• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.269-294
• /
• 2017

This study aimed to realize the creation of fuzzy stochastic damage to describe reliability more essentially with the analysis of harmony of damage conception, probability and fuzzy degree of membership in interval [0,1]. Two kinds of fuzzy behaviors of damage development were deduced. Fuzzy stochastic damage models were established based on the fuzzy memberships functional and equivalent normalization theory. Fuzzy stochastic damage finite element method was developed as the approach to reliability simulation. The three-dimensional fuzzy stochastic damage mechanical behaviors of Jianshan mine slope were analyzed and examined based on this approach. The comprehensive results, including the displacement, stress, damage and their stochastic characteristics, indicate consistently that the failure foci of Jianshan mine slope are the slope-cutting areas where, with the maximal failure probability 40%, the hazardous Domino effects will motivate the neighboring rock bodies' sliding activities.

• 한국정밀공학회지
• /
• 제8권3호
• /
• pp.27-43
• /
• 1991

연소 가공은 고품질 고정도를 필요로 하는 경우 매우 유효한 가공방법이지만 그 공정이 많은 Parameter에 의해 구성되기 때문에 동일한 조건에서도 정량적인 평가가 어려우므로 작업현장 에서는 과학적 원리와 공학적 지식 보다는 숙련자의 경험과 기능에 의존하고 있는 실정이다. 본 연구에서는 이와 같은 국면에 대처한 문제 해결을 위해 Computer가 인간사고에 근접 할 수 있도록 Fuzzy 이론과 Default 이론을 도입하고 전문가의 이론적 지식과 숙련자의 감각적 지식을 적극 수용 하여 연소용 Expert system (최적 가공 조건의 설정 System과 Trouble shooting system)을 개발하였다. 또한 연소 가공 Data의 불확실한 애매성을 효과적으로 이용 할 수 있도록 Fuzzy 가능성이론에 의해 가공 Datad을 회귀 분석하여 실가공 Data base에 축적시켜 재활용토록 설계하었으며 개발된 본 System 의 실행 결과 그 활용성이 높음을 입증하였다.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.59-65
• /
• 1996

A major problem in automation of turning operations is the difficulty in obtaining a sufficient and reliable chip control. Therefore it becomes desirable to find a method which can detect the chip form. Newly born chips in usual metal cutting radiate infrared rays. When such chips run out of cutting point quickly, the radiated energy from the zone around the tool is low compared with that of the case when long tangled chips are staying around the tool. The difference in chip pattern can be detected from the output of pyrometer. But, strictly speaking, only the output of pyrometer does not identify the chip form because that is the removal of chip. Therefore, in this paper, a method of the identification of chip form using output of pyrometer and fuzzy inference is developed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.164-169
• /
• 1998

This paper deals with condition monitoring for tool wear during tuning operation. To develop economic sensing and identification methods for turning processes, sound pressure measurement and digital signal processing technique are proposed. To identify noise sources of tool wear and reject background noise, noise rejection methodology is proposed. features to represent condition of tool wear are obtained through analysis using adaptive filter and FFT in time and frequency domain. By using fuzzy pattern recognition, we extract features, which are sensitive to condition of tool wear, from several features and make a decision on tool wear. The validity of the proposed system is condirmed through the large number of cutting tests in two cutting conditions.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1898-1909
• /
• 1993

In this paper, a convenient scheme for solving multi-objective optimization problems including fuzzy information in both objective functions and constraints is presented. At first, a multi-objective problem is converted into single objective problem based on the norm method, and a merbership function is constructed by selecting its type and providing the parameters defined by the norm method. Finally, this fuzzy programming problem is converted into an ordinary optimization problem which can be solved by usual nonlinear programming techniques. With this scheme, a designer can conveniently obtain pareto optimal solutions of a fuzzy system only by providing some parameters corresponding to the importance of the objectiv functions. Proposed scheme is simple and efficient in treating multi-objective fuzzy systems compared with and method by with membership function value is provided interactively. To show the validity of the scheme, a simple 3-bar truss example and optimal cutting problem are solved, and the results show that the scheme is very useful and easy to treat multi-objective fuzzy systems.

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.172-179
• /
• 1996

본 연구는 산림자원(山林資源)의 다목적(多目的) 이용(利用) 문제에 합리적으로 접근하기 위하여 퍼지 다목표(多目標) 선형계획법(線型計劃法)을 삼림경영계획에 응용하고자 시도되었다. 산림이 가지고 있는 두 가지 기능 즉, 목재생산기능(木材生産機能)과 공익기능(公益機熊)이 지역별로 적절히 발휘되면서 조화를 이룰때 산림자원의 다목적 이용문제가 해결될 수 있다. 여기에서는 공익기능 중에서 휴양기능(休養機能)이 발휘되고 있는 자연휴양림(自然休養林)을 대상으로 목재생산기능과 휴양기능이 합목적적(合目的的)으로 조합을 이룰 수 있는 모델을 개발하였다. 우리나라에서 최초로 조성된 유명산 자연휴양림 지역을 대상으로 자료를 수집하여 퍼지 다목표(多目標) 선형계획(線型計劃)모델을 구성하였다. 그리고 이 모델의 계산을 통해 얻어진 결과가 기존의 휴양림 경영계획서상의 자료와 비교 검토되었다. 이때 유명산 자연휴양림 면적 829ha를 대상으로 퍼지 다목표(多目標) 선형계획(線型計劃)모델을 적용한 결과 4분기(分期) 동안 수확경신(收穫更新) 가능한 면적이 410.8ha로 나타났고 이 때의 수확재적은 $57,904m^3$ 였으며, 이 휴양림(休養林)을 찾는 방문객수는 약 860만명 정도로 추정되었다. 퍼지 목표(多目標) 선형계획(線型計劃)모델에 의해서 목재생산계획(木材生産計劃)과 휴양계획(休養計劃)이 동시에 최적화(最適化) 될때의 최대구성함수(最大構成函數)값 ${\lambda}$는 0.29로 나타났다.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.214-222
• /
• 2003

Studies on the optimization of machining process can be divided into two different approaches: off-line feedrate scheduling and adaptive control. Each approach possesses its respective strong and weak points compared to each other. That is, each system can be complementary to the other. In this regard, a combined system, which is a feedrate control system fur cutting force optimization, was proposed in this paper to make the best of each approach. Experimental results show that the proposed system could overcome the weak points of the off-line feedrate scheduling system and the adaptive control system. In addition, from the figure, it can be confirmed that the off-line feedrate scheduling technique can improve the machining quality and can fulfill its function in the machine tool which has a adaptive controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1382-1385
• /
• 1993

In order to improve productivity, an intelligent control system is presented in the pater. In this intelligent control system, a feedforward neural network and a fuzzy feedback mechanism are adopted to achieve a constant milling force with an adjustable feedrate under a variety of cutting conditions in milling operations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.123.3-123
• /
• 2001

To recycle the uranium resources in the spent nuclear fuels, all the fuel rods are extracted from the spent fuel assemblies. The remaining components of the spent fuel assembly after extracting all the rods, so called a NFBC(Non-Fuel Bearing Components), should be compacted to minimize the waste volume. To this present, KAERI (Korea Atomic Research Institute) has developed he NFBC compactor by introducing a new concept of cutting and compaction, In this paper, to achieve he maximum compaction ration of the NFBC volume while reducing compactor size, an fuzzy controller, which determines the reference force of the compactor, is proposed with using he fuzzy-inference.

• 한국산업융합학회 논문집
• /
• 제4권2호
• /
• pp.127-132
• /
• 2001

In turning, the chip may be produced in the form of continuous chip or discontinuous chip. The continuous chips are dangerous to the operator and difficult to be handled at high speed machining. The signal of AE(Acoustic Emission) is found out to be related to cutting conditions, tool materials, test conditions and tool geometry in turning. In this study, the relationship between AE signal and chip form was experimentally investigated. The experimental results show that the types of chip form are possible to be classified from the AE signal using fuzzy logic.