• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.90-95
• /
• 2008

An SHGC(Solar Heat Gain Coefficient) is a determinant of total flux of solar radiation coming indoor and a critical factor in evaluating heating and cooling load. U-value represents heat loss while SHGC denominates heat gain. Recently, windows with high solar gain, mid solar gain or low solar gain are being produced with the development of Low-E coating technology. This study evaluated changes in energy consumption for heating and cooling according to changes in SHGC when using double-layered Low-E glass and triple layered Low-E glass in relation to double layered clear glass as base glass. An Office was chosen for the evaluation. For deriving optical properties of each window, WINDOW 5 by LBNL, an U.S. based company. and the results were analyzed to evaluate performance of heat and cooling energy on anannual basis using ESP-r, an energy interpretation program. Compared to the energy consumption of the double layered clear glass, the double layered Low-E glass with high solar gain consumed $69.5kWh/m^2,yr$, 9% more than the double layered clear glass in cooling energy. The one with mid solar gain consumed $63.1kWh/m^2,yr$, 1% less than the base glass while the one with low solar gain consumed $57.6kWh/m^2,yr$, 10% less than the base glass. When it comes to tripled layered glass, the ones with high solar showed 2% of increase respectively while the one with mid solar gain and low solar gain resulted 5% and 11% in decrease in energy consumption due to low acquisition of solar radiation. With respect to cooling energy. it was found that the lower the SHGC. the less energy consumption becomes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.75-82
• /
• 2014

For accurate gain tuning of the lab-manufactured six-axis articulated robot RS2 with less noise, in this study, a program routine using dynamic signal analyzer, which is a realization of a controller design algorithm in the frequency domain, is programmed using LabVIEW$^{(R)}$. The contribution of this paper is the proposal of a simulation technique based on SolidWorks$^{(R)}$ and LabVIEW$^{(R)}$ for the gain tuning of a six-axis articulated robot. To realize the simulation, the LabVIEW$^{(R)}$ program used for experimental gain tuning is incorporated in to SolidWorks$^{(R)}$. A comparison shows that the results of simulation-based gain tuning and experimental gain tuning are almost the same within a 5% error bound. On the basis of the comparison, it can be suggested that the simulation-based technique for gain tuning can be applied instead of experimental gain tuning to a six-axis articulated robot by interlocking SolidWorks$^{(R)}$ and LabVIEW$^{(R)}$.

• 전기의세계
• /
• v.29 no.7
• /
• pp.455-459
• /
• 1980

The gain change of the photomultiplier which occurs as the count rate increased was examined. and simple feedback resistor series was introduced between 7th and 9th dynode for compensating the gain change. The effect of the feedback resistor series was considerably good to reduce the gain change. With the feedback resistor, the gain change was only 1.9%, when count rate was increased from 514 CPS (counts per second) to 1250 CPS. Without the feedback resister, the gain change was 6.9%, when the count rate was increased from 530 CPS to 1250 CPS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.988-993
• /
• 2009

In this paper, we deal with a tracking gain-up controller design problem to control effectively the shake of tracking actuator after a track seek. A minimum tracking gain-up open-loop gain can be calculated by estimating the shake of tracking actuator and a desired transient specification is considered to diminish effectively the shake of actuator. A tracking gain-up controller is designed by considering a robust $H_{\infty}$ control problem with a regional stability constraint. The proposed tracking gain-up controller design method is applied to the track-following system of a DVD recording device and is evaluated through the experimental results.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.3
• /
• pp.39-49
• /
• 2000

During human-computer interaction(HCI), people typically send inputs to computers through electromechanical pointing devices. Many applied studies have therefore evaluated cursor-positioning movements made with various pointing devices. Though there were so many studies about performance of various pointing devices, it was nearly impossible to compare device performance each other until the Fitts' law was applied. It does appear that Fitts' law may predict performance reasonably well for the one C-D gain level. But in varying C-D gain levels, Fitts' law could not predict movement time. This study investigated the effects of C-D gain in mouse movement time and suggested a revised Fitts' model including C-D gain as an independent variable. The revised Fitts' model may use to measure the performance of various devices in varying C-D gain levels.

• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.67-73
• /
• 1991

The unsaturated signal gain, signal gain bandwidth, and saturation power which are important parameters determining characteristics of the semiconductor laser amplifier were measured for an AlGaAs Fabry-Perot cavity type laser amplifier and compared with the results of Fabry-Perot formula. The unsaturated signal gain 25 dB is obtained near oscillation thereshold current at $0.7\mu\textrmW$ input power. The corresponding signal gain bandwidth was about 3 GHz. Also. We measured the variation of the saturation signal gain and saturation power.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.14-18
• /
• 2000

We have investigated gain flattening of EDFA systems with or without a gain equalizer for WDM long-haul transmission using a re-circulating EDFA loop. Without a gain equalizer, gain variation as small as 2.9 dB was achieved over the 10-nm band of a 100 cascaded EDFA system by the inversion principle. With a gain equalizer based on all-fiber acousto-optic tunable filters, two different config-urations of EDFAs were tested. For a single-stage EDFA scheme, the 21-nm band has shown 3.8 dB of gain variation at 17.4 ∼ 20.3 dB of OSNRs after the 100the stage of EDFAs. For a dual-stage EDFA scheme, a wider bandwidth of 34 nm has shown 3.6-dB variation after 40 cascaded EDFAs.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2018

The impact of the amplified spontaneous emission (ASE) on the gain recovery time of a bulk semiconductor optical amplifier (SOA) is investigated. The gain-recovery time is obtained by determining the time evolution of the gain, carrier density, and ASE in an SOA, after the propagation of a short pump pulse and continuous-wave (CW) probe of gain dynamics. In the simulation, a wide-band-semiconductor model, which can be characterized by the material gain coefficient over a wide wavelength range, is used, because the gain bandwidth of a practical SOA is very wide. The pump pulse and counterpropagating CW probe field are considered in the simulation, with the ASE noise spectrum equally divided.

• Journal of Yeungnam Medical Science
• /
• v.15 no.1
• /
• pp.135-142
• /
• 1998

Maternal weight gain during pregnancy has been consistently associated with infant birth weight and pregnancy outcome. Our purpose was to determine the relationship between maternal weight gain pattern and birth weight. Consequently, maternal weight gain is monitored carefully and is encouraged during prenatal care in order to improve pregnancy outcome. Our study group included both 424 uncomplicated women and infant delivered at the Yeungnam University Hospital between 1993-1996. All recorded prenatal weight gain measurements were used to estimate maternal trimester weight gain, pattern of gain (based on low versus not-low gain at each trimester), and total gain at delivery. Multiple linear regression analysis was used to assess the relationship between these weight gain measurements and fetal birth weight. Each kilogram of maternal gain in the first, second, and third trimesters was associated with statistically related to the increase in fetal birth weight by 31.3, 19.0, and 24.5g, respectively. When compaired with the pattern of gain that was not low in any trimester, patterns with low gain in the first trimesters were associated with significant decreases in birth weight, but no important change in birth weight was seen for the group whose gains were not low in the first trimester. The results suggest that specific patterns of maternal weight gain, particularly weight gain during the first trimester, are related to fetal birth weight.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.199-206
• /
• 2007

Capital gain comes from the transfer gain which is occurring by transferring assets except inventory assets. Our government recently has made capital gain tax on real estates and imposed as classified income tax by including it into aggregate income so that provide function of tax and curb property speculation. However the present income tax law imposes capital gain tax on capital profit including real estate and securities, while this law and the special tax treatment control law implement non-taxation and tax exemption too widely. That is to say, the system of capital gain tax can hinder the fair tax because it has various exemption terms including the non-taxation principle on a house for a family and the special tax treatment law. And also it has a problem in the sense of equity because it imposes tax by progressive tax rate on the subjects of capital gain tax considering them as the profit of that year, which were transferred, so there is difference between the income which has been made for a long time and the income made for a short time even in the same capital gain. Therefore this study identifies some issues surrounding the present capital gain tax system and focuses on presenting reasonable development plan.