• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.86-91
• /
• 2015

The flash point is used to categorize inflammable liquids according to their relative flammability. Such a categorization is important for the safe handling, storage, and transportation of inflammable liquids. The flash point temperature of two binary liquid mixtures(n-octane+n-decane and n-octane+n-dodecane) has been measured for the entire concentration range using Seta-flash closed cup tester based on the ASTM D3278 method. The closed cup flash point temperature was estimated using the UNIFAC(Universal Functional Activity Coefficient) group contribution model. The experimentally derived flash point was also compared with the predicted flash point from the UNIFAC model. The UNIFAC model is able to estimate the flash point fairly well for n-octane+n-decane mixture and n-octane+n-dodecane mixture.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.319-325
• /
• 2004

An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of $CO_2$ for 15 min, the reactor was pressurized with liquid $CO_2$ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and $CO_2$ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.833-840
• /
• 1990

For the development of multi-functional materials which has water reducing power, air entraining power and waterproofing power as well as blending additive in cement mortar the coal ash was modified with asphalt-stearic acid or asphalt-boiled oil mixtures by mechanical treatment. And the physical properties of cement mortar blended with modified coal ashes were compared with those of the water-tightness-cement mortar and the ordinary-portland-cement mortar added with AE.water reducing agent. The mortar of coalash-blend-cement modified with asphalt-stearic mixture was increased acid about 20% in initial strengths and decreased about 20% in water absorption ratio than those of ordinary coalash-blend-cement. The mortar of coalash-blend-cement modified with asphalt-bolied oil mixture was similar to the cement mortar added with AE.water reducing agent in water reduction ratio, air entraining conents and the initial strengths, also was similar to the water-tightness-cement mortar in water absorption and water permeability ratios.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.177-181
• /
• 2009

Compositional gradient CrNx coatings were fabricated using arc ion plating in Ar/$N_2$ gaseous mixture by gradually increasing $N_2$ flux rate from 0 to 120 SCCM. The effect of negative substrate bias on the film microstructure and mechanical properties were systematically investigated with XRD, GDOES, and SEM. The results show that substrate bias has an important influence on film growth and microstructure of gradient CrNx coatings. The coatings mainly crystallized in the mixture of hexagonal $Cr_{2}N$ and fcc CrN phases. By increasing substrate bias, film microstructure evolved from an apparent columnar structure to an equiaxed one. With increasing substrate bias, deposition rate first increased, and then decreased. The maximum of deposition rate was 15 nm/min obtained at a bias of -50V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.177-179
• /
• 2000

Barrier rib for the plasma display panel (PDP) was made by photolithographic process utilizing photosensitive barrier rib paste. The barrier rib paste was prepared by first dissolving poly(MMA-co-MAA) binder polymer in butyl carbitol(BC) solvent at 15 wt% concentration. To this solution were added a mixture of functional monomers , Irgacure 651 photoinitiator, and barrier rib power and then the whole mixture was dispersed in the three roll mill for 2 hour. The effect of component and concentration of photosensitive barrier rib paste was studied. After optimization of the paste formulation and photolithographic process, barrier rib could be obtained with good resolution up to 110-120 ${\mu}m$ height and 80-90 ${\mu}m$ width.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.22-26
• /
• 2003

This short communication reports on the experiment which demonstrates that superhard nanostructured films with hardness of about 40 GPa and greater can be composed not only of two or more nanocrystalline and/or amorphous phases of different materials, as it is in the case of nanocomposite coatings, but also that can be formed by a mixture of small (<10 nm) nanocrystalline grains of the same material with different crystallographic orientation and/or lattice structures. This finding opens new possibilities to develop advanced nanostructured materials with enhanced physical and functional properties.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.770-776
• /
• 1998

Several ABCH type chiral calix[4]arenes were prepared from monoalkyl calix[4]arenes by treating with various acyl halide, followed by reacting with benzoyl chloride in pyridine. These asymmetrically substituted ABCH type calix[4]arenes are obtained as racemates mixture which are confirmed by the chiral shift reagent in 1H NMR spectra. The molecular and crystal structure of 5-nitro-26-allyloxy-25-benzoyloxy-28-isobutyryloxy-27-hydroxycalix[4]arene 8a has been determined by the X-ray diffraction method. Two independent enantiomeric molecules are crystallized in a 1: 1 racemate mixture. They are in the partial cone conformation in which the benzoyloxy phenyl group is down. There is a bifurcated intramolecular hydrogen bonding involving three functional groups in each molecule.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.3
• /
• pp.214-221
• /
• 1994

We present some results obtained from theoretical study on a non-symmetrical A/BC polymeric system including solvent which consists of two phases, a polymeric phase A on one side and a mixture of polymers B (as a compatibilizer) and C on the other in the presence of a solvent. By employing the functional integral techniques we derive the mean-field equations and solve them numerically to deduce the physical properties of the interface involving the polymers and solvent concentration profiles in the limit that molecular weights of all the polymers involved tend to infinity. The calculations are performed for typical values of the Flory interaction parameters and for the volume fraction of polymer B in the asymptotic phase and of solvent. In the polymers/solvent blend under consideration the interfacial adsorption of polymer B, the solvent concentration, and degrees of the specific interaction between the polymers are found to play important roles in modification of the interfacial properties.

• Analytical Science and Technology
• /
• v.34 no.1
• /
• pp.17-22
• /
• 2021

In this study, flame retardant mixtures of decabromodiphenylethane (DBDPE) and Sb2O3 were analyzed using Fourier transform infrared (FT-IR) spectroscopy. The experimentally obtained wavenumbers of DBDPE and Sb2O3 were 1321 and 949 cm-1, respectively, whereas those obtained by theoretical calculation were 1370 and 818 cm-1, respectively. Strong correlation was observed between the mixing molar ratios and observed peak area ratios, suggesting that FT-IR analysis can be used to obtain relative amounts of the individual components of flame retardant mixture.

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.523-531
• /
• 2022

The purpose of this study was to evaluate the effect of antioxidant and anti-adipogenic activities in ethanol extracts from herb mixture (Ephedra sinica, Atractylodes lance, Gypsum fibrosum, and Theobroma cacao). DPPH, ABTS⁺ radical and xanthine oxidase scavenging activities were measured for antioxidant activity. Extracts of the herb mixture had 75.0, 100.8, and 79.5% scavenging activities at 1,000 ㎍/ml concentration, respectively. We investigated the inhibition of adipogenesis and adipocyte differentiation with an extract of an herb mixture in 3T3-L1 preadipocytes. An extract from the herb mixture at concentrations between 0 and 50 ㎍/ml did not affect 3T3-L1 cell viability. Treatment with herb mixture extracts of 25, 50, and 75 ㎍/ml in 3T3-L1 preadipocytes inhibited lipid accumulation in a dose-dependent manner. As a result of a Western blot experiment, it was shown that the herb mixture inhibited the differentiation transcription factors, PPARγ and C/EBPa, by 44.2 and 77.6%, respectively, at a concentration of 75 ㎍/ml in MDI-induced differentiated 3T3-L1 cells. As a result of RT-PCR, the gene expression of C/EBPa, SREBP-1c, and PPARγ was significantly inhibited by 43.4%, 59.6%, and 55.3%, respectively, at the concentration of 75 ㎍/ml of the herb mixture compared with the MDI-treated group. In addition, the expression of fatty acid synthase (FAS), a fatty acid synthesis regulator, was suppressed. These results can be applied to develop a functional food for anti-obesity with a herb mixture.