• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.127-129
• /
• 2008

This paper describes a method of approximate reasoning for fuzzy control of servo system, based on decomposition of -level fuzzy sets. It is propose that logic circuits for fuzzy PI+PD are a body from fuzzy inference to defuzzificaion in cases where the output variable u directly is generated PWM. The effectiveness for robust and faster response of the fuzzy control scheme is verified for a variable parameter by comparison with a PID control and fuzzy control. A position control of DC servo system with a fuzzy logic controller successfully demonstrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.101.4-101
• /
• 2002

I. Introduction ▶The PID(Proportional-Integral-Derivative) controller is widely used in the industry it can be implemented easily for a typical second order plant. ▶The parameters of PID controller should be adapted complicatedly if a plant is various or the load is present. ▶For solving the problem, many control techniques have been developed. ▶A major method is a hybrid Fuzzy-PID controller. But, in case of using this method, we can not obtain characteristic of rapidly response and not achieved compensation on disturbance. ▶Therefore, we will use compensator fuzzy controller a front Hybrid type fuzzy-PID controller...

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.269-272
• /
• 1992

In this paper, an implementation approach of Fuzzy Position Controller for DC servo motor which requires the faster and more accurate dynamics is presented. The proposed Fuzzy position controller is consists of an adjustment routine obtaining optimal scale factors and a Fuzzy control routine inferencing optimal control signals, using 80286 microprocessor and DT 2801 board. Comparing to conventional PD controllers, the control performances such as reaching time, overshoot, disturbance adaptability and etc. are substantially improved.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.222-232
• /
• 1993

In this paper, we present two sets of fuzzy algorithms for the steam generator level control ; one for the high power operations where the flow error is available and the other for the low power operations where the flow error is not available. These are converted to a PID type controller for the high power case and to a quadratic function form of a controller for the low power case. These controllers are implemented on the Compact Nuclear Simulator at Korea Atomic Energy Research Institute and tested by a set of four simulation experiments for each. For both cases, the results show that the total variation of the level error and of the flow error are about 50% of those by the PI controllers with about one half of the control action. For the high power case, this is mainly due to the fact that a combination of two PD type controllers in the velocity algorithm form rather than a combination of two PI type controllers in the position algorithm form is used. For the low power case, the controller is essentially a PID type with a very small integral component where the average values for the derivative component input and for the controller output are used.