 간섭신호가 하드 리미터(hard limiter)특성의 트랜스폰더를 통과하게 되면 수신기의 복조단에서는 처리이득을 증가시키더라도 개선되어 지지 않는 협대역의 상호 변조적 성분이 생긴다는 것을 알 수 있었다. 오율면에서는 CIR이 낮을 경우(약 10dB이하) 에는 CIR의 증가에 따른 오율 개선도가 현격하지만 약 20dB이상의 경우에서는 별다른 개선 효과가 없었다. 또한 처리이득의 경우는 일정한 오율값에 대해 처리이득을 약 10배 증가시키므로써 약 10dB 정도의 다운링크 SNR개선을 얻을 수 있었다.

  • PDF

유전 알고리즘을 이용한 스튜어트 플랫폼의 최적 PID 제어 게인 선정을 위한 실험적 접근 (Experimental approach for selecting an optimal PID control gain using genetic algorithm for stewart platform)

  • 박민규;홍성진;이민철
    • 제어로봇시스템학회논문지
    • /
    • 제6권1호
    • /
    • pp.73-80
    • /
    • 2000
  • The stewart platform manipulator proposed by stewart is the parallel manipulator which is composed of several independent actuators connecting the upper plate with the base plate and capable of executing a six degree of freedom motion. The manipulator has a structure of a closed loop form, and provides better load-to-weight ratio and ratio and rigidity than a serial manipulator with an open loop form. Moreover, the manipulator has high positional accuracy because position errors of actuators are not additive. Because of these advantages, this manipulator is widely used in many engineering applications such as a driving simulator, a tool of machining center, a force/torque sensor and so on. When this Stewart platform manipulator is controlled in joint space, it is difficult to design a controller using an analytic method due to nonhnearity and unknown parameters of actuators. Therefore, a PID controller is often used because of easiness in applications. To find the PID control gain, a trial-and-error method is generally used. This method is time-consuming, and does not guarantee a optimal gain. Thus, this paper proposes a GA-PID controller which selects an optimal PID control gain using genetic algorithms. And this proposed controller is evaluated experimentally and shows acceptable performance.

  • PDF

영이 아닌 DC값을 가지는 Discrete Cosine Transform을 이용한 CT Reconstruction (CT Reconstruction using Discrete Cosine Transform with non-zero DC Components)

  • 박도영;유훈
    • 전기학회논문지
    • /
    • 제63권7호
    • /
    • pp.1001-1007
    • /
    • 2014
  • This paper proposes a method to reduce operation time using discrete cosine transform and to improve image quality by the DC gain correction. Conventional filtered back projection (FBP) filtering in the frequency domain using Fourier transform, but the filtering process uses complex number operations. To simplify the filtering process, we propose a filtering process using discrete cosine transform. In addition, the image quality of reconstructed images are improved by correcting DC gain of sinograms. To correct the DC gain, we propose to find an optimum DC weight is defined as the ratio of sinogram DC and optimum DC. Experimental results show that the proposed method gets better performance than the conventional method for phantom and clinical CT images.

위상 천이 조정 DFB 파장 가변 필터의 투과 증폭 스펙트럼에 관한 이론적 해석 (Theoretical analysis of the transmission gain spectrum of a phase-shift-controlled DFB tunable filter)

  • 김부균;정기숙;이봉영
    • 전자공학회논문지A
    • /
    • 제33A권7호
    • /
    • pp.205-215
    • /
    • 1996
  • We derive the analytic equations for the transmission gain spectrum of a phase shift controlled (PSC) DFB filters with complexed coupled gratings considering both facet reflections and the phase of gratings using the transfer matrix method. The number of parameters of the equations is reduced by using the parameter of effective phase shift defined by the sum of the phase shift in a PSC region the effect of both facets reflections and the effective phase shift on the transmission gain spectrum and verify the validity of those equations from the computer simulation results. Computer simulation results show the PSC DFB filter with a pure index coupled grating has the widest tunable range and that with a pure gain grating has the largest side mode suppression ratio.

  • PDF

Design Method of a Circularly-Polarized Antenna Using Fabry-Perot Cavity Structure

  • Ju, Jeong-Ho;Kim, Dong-Ho;Lee, Wang-Joo;Choi, Jae-Ick
    • ETRI Journal
    • /
    • 제33권2호
    • /
    • pp.163-168
    • /
    • 2011
  • A Fabry-Perot cavity (FPC) antenna producing both high-gain and circularly-polarized (CP) behavior is proposed. To increase antenna gain and obtain CP characteristics, a superstrate composed of square patches with a pair of truncated corners is placed above the linearly polarized patch antenna with an approximately half-wavelength distance from the ground plane at the operating frequency. The proposed antenna has the advantages of high gain, a simple design, and an excellent boresight axial ratio over the operating frequency bandwidth. Moreover, used in an FPC antenna, the proposed superstrate converts a linear polarization produced by a patch antenna into a circular polarization. In addition, the cavity antenna produces left-hand circular-polarization and right-hand circular-polarization when a patch antenna inside the cavity generates x-direction and y-direction polarization, respectively. The measured and simulated results verify the performance of the antenna.

Lasing Modes of LD-Pumped Fiber Grating Lasers

  • Park, Dong-Wook;Hwang, Joon-Hwan
    • Journal of the Optical Society of Korea
    • /
    • 제6권3호
    • /
    • pp.108-116
    • /
    • 2002
  • Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.

교류변환형 트란지스터식 직류증폭회로에 관한 연구 (The study of a chopper-type transistorized d.c. amplifier circuit)

  • 한만춘;최창준
    • 전기의세계
    • /
    • 제18권5호
    • /
    • pp.12-19
    • /
    • 1969
  • The sensitivity of transistorized d.c. amplifiers is mainly limited by drift at operating point caused by ambient temperature changes. A chopper-type transistorized amplifier is necessary to obtain a high sensitivity without recourse to drift compensation which requires the adjustment of several balancing controls. A chopper-stabilized system consisting of an electro-mechanical chopper for input and output and a high-gain a.c. amplifier is designed and analyzed. The gain of the a.c. amplifier, expressed as the ratio of voltages, is larger than 80db in the band of 50C/S - 100KC/S. The complete system gives an open-loop gain of 68db at direct current. The offset voltage is 20.mu.V referred in input and the voltage drift at the input is less than 10.mu.V/hr at 25.deg.C. This type of amplifier would be useful for the high-gain transistorized d.c. amplifier for analog computers. Also, due to the high input impedance, it is suitable for amplification of signals from wide range of source impedances.

  • PDF

Analysis of Macro-Diversity in LTE-Advanced

  • Kim, Gun-Yeob Peter;Lee, Jung-Ah C.;Hong, Sang-Jin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권9호
    • /
    • pp.1596-1612
    • /
    • 2011
  • Coordinated Multi-Point (CoMP) transmission / reception is being studied in Long Term Evolution-Advanced (LTE-A) for future evolution of the $3^{rd}$ Generation Partnership Project (3GPP) LTE. Support of soft handover is essential for improving the performance of cell edge users. CoMP provides a natural framework for enabling soft handover in the LTE system. This paper evaluates the soft handover gain in LTE-A downlink. Mathematical analysis of signal to interference plus noise ratio (SINR) gain and the handover margins for soft handover and hard handover are derived. CoMP system model is developed and an inter-cell and intra-cell interference model is derived, taking into account the pathloss, shadowing, cell loading, and traffic activity. Reference signal received power (RSRP) is used to define the triggers and the measurements for soft handover. Our results indicate that parameter choices such as handover margin and the CoMP set size impact CoMP performance gain.

Simulation and Experimental Validation of Gain-Control Parallel Hybrid Fiber Amplifier

  • Ali, Mudhafar Hussein;Abdullah, Fairuz;Jamaludin, Md. Zaini;Al-Mansoori, Mohammed Hayder;Al-Mashhadani, Thamer Fahad;Abass, Abdulla Khudiar
    • Journal of the Optical Society of Korea
    • /
    • 제18권6호
    • /
    • pp.657-662
    • /
    • 2014
  • We demonstrate a simulation of a parallel hybrid fiber amplifier in the C+L-band with a gain controlling technique. A variable optical coupler is used to control the input signal power for both EDFA and RFA branches. The gain spectra of the C+L-band are flattened by optimizing the coupling ratio of the input signal power. In order to enhance the pump conversion efficiency, the EDFA branch was pumped by the residual Raman pump power. A gain bandwidth of 60 nm from 1530 nm to 1590 nm is obtained with large input signal power less than -5 dBm. The gain variation is about 1.06 dB at a small input signal power of -30 dBm, and it is reduced to 0.77 dB at the large input signal power of -5 dBm. The experimental results show close agreement with the simulation results.