• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.110-117
• /
• 2014

In this study, the biological activity of water and ethanol extracts from Chrysanthemum incidicum Linne by ultrafine grinding for functional food source are examined. The content of phenolic compounds from Chrysanthemum incidicum Linne were the highest when extracted for 6 hr with 70% ethanol. The extraction yield of water and ethanol extracts were $7.12{\pm}1.61$ mg/g and $7.51{\pm}2.14$ mg/g, respectively. With ultrafine grinding, water and ethanol extracts were $8.63{\pm}1.15$ mg/g and $9.33{\pm}1.35$ mg/g, respectively. In determining anti-oxidative activity of Chrysanthemum incidicum Linne extracts, DPPH of normal grinding extracts was 83.52% and ultrafine grinding was 92.37%. In ABTS radical cation decolorization, normal grinding, fine grinding, and ultrafine grinding extracts were 90% or higher. In antioxidant protection factor (PF), water and ethanol extracts of ultrafine grinding showed relatively high anti-oxidative activities of each 1.82 PF and 2.16 PF, respectively. The TBARS value of ultrafine grinding extracts were lower than normal grinding and fine grinding extracts. The inhibition activity on xanthin oxidase of Chrysanthemum incidicum Linne extracts was 67.53% in ultrafine grinded water extracts and 83.45% in ultrafine grinded ethanol extracts. Inhibition on xanthin oxidase of ethanol extracts showed a higher inhibition effect than water extracts, and ultrafine grinding was higher than normal grinding. In angiotensin converting enzyme inhibition activity, ultrafine grinding water extract was 24% or higher, and ethanol extract was 34% or higher. The elastase inhibition activity of ultrafine grinding extract was 25.56%, which was higher than 20.34% of fine grinding extracts. Water extracts did not show hyaluronidase inhibition activity but ethanol extracts showed 35% of hyaluronidase inhibition activity. The determining expression inhibition of iNOS and COX-2 protein in macrophage by Chrysanthemum incidicum Linne extracts with a Western blot analysis, iNOS and COX-2 protein expression inhibition by Chrysanthemum incidicum Linne ethanol extracts were 40% and 15%, respectively at 100 ${\mu}g/mL$ concentration. The inhibitory patterns of iNOS and COX-2 protein expression was concentration dependent. The result suggests that Chrysanthemum incidicum Linne extracts by ultrafine grinding may be more useful than normal grinding as potential sources due to anti-oxidation, angiotensin converting enzyme and xanthine oxidase inhibition, anti-inflammation effect.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.500-508
• /
• 2011

This study was carried out to investigate the effects of jujube extracts on intestinal microflora, along with their antioxidant activities, according to extraction method. The antimicrobial activities of the extracts were measured using the agar diffusion method with a jujube extract concentration of 50 mg/mL. Neither the first nor second jujube extracts were inhibitory against the tested intestinal bacteria. However, water extracts of jujube significantly enhanced the growth of lactic acid bacteria, especially Bifidobacterium bifidum and Bifidobacterium adolescentis. Total phenol compounds and flavonoid compounds were higher in the 1st than in the 2nd water extracts. The EDA values of both water and ethanol extracts increased in proportion to the extract concentration. The 1st water extract showed the highest value among all the others, which was 85.60% at the concentration of 0.05 mg/mL. Furthermore, the 1st water extract showed stronger antioxidant activity than the other samples with an activity of 679.91 mg AA eq/g. These results support the potential use of jujube water extracts as a functional food component and a valuable resource for the development of nutraceutical foods, to increase the growth of Bifidobacterium spp. in the human intestine.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.559-592
• /
• 2012

In spite of the transitional changes in the shoe industry in Busan area, regular academic studies on the management plan to improve the practical competitiveness of footwear industry focused in the materials, bio-dynamics, components, and designs, etc. in the engineering viewpoint are very rare. Many reports of policies were published from late 190's to 2000's but they were limited to the identification of practical situations and the measures for strategic alternatives and were not developed to be the academic studies to improve the competitiveness in terms of management control. It is intended to seek for the measures to be reviewed as the alternatives to improve the self-competitiveness of footwear companies by approaching the problems limited to such specific area in the viewpoint of management control. The core of this study is to provide the alternative plans for expansion of the industrial foundation by seeking for the measures to improve competitiveness with application of knowledge management as an alternative for improvement of not transient but sustainable industrial competitiveness, in order to help the export of shoes from Busan area which has been rapidly increased since the Korea-USA FTA and Korea-EU FTA. In such viewpoint, in the study, a questionnaire survey was performed related with the issues of Busan's footwear industry and the plan to implement knowledge management was discussed for improvement of the competitiveness of footwear industry based on the result of such questionnaire survey. As most of studies and directions have been focused in functional shoes, designs, materials, and components, etc., which are related with the properties of human dynamics, as the alternatives for improvement of the footwear industry of Busan area and did not suggest the measures to make basic changes in the management of companies, the implementation of knowledge management was emphasized in order to seek for the direction of such plan. The purpose of this study is to suggest an alternative for construction of industrial eco-system for high added value by seeking for the probability of knowledge management for conversion of footwear industry into knowledge industry. In order to accomplish the effect of increased export as the result of FTA, current management method of footwear companies is limited and the effect of FTA should be maximized by improving the competitiveness with implementation of knowledge management methods. Settlement of such knowledge management will act as the momentum to improve the competitiveness of footwear companies and, in a long-term viewpoint, will be able to maximize the improvement of knowledge industry and creation of job opportunities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.125-135
• /
• 2009

Statement of problem: Loosening or fracture of the abutment screw is one of the common problems related to the dental implant. Generally, in order to make the screw joint stable, the preload generated by tightening torque needs to be increased within the elastic limit of the screw. However, additional tensile forces can produce the plastic deformation of abutment screw when functional loads are superimposed on preload stresses, and they can elicit loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum tightening torque that maximizes a fatigue life and simultaneously offer a reasonable degree of protection against loosening. Purpose: The purpose of this study was to present the influence of tightening torque on the implant-abutment screw joint stability with the 3 dimensional finite element analysis. Material and methods: In this study, the finite element model of the implant system with external butt joint connection was designed and verified by comparison with additional theoretical and experimental results. Four different amount of tightening torques(10, 20, 30 and 40 Ncm) and the external loading(250 N, $30^{\circ}$) were applied to the model, and the equivalent stress distributions and the gap distances were calculated according to each tightening torque and the result was analyzed. Results: Within the limitation of this study, the following results were drawn; 1) There was the proportional relation between the tightening torque and the preload. 2) In case of applying only the tightening torque, the maximum stress was found at the screw neck. 3) The maximum stress was also shown at the screw neck under the external loading condition. However in case of applying 10 Ncm tightening torque, it was found at the undersurface of the screw head. 4) The joint opening was observed under the external loading in case of applying 10 Ncm and 20 Ncm of tightening torque. 5) When the tightening torque was applied at 40 Ncm, under the external loading the maximum stress exceeded the allowable stress value of the titanium alloy. Conclusion: Implant abutment screw must have a proper tightening torque that will be able to maintain joint stability of fixture and abutment.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.995-1003
• /
• 2016

Ulmus pumila L. bark underwent distilled water extraction under three temperature condition ($4^{\circ}C$, room temperature, or $80^{\circ}C$) and two extraction times (1, or 5 min) in order to develop a functional beverage products. Changes in yield, pH, color, total phenolic (TP) content, tannin content and antioxidant activity of the aqueous extracts were evaluated for each extraction temperature and duration. Extraction conditions did not affect yield or pH value of the extracts; however CIE $b^*$ values were high in extracts prepared under high extraction temperature ($80^{\circ}C$) and long extraction duration (5 min) conditions. Both extraction temperature and duration affected the TP and tannin contents of the extracts; however, all extraction conditions resulted in ${\geq}450\;mg\;GAE/g$ TP content and ${\geq}80\;mg\;CE/g$ tannin content. All extracts exhibited ABTS and DPPH radical scavenging ability similar to that of vitamin C. Nitric oxide inhibition activity was lower in the 5 min duration sample than in the 1 min sample. The $4^{\circ}C$ extraction temperature produced an extract with the highest reducing power and hydrogen peroxide values. Extraction temperature also affected sensory evaluation results with the $80^{\circ}C$ extraction temperature producing significantly higher flavor, bitterness, and color score, than those obtained under $4^{\circ}C$ and room temperature extraction conditions.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.768-775
• /
• 2005

Lentinus edodes powder was added at 1-3%(w/w) to improve functional properties of jocheong. Content of crude protein, ash, crude lipids, total mineral, free sugar and reducing sugar increased with increasing amount of L. edodes powder, while viscosity and solid and carbohydrate contents decreased. Through amino acid analysis, 17 amino acids were identified and quantified, glutamic acid being the major amino acid. No significant differences were observed in fatty acid composition and pH between control and L. edodes powder-added jocheong. Addition of mushroom powder in jocheong decreased lightness, yellowness and redness in Hunter's color value. Sensor score of jucheong containing 1% of L. edodes powder was similar to that of control. Results showed jocheong containing less than 2% L. edodes powder gave highest scores in quality characteristics and sensory evaluation.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.441-446
• /
• 2012

We investigated the chemical properties and antioxidant activities of sword bean (SWB) and compared it to soybean (SB) and black soybean (seoritae, BSB). The value of vitamin C, vitamin A, crude fat, and crude protein in SWB was 25.5, 0.37 mg/kg, 1.2, and 25.6%, respectively. The crude fat content (1.2%) in SWB was very low in comparison with those of SB (16.5%) and BSB (16.1%). In 16 free amino acids investigated, the histidine content (9.2%) was high in SWB, followed by SB (3.0%) and BSB (2.9%). Total flavonoid content of SWB (493.2 mg/100 g) was significantly higher than those of SB (71.8 mg/100 g) and BSB (97.5 mg/100 g). Total polyphenol content of SWB (1,152.0 mg/100 g) was not significantly different from that of SB (1,165.7 mg/100 g) but lower than that of BSB (1,298.6 mg/100 g). DPPH radical scavenging activity ($SC_{50}$, 50% scavenging concentration) of SWB was 13.1 ${\mu}g/mL$, whereas that of positive control (${\alpha}$-tocopherol) was 8.3 ${\mu}g/mL$.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1628-1636
• /
• 2012

This study examined the antioxidant activity of the dark purple rice seeds from the rice line, MGI079, derived from insertional mutagenesis. The contents of polyphenolic compounds were 1.3 and 1.9-fold higher in the MGI079-2-1 and MGI079-2-6 rice lines than in the donor cultivar MGI079. Flavonoid contents were 6.4-fold higher in the MGI079-2-1 line. The MGI079-2-1 line showed a 24.4-fold higher activity in DPPH free radical scavenging compared to the MGI079 line. The anthocyanin content of the MGI079-2-6 line was more than 106.4-fold higher than the MGI079 line and 1.4-fold higher than the Heugnam line. Anthocyanin content in colored rice grains was negatively correlated with Hunter's L, a, and b values, with the correlation coefficients of $-5.64^{**}$, $5.21^{**}$ and -1.15, respectively. The grain length/width of a mutant of MGI079 segregated to a medium and bold type compared to the medium type of MGI079. However, the 1,000 grain weight was decreased to 13.6~19.6 g compared to 19.8 g for MGI079. Amylose content of the endosperm was 5.6~23.8% higher than in the MGI079 line. The grain of mutants of MGI079 was distinguished by its starch characteristics. The higher antioxidant activity of the MGI079-2-1 and MGI079-2-6 lines indicated functional characteristics associated with high-value resources, so future breeding should focus on the development of pigments in colored rice in new varieties.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.202-211
• /
• 2016

This study evaluated the changes of phytoestrogen contents and antioxidant activities of soybean-powder milk (SPM) prepared from yellow soybean during fermentation with Lactobacillus plantarum P1201. In consequence, the levels of total phenolic and isoflavone-aglycone contents, ABTS and DPPH radical-scavenging activities, and FRAP assay values increased, while isoflavone-glycoside contents decreased during fermentation. The highest levels of daidzein, glycitein, and genistein were present in the Daepung SPM at concentrations of 177.92, 20.64, and $106.14{\mu}g/g$, respectively after 60 h of fermentation. Moreover, Daepung SPM showed the highest DPPH radical-scavenging activity of 48.54%, an ABTS radical-scavenging activity of 99.25%, and a FRAP assay value of 0.84 at the end of fermentation. The fermented Daepung SPM possessed highest isoflavone aglycone contents and antioxidant activities, which can be utilized for the development of functional foods.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.463-469
• /
• 2008

During the last decade, monacolin-K biosynthesized by fermentation of red yeast rice (Monascus strains) was proved to have an efficient cholesterol lowering capability, leading to rapid increase in the market demand for the functional red yeast rice. In this study, the production medium composition and components were optimized on a shake flask scale for monacolin-K production by Monascus pilosus (KCCM 60160). The effect of three different soybean flours on the monacolin-K production were studied in order to replace the nitrogen sources of basic production medium (yeast extract, malt extract and beef extract). Among the several experiments, the production medium with dietary soybean flour to replace a half of yeast extract was very good for monacolin-K production. Plackett-Burman experimental design was used to determine the key factors which are critical to produce the biological products in the fermentation. According to the result of Plackett-Burman experimental design, a second order response surface design was applied using yeast extract, beef extract and $(NH_4)_2SO_4$ as factors. Applying this model, the optimum concentration of the three variables was obtained. The maximum monacolin-K production (369.6 mg/L) predicted by model agrees well with the experimental value (418 mg/L) obtained from the experimental verification at the optimal medium. The yield of monacolin-K was increased by 67% as compared to that obtained with basic production medium in shake flasks.