• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1098-1104
• /
• 2014

New electron deficient acceptor-acceptor-acceptor type of monomer unit composed of weak electron accepting benzimidazole and relatively strong electron accepting benzothiadiazole derivatives namely 4,7-bis(6-bromo-1-(2-ethylhexyl)-1H-benzo[d]imidazol-2-yl)benzo[c][1,2,5]thiadiazole (BBB) was synthesized. The Stille polycondensation of the newly synthesized BBB monomer with electron donating 2,6-bis(trimethyltin)-4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene (BDT) afforded donor-acceptor-acceptor-acceptor type of polymer namely 2,6-(4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene)-alt-4,7-bis(1-(2-ethylhexyl)-1H-benzo[d]imidazol-2-yl)benzo[c][1,2,5]thiadiazole (PBDTBBB). The opto-electrical studies revealed that the absorption band of PBDTBBB appeared in the range of 300 nm-525 nm and its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels were positioned at -5.18 eV and -2.84 eV, respectively. The power conversion efficiency (PCE) of the polymer solar cell (PSC) prepared from PBDTBBB:PC71BM (1:2 wt %) blend was 1.90%.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.29-33
• /
• 2012

Solution type pressure sensitive acrylic adhesives were synthesized from 2-ethylhexyl acrylate (2-EHA) as a base monomer and acrylic acid as a functional monomer. The surface energy and basic physical properties of synthesized PSA (pressure sensitive adhesives) were investigated as a function of contents of acrylic acid and crosslinking agent. The structures of adhesive were identified by FTIR. Viscosities and molecular weights of PSA were measured by a Brookfield viscometer and GPC, respectively. Consequently, molecular weight and viscosity increased as the contents of acrylic acid increased up to 6 wt% and then decreased at higher contents. Surface energy increased as the contents of acrylic acid increased owing to the increase of COOH groups, which yielded the enhancement of polarity of PSA. On the other hands, their peel strengths were inversely proportional to molecular weight and showed tendencies of decreasing as the contents of acrylic acid and crosslinking agent increased.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4130-4136
• /
• 2021

By polymerization of gadolinium methacrylate (Gd (MAA)₃), lead methacrylate (Pb(MAA)₂) and methyl methacrylate (MMA), Gd and Pb were chemically bonded into polymers. The X-ray shielding performance was evaluated by Monte Carlo simulation method, and the results showed that the more metal functional organic monomer, the better the shielding performance of terpolymers. When the X-ray energy is 65 keV, Gd (MAA)₃-containing polymers have better shielding performance than Pb(MAA)₂-containing polymers. Gd could compensate for the weak absorption region of Pb. Therefore, polymers containing both Gd and Pb enhanced shielding efficiency against X-ray in various low-energy ranges. For obtaining terpolymers with uniform monomer compositions, the relationship between the monomer composition of the terpolymers and the conversion level was optimized by calculating the reactivity ratios. The value of reactivity ratios of r (Gd (MAA)₃/Pb(MAA)₂), r (Pb(MAA)₂/Gd (MAA)₃), r (Gd (MAA)₃/MMA), r (MMA/Gd (MAA)₃), r (Pb(MAA)₂/MMA) and r (MMA/Pb(MAA)₂) was 0.483, 0.004, 0.338, 2.508, 0.255, 0.029. The terpolymers with uniform monomer composition could be obtained by controlling the monomer compositions or conversion levels. The results can provide new radiation protection materials and contribute to the improvement in nuclear safety.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.315-320
• /
• 2012

Ultra violet (UV) curable pressure sensitive adhesives (PSA) were prepared by controlling both the structure of acryl copolymer and the functionality and content of multi-functional monomers. Acryl copolymer worked as the base polymer for giving the tackiness. Multi-functional monomers were used to vary the crosslinked structure and the degree of crosslink. Acryl copolymer showed the reduced peel strength after UV curing by decreasing the content of 2-ethylhexyl acrylate in the monomer composition. Both the peel strength of PSA and the content of residue found on silicon wafer decreased after UV curing by increasing the functionality of multi-functional monomers. UV curable PSA containing 20 phr six-functional monomer showed the higher peel strength before UV curing and the lower peel strength and the least residue on silicon wafer after UV curing.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.89-92
• /
• 2007

See Full Text

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.138-142
• /
• 2008

Molecularly imprinting technology is an effective method to prepare a synthetic material with a high selectivity to a target molecule. In this study, a molecularly imprinted polymer (MIP) was synthesized via UV-polymerization using theophylline and UV-curable polyester-acrylate resin as a template molecule and a crosslinker, respectively. To elucidate the effects of functional monomer type on the performance of the MIP, each MIP was synthesized using mathacrylic acid, acrylic acid, and acryl amide as functional monomers. Each MIP showed higher rebinding capacity to theophylline than its corresponding non-imprinted polymer (NIP). The MIP synthesized using mathacrylic acid as a functional monomer showed the highest rebinding capacity to theophylline. The selectivity of the MIP was investigated using a solution with caffeine having a very similar structure to theophylline. The binding performance of the MIP to theophylline decreased when distilled water was used as a solvent, which has more polarity than chloroform.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.153-154
• /
• 2006

The development of metal catalysts that can polymerize or copolymerize "polar" $Ch_2=CHX$ monomers by insertion mechanisms would significantly expand the scope of metal-catalyzed polymerization and enable the synthesis of new materials with enhanced properties. We have studied the reactions of single-site olefin polymerization catalysts with vinyl chloride, acrylonitrile, and vinyl ethers, in order to probe monomer coordination trends, insertion rates and regioselectivity, and the structures and reactivity of metal alkyls that contain functional groups on the alpha and beta positions of the alkyl chain. These studies provide insights to the key issues that underlie the "polar monomer" problem. Copolymerization of olefins and selected vinyl ethers has been achieved.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.354-359
• /
• 2020

This research was conducted to analyze the compatibility of used monomers and produce the high functional contact lens material containing silicone monomers. Silicone monomer (Sil-OH), Trimethylsilylmethacrylate (TSMA) were used as additives for the basic combination of Polyhedral Oligomeric Silsesquioxane (POSS), methyl methacrylate (MMA) and methyl acrylate (MA). And also, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the fabricated lenses of all combinations are optically excellent and thus used monomers have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic lens material were varied in each case. Especially TSMA with POSS increases the oxygen permeability and Sil-OH with POSS increases the wettability by the addition of Sil-OH. These materials were considered to have compatibility each other, so it can be used in functional contact lens material.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.193-199
• /
• 2022

In this study, lenses are fabricated using various nanomaterials as additives to a silicone polymer made with an optimum mixing ratio and short polymerization time. In addition, PVP is added at a ratio of 1 % to investigate the physical properties according to the degree of dispersion, and the compatibility with hydrophobic silicone and the possibility of application as a functional lens material are confirmed. The main materials are SIU as a silicone monomer, DMA, a hydrophilic copolymer, EGDMA as a crosslinking agent, and 2H2M as a photoinitiator. Holmium (III) oxide, Europium (III) oxide, aluminum oxide, and PVP are used. When Holmium (III) oxide and Europium (III) oxide are added based on the Ref sample, the characteristics of the lens tend to be similar overall, and the aluminum oxide shows a tendency slightly different from the previous two oxides. This material can be used as a silicone lens material with various nano oxides and polyvinylpyrrolidone (PVP) acting as a dispersant.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.183-183
• /
• 1996