• Journal of the Korean Applied Science and Technology
• /
• 제25권4호
• /
• pp.525-532
• /
• 2008

To prepare a solution type acrylic pressure-sensitive adhesive, quarter polymers were synthesized from butyl acrylate(BA), 2-ethylhexylacrylate(2-EHA) as a base monomer, methyl methacrylate(MMA) as a comonomer, each of methacrylic acid(MAA), acrylic acid(AA) as a functional monomer. Acrylic solution type pressure-sensitive adhesives(PSA's) of isocyanate derivative crosslinking PSA's were prepared by crosslinking of BEMM, BEMA with toluene-2,4-diisocyanate. The structure of adhesive was identified by FT-IR. The viscosity was measured by using Brookfield DV-III and molecular weight was measured by using gel permeation chromatography. The physical properties of polyethylene film coated with BEMMT, BEMAT were measured as a function of the concentration. As the result, BEMMT(0.6, 0.8), BEMAT(0.6) showed peel adhesion of $160{\sim}180\;g_f$/25 mm width and shear adhesion of more than 24 hours, and tackiness of $4/32{\sim}6/32$ which was relevant to commercial usage.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.147-153
• /
• 2007

Hyperbranched polysiloxysilanes (HBPSs), with a variety of terminal functional groups (vinyl, epoxy, carboxyl and hydroxyl), were synthesized by the self-polymerization of an $AB_3$ type monomer of tris(dimethylvinylsiloxy) silane, with subsequent end-functionalizations, such as epoxidation and radical addition reaction, respectively. The ratio of the $\alpha-and$ $\beta-addition$ linkages in the HBPS polymerized by hydrosilylation of the $AB_3$ monomer was found to be approximately 1 to 3. The thermal stability and solubility were affected by the terminal functional groups.

• Polymer(Korea)
• /
• 제33권1호
• /
• pp.45-51
• /
• 2009

Water soluble adhesive was polymerized from butyl acrylate (BA), methyl methacrylate (MMA) and one of various functional monomers such as acrylic acid (AA), 2-hydroxylethyl methacrylate (2-HEMA), glycidyl methacrylic acid (GMA) and acrylamide (AAm). The amount of the functional monomers was 1$\sim$5 wt%/monomer. In order to improve the adhesive power, a substrate was treated using atmospheric flat plasma method. The adhesive power was improved by the addition of the functional monomers with an order of AA> 2-HEMA> GMA> AAm. The holding power of the adhesives, which is related with the thermal properties of the adhesives, increased with the amount of the functional monomers. The effectiveness in improving the holding power has an order of AA > AAm > GMA > 2-HEMA. By treating a substrate with atmospheric flat plasma method, the adhesives containing each of AA, 2-HEMA, GMA and AAm showed the increases of the final adhesion strength by 9.1, 9.4, 9.4, and 1.8%, respectively. In conclusion, the mechanical properties such as adhesive power and holding power could be controlled by introducing.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1098-1104
• /
• 2014

New electron deficient acceptor-acceptor-acceptor type of monomer unit composed of weak electron accepting benzimidazole and relatively strong electron accepting benzothiadiazole derivatives namely 4,7-bis(6-bromo-1-(2-ethylhexyl)-1H-benzo[d]imidazol-2-yl)benzo[c][1,2,5]thiadiazole (BBB) was synthesized. The Stille polycondensation of the newly synthesized BBB monomer with electron donating 2,6-bis(trimethyltin)-4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene (BDT) afforded donor-acceptor-acceptor-acceptor type of polymer namely 2,6-(4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene)-alt-4,7-bis(1-(2-ethylhexyl)-1H-benzo[d]imidazol-2-yl)benzo[c][1,2,5]thiadiazole (PBDTBBB). The opto-electrical studies revealed that the absorption band of PBDTBBB appeared in the range of 300 nm-525 nm and its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels were positioned at -5.18 eV and -2.84 eV, respectively. The power conversion efficiency (PCE) of the polymer solar cell (PSC) prepared from PBDTBBB:PC71BM (1:2 wt %) blend was 1.90%.

• Polymer(Korea)
• /
• 제32권2호
• /
• pp.138-142
• /
• 2008

Molecularly imprinting technology is an effective method to prepare a synthetic material with a high selectivity to a target molecule. In this study, a molecularly imprinted polymer (MIP) was synthesized via UV-polymerization using theophylline and UV-curable polyester-acrylate resin as a template molecule and a crosslinker, respectively. To elucidate the effects of functional monomer type on the performance of the MIP, each MIP was synthesized using mathacrylic acid, acrylic acid, and acryl amide as functional monomers. Each MIP showed higher rebinding capacity to theophylline than its corresponding non-imprinted polymer (NIP). The MIP synthesized using mathacrylic acid as a functional monomer showed the highest rebinding capacity to theophylline. The selectivity of the MIP was investigated using a solution with caffeine having a very similar structure to theophylline. The binding performance of the MIP to theophylline decreased when distilled water was used as a solvent, which has more polarity than chloroform.

• Polymer(Korea)
• /
• 제36권1호
• /
• pp.29-33
• /
• 2012

Solution type pressure sensitive acrylic adhesives were synthesized from 2-ethylhexyl acrylate (2-EHA) as a base monomer and acrylic acid as a functional monomer. The surface energy and basic physical properties of synthesized PSA (pressure sensitive adhesives) were investigated as a function of contents of acrylic acid and crosslinking agent. The structures of adhesive were identified by FTIR. Viscosities and molecular weights of PSA were measured by a Brookfield viscometer and GPC, respectively. Consequently, molecular weight and viscosity increased as the contents of acrylic acid increased up to 6 wt% and then decreased at higher contents. Surface energy increased as the contents of acrylic acid increased owing to the increase of COOH groups, which yielded the enhancement of polarity of PSA. On the other hands, their peel strengths were inversely proportional to molecular weight and showed tendencies of decreasing as the contents of acrylic acid and crosslinking agent increased.

• Journal of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.64-72
• /
• 1980

The synthesis of N-acrylylpyrrolidone has been carried out by the reaction of pyrrolidone and acrylyl chloride. The study on the copolymer of N-acrylylpyrrolidone and styrene is attempted.The copolymerization of N-acrylylpyrrolidone and styrene is carried out in benzene.Monomer reactivity ratio of N-acrylylpyrrolidone and styrene was calculated by Fineman and Ross equation. It is observed that the copolymer of N-acrylylpyrrolidone and styrene has random distributed acyl-lactam function on the vinyl polymer backbone.

• Proceedings of the Polymer Society of Korea Conference
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.97-98
• /
• 2006

After general introduction for hyperbranched polymers, hyperbranched polysiloxysilanes (HBPS) were introduced as new functional polymers. Vinyl terminated HBPS was synthesized starting from AB2 type monomer by hydrosilylation reaction. Vinyl group can be converted various functional groups such as carboxylic acid and alcohol. HBPS had strong interaction to inorganic surface. As an example of this phenomenon, silica gel bead for HPLC was modified with thermo sensitive polymers. The resulting bead was successfully applied to Green Chronatography.

• Proceedings of the Polymer Society of Korea Conference
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.174-174
• /
• 2006

By condensing two different functional monomers, highly fluorescent aromatic polymers were prepared to produce a conjugated- conjugated spacer-type copolymer or conjugated-non-conjugated spacer-type copolymer. As synthesized polymers were soluble in an organic solvent and showed significantly enhanced optical properties compared to its monomer. Variation in the monomer composition afforded polymers having multifunctionaility such as photochromic-fluorescent polymers. Transparent thin films of the polymer as a solid medium were prepared using spin coating method and fabricated as a photoswitch, which showed photo-induced conductivity switching properties depending on the core monomeric unit in the polymers.

• Journal of Adhesion and Interface
• /
• 제11권2호
• /
• pp.50-56
• /
• 2010

Polyethyleneterephthalate (PET) film is widely used in various industrial fields such as mobile phone, display pannel, notebook etc. Recently PET film attached on indium tin oxide (ITO) surface has a role of high pencil hardness, high refractive index etc. So we synthesized two types of multi-functional monomer which are epoxy modifed acrylate and unmodified acrylate type using recyclable resource like phloroglucinol, derived from trinitrotoluene. We studied the effect of multi-functional monomer's chemical structure on the various properties such as refractive index, optical transmittance, and pencil hardness. We characterized synthesized multi-functional monomer by qualitative analysis through H NMR. We observed that pencil hardness of 1,3,5-triepoxide benzene and 1,3,5-triacrylate benzene they have the range of 2~3 H at high UV dosage of 300 mW. Refractive index appeared the value of 1.54~1.57. Transmittance of all multi-functional monomers has more than 93%.