• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.969-973
• /
• 1997

In order to produce transglucosylated steviosides continuously, some types of bioreactors were investigated with cyclodextrin glucanotransferase immobilized on a high porous anion exchange resin, Diaion HPA75. Among the bioreactors, the packed-bed reactor (PBR) showed the highest specific productivity. The effect of linear velocity in a PBR on the stevioside conversion was not significant in the range of $10{\sim}60\;cm/hr$ at the same space velocity of $1.2\;hr^(-1)$. When the space velocity of bioreactor was varied from 0.2 to $1.1\;hr^{-1}$, the optimal velocity of substrate solution was determined as $0.7\;hr^(-1)$. The stevioside conversion of more than 70% was maintained during 20 days in the continuous operation, if about 20% of immobilized enzyme was replaced in the top of reactor after two weeks operation as the one of the control methods in bioreactor. The specific production, which refers to as the amount of commercially valuable transglucosylated steviosides produced by a unit amount of immobilized cyclodextrin glucanotransferase, was found to be ca. 150g product/g immobilized enzyme.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.73-78
• /
• 2018

The main objective of this study was to evaluate the effects of acetate on the cultivation of anabena under mixotrophic condition. Four different types of acetates were used for the anebena cultivation. Among them, ethyl acetate was found to be the most effective and the growth rates linearly increased as the amount of ethyl acetate increased. When 40 mM of ethyl acetate was used, the highest values of specific growth rate of $0.979day^{-1}$ and maximum biomass productivity of $0.293g\;L^{-1}\;d^{-1}$ were obtained. On the contrary, input of acetic acid and butyl acetate inhibited the growth of anabena. For aeration tests, 0.54 vvm was optimum for anabena cultivation. For a semi-continuous cultivation test, ethyl acetate was used after 0.54 vvm test was finished. Then, test continued under 0.54 vvm and 40 mM of ethyl acetate. Lower specific growth rate and maximum biomass productivity were obtained compared to those from batch cultivation tests. However, the greatest maximum concentration of 5.91 g/L was obtained during the semi-continuous cultivation test.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.1
• /
• pp.67-71
• /
• 2000

This study was conducted to determine the characteristics of continuous culture and soil texture and their effect on growth and yield of platycodon. The continuous cropping year was treated from 2-years old to 8-years old. The continuous cropping year was correlated with root weight $Y=17.246X+0.95(R^2=0.948^{{\ast}{\ast}{\ast}})$ and root disease incidence rate $Y=12.01X-5.74(R^2=0.946^{{\ast}{\ast}{\ast}})$. The T-N, $P_2O_5$ and MgO content of root were yearly decresed and those of injury roots were higher than those of normal roots. The 2-years old platycodon was treated different soil texture(Loamy sand, Sandy loam, Silt loam, Clay loam). The shoot weight 10.38g, root diameter 1.34cm, root height 16.8cm and root weight 5.46g at silt loam were higher than other soil texture.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.217-223
• /
• 1993

Methods for production of ${\gamma}$-Polyglutamic acid( ${\gamma}$-PGA ) by an alkalophilic Alcaligenes sP. were investigated for batch and continuous culture processes. Both quantity and productivity of ${\gamma}$-PGA by Alcaligenes sp. in batch culture were gradually increased with the increase of glucose concentration up to 50g/l , but the maximal production yield of 63% was obtained at 10g/l of glucose concentration. The highest specific growth rate was about $0.25hr^{-1}$ at 50un of glucose concentration, and substrate inhibition was observed at above 50g1f of glucose concentration. The highest ${\gamma}$-PGA formation about 11g/l in a batch system was obtained at 31'C, pH 10.0 and 87rpn Productivity of 2.80g/l/hr for continuous cultivation was 9 times higher than the productivity for batch cultivation.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.123-129
• /
• 1999

The utilization methods of algae biomass have been studied constantly in whole world. These are $\circled1$the wastewater treatment if waste stabilization pond and oxidation ditch etc. and $\circled2$the biosorption of heavy metals and recovery of strategic' precious metals and $\circled3$the single-celled protein production and the production of chemicals like coloring agent and $\circled4$the production of electric energy through methane gasification. The culture system also has been developed constantly in relation with such utilization method developments. In the result of experimental operation under continuous and cyclic irradiation of light, using high rate algae biomass culture pond(HRABCP), which had been made so as to be an association system with the various items which had been managed to have high efficiency for algae culture, the algae production of the 12 hours-irradiance pond was 41.48 Chlorophyll-a ${\mu}g/L$ only in spite of having the more chance of $CO_2$ synthesis to algae cell than the 24 hours-irradiance pond. This means that the energy supply required for dark-reaction of photosynthesis is very important like this. The difference of algae production between continuous and cyclc irradiation explains that the dark-reaction of photosynthesis acts on algae production as the biggest primary factor. The continuous irradiance on HRABCP made the good algae-production($1403.97{\;}{\mu}g$ Chlorophyll-a/mg) and the good oxygen-production(5.8 mg $O_2/L$) and the good solid-liquid seperation. especially, DO concentration through the oxygen-production was enough to fishes' survival.

• Journal of Ecology and Environment
• /
• v.34 no.4
• /
• pp.411-423
• /
• 2011

This study was conducted to quantify soil $CO_2$ efflux using the continuous measurement method and to examine the applicability of an automatic continuous measurement system in a Korean deciduous broad-leaved forest. Soil respiration rate (Rs) was assessed through continuous measurements during the 2004-2005 full growing seasons using an automatic opening/closing chamber system in sections of a Gwangneung temperate deciduous forest, Korea. The study site was an old-growth natural mixed deciduous forest approximately 80 years old. For each full growth season, the annual Rs, which had a gap that was filled with data using an exponential function derived from soil temperature (Ts) at 5-cm depth, and Rs values collected in each season were 2,738.1 g $CO_2$ $m^{-2}y^{-1}$ in 2004 and 3,355.1 g $CO_2$ $m^{-2}y^{-1}$ in 2005. However, the diurnal variation in Rs showed stronger correlations with Ts (r = 0.91, P < 0.001 in 2004, r = 0.87, P < 0.001 in 2005) and air temperature (Ta) (r = 0.84, P < 0.001 in 2004, r = 0.79, P < 0.001 in 2005) than with deep Ts during the spring season. However, the temperature functions derived from the Ts at various depths of 0, -2, -5, -10, and -20 cm revealed that the correlation coefficient decreased with increasing soil depth in the spring season, whereas it increased in the summer. Rs showed a weak correlation with precipitation (r = 0.25, P < 0.01) and soil water content (r = 0.28, P < 0.05). Additionally, the diurnal change in Rs revealed a higher correlation with Ta than that of Ts. The $Q_{10}$ values from spring to winter were calculated from each season's dataset and were 3.2, 1.5, 7.4, and 2.7 in 2004 and 6.0, 3.1, 3.0, and 2.6 in 2005; thus, showing high fluctuation within each season. The applicability of an automatic continuous system was demonstrated for collecting a high resolution soil $CO_2$ efflux dataset under various environmental conditions.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.461-465
• /
• 2005

Characteristics of biological $CO_2$ fixation by Chlorella sp. HA-1 were investigated in a semi-continuous and series reactor system using an internally illuminated photobioreactor to overcome shortcomings of physicochemical technologies such as adsorption and membrane separation. High $CO_2$ fixation rate was achieved in the semi-continuous reactor system, in which the dilution ratios of the culture medium were controlled. The average $CO_2$ fixation rate was maintained almost constantly when the dilution ratio increased by 0.1 increment from the initial value of 0.5. The total removal efficiency of $CO_2$ was enhanced by employing a series reactor system. The average $CO_2$ fixation rate increased until 4.013 g $CO_2\;day^{-1}$ in a series operation of four reactors, compared to 0.986 g $CO_2\;day^{-1}$ in a batch operation mode. The total $CO_2$ fixation rate was proportional to the number of reactors used in the series reactor system. In the series reactor system of semi-continuous operation, a large amount of $CO_2$ was removed continuously for 30 days. These results showed that the present reactor systems are efficient and economically feasible for a biological $CO_2$ fixation.

• Korean Journal of Child Studies
• /
• v.26 no.6
• /
• pp.161-171
• /
• 2005

In Experiment 1, 4- and 5-year-olds were shown either continuous(i.e., pizza) or discontinuous Stimuli(i.e., biscuit) by the experimenter. After a proportion(e.g., 2/8, 4/8, or 6/8) was removed, children were asked to remove an equivalent proportion. Whereas 4-year-olds proportional reasoning was correct only when they shared the same stimulus with the experimenter, 5-year-olds reasoned correctly regardless whether or not they shared the stimulus with the experimenter. In Experiment 2, where the discontinuous stimulus was changed, 4-year-olds also made correct proportional reasoning even when their stimulus was different from the experimenter's. Contrary to other studies, quantity didn't affect children's proportional reasoning except the proportion 1/4, where problems with discontinuous quantity were solved more successfully than problems with continuous quantity.

• Journal of computational fluids engineering
• /
• v.4 no.2
• /
• pp.47-56
• /
• 1999

We developed a computer program to simulate the flow field in the presence of electro-magnetic fields. The steady, two-dimensional conservation equations for mass and momentum were solved simultaneously with Maxwell equations for electro-magnetic fields. Using this program, a numerical analysis was carried out to analyze the fluid flow in the continuous casting mold with electromagnetic brake. The effects of magnetic fields size, nozzle angle and EMBR yoke position on the flow fields in the continuous casting were investigated in the present study. The flow fields with EMBR were compared with those without EMBR. We also investigated the distribution of tracer concentration as a function of time in order to calculate their residence time in the mold with EMBR. By controlling the flow fields properly using EMBR, we can prevent the direct flow impaction on the wall which can give a damage on the mold surface and reduce surface defects of stainless steel sheet products.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.456-459
• /
• 2005

Continuous cooling transformation behaviors were studied fur low carbon HSLA steels containing three different level $(1\~3\;wt\%)$ of Ni addition. Thermo-mechanical processing (TMP) simulations to construct continuous cooling (CCT) diagram were conducted by using Gleeble system. As cooling rate increased, pearlite, granular bainite, acicular ferrite, bainitic ferrite and lath martensite were transformed from deformed austenite. Fully bainitic microstructure were developed at all cooling rate condition in high Ni containing steel due to hardenability increasing effects of Ni. Ni also influenced the transformation kinetics. At the slowest cooling rate of $0.3^{\circ}C/s$, transformation delayed with decreasing Ni contents because of the diffusion of substitutional alloy elements. However, cooling rate slightly increased to $1^{\circ}C/s$, transformation kinetics accelerated with decreasing Ni contents because nucleation of bainite was sluggish due to hardening of residual austenite.