• The Journal of Internal Korean Medicine
• /
• v.39 no.4
• /
• pp.637-644
• /
• 2018

Objectives: In this study, the tongue features of patients with functional dyspepsia (FD) were compared with those of healthy controls. Methods: This prospective, case-control study was conducted on patients with FD and controls recruited at a single center. After screening, the subjects were allocated to the patient or control groups (patients=42, controls=40). Tongue images were acquired using a computerized tongue image acquisition system (CTIS). An independent t-test was conducted to compare the measurements from patients and controls. Binary logistic regression was performed to determine significant differences between the two groups after adjusting for age and sex. Results: The CIE $a^*$ color value in the tongue coating area was significantly lower in the patients with FD than in the controls (p=0.001). The tongue coating ratios were also significantly higher in the FD group than in the control group (p=0.003). We found that the CIE $a^*$ color value in the tongue coating area and the tongue coating ratios were significant predictive factors in both groups, based on binary regression analysis (p=0.016, 0.044, respectively). Conclusions: This study found that FD was significantly associated with CIE $a^*$ color value in the tongue coating area and tongue coating ratios. We suggest that these factors could be used as objective indicators of FD.

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.101-106
• /
• 2008

The objective of the present study is to investigate the increase in the functional characteristics of a substrate by the formation of a thin coating layer. Thin coating layers of $Ti_5Si_3$ have high potential because $Ti_5Si_3$ exhibits high hardness. Shock induced reaction synthesis is an attractive fabrication technique to synthesize uniform coating layer by controlling the shock wave. Ti and Si powders to form $Ti_5Si_3$ using shock induced reaction synthesis, were mixed using high-energy ball mill into small scale. The positive effect of this technique is highly functional coating layer on the substrate due to ultra fine substructure, which improves the bonding strength. These materials are in great demand as heat resisting, structural and corrosion resistant materials. Thin $Ti_5Si_3$ coating layer was successfully recovered and showed high Vickers' hardness (Hv=1183). Characterization studies on microstructure revealed a fairly uniform distribution of powders with good interfacial integrity between the powders and the substrate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.63-64
• /
• 2001

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.771-776
• /
• 2017

The cover glass of mobile displays and photovoltaic cells needs a functional coating, such as an anti-reflection and self-cleaning coating. Numerous studies have been conducted on the engineering application of biomimetic functional surfaces, such as moth eye and lotus leaf Anti-reflection coantings of silica nanoparticles could enhance the light transmittance. $TiO_2$ photocatalyst coatings have been applied to self-cleaning functional films. In this study, transparent hydrophobic anti-reflective coatings consisting of thin layers of $SiO_2/TiO_2$ nanoparticles were fabricated on a slide glass substrate by the sol-gel process and dip-coating process. The dependence of the surface morphology of the functional coatings was investigated by the atomic force microscopy (AFM), contact angle measurement, and UV-visible spectroscopy. It was found that the coating of $TiO_2$ nanoparticles exhibited a high average transmittance comparable to that of the bare slide glass substrate in the visible light range. The bi-layered functional coating of 7 nm $SiO_2$/7nm $TiO_2$ nanoparticles exhibits a transparent hydrophobic surface with a contact angle of $110^{\circ}$ and an improvement of the average transmittance of 2.3% compared to the bare slide glass substrate in the visible light range.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.215-217
• /
• 2016

For the improvement of the anti-pollution properties of porcelain electrical insulators, in this study, we have applied the functional film to the surface of insulator. The functional films were coated on the ceramic substrates which components were like the porcelain electrical insulator. The coating material was applied to ceramic substrate by spray coating method and then the film was cured at around $300^{\circ}C$ for 10 minutes with different gas ambient, such as $O_2$, $N_2$, and only vacuum. We have measured the contact angle of the coated surface, and obtained the lowest angle ($8.9^{\circ}$) and a strong hydrophilic property at vacuum condition. The anti-pollution properties were measured, revealing that as the contact angle decreased, the anti-pollution properties improved. The mechanical hardness and adhesion were both excellent regardless of the annealing ambient.

• Particle and aerosol research
• /
• v.9 no.3
• /
• pp.127-132
• /
• 2013

Recently, Aerosol Deposition method has attracted considerable attention because of its advantages to produce ceramic coatings on various substrates at room temperature. This method is strongly dependent on the raw powder, which should have high mobility with carrier gas and moderate mechanical strength to be crushed onto the substrate. In this report, the effects of the ceramic granules' compressive strength on the ceramic coating formation are discussed. The ceramic granules were prepared by spray-drying method and heat treated at various temperatures. It was found that at the moderate mechanical strength of ceramic granules gave more effective film formation behavior during Aerosol Deposition method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.415-420
• /
• 2013

A method for coating rice with a novel substance, SHC [soybean hydrolysate with Cyclo Histidine-Proline (CHP)], was developed to produce functional rice for food production. The dip coating and spray coating method was tested to reduce the loss of functionality during the manufacturing of enriched rice. The dip coating method showed a very low absorption rate ($0.079min^{-1}$) of the functional substance compared to control ($0.150min^{-1}$), while the spray-coating method with protective coating materials [a methyl cellulose solution (l%, w/v) containing 5% (w/v) of the SHC] showed relatively adequate absorption characteristics. A light yellowish stain was observed in the rice samples processed by the spray-coating method (b value; surface1 0.69, flour 4.91) compared to raw rice (b value; surface 9.67, flour 4.86). The microscopic appearance of whole kernels and longitudinal sections revealed that cracks formed in all rice samples, regardless of the coating method. In conclusion, spray coating is a potential method for producing SHC-fortified rice with excellent physical characteristics.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.570-574
• /
• 2010

A diamond-like carbon (DLC) film deposited on a WC disk was investigated to improve disk wear resistance for injection molding of zirconia optical ferrule. The deposition of DLC films was performed using the filtered vacuum arc ion plating (FV-AIP) system with a graphite target. The coating processing was controlled with different deposition times and the other conditions for coating, such as input power, working pressure, substrate temperature, gas flow, and bias voltage, were fixed. The coating layers of DLC were characterized using FE-SEM, AFM, and Raman spectrometry; the mechanical properties were investigated with a scratch tester and a nano-indenter. The friction coefficient of the DLC coated on the WC was obtained using a pin-on-disk, according to the ASTM G163-99. The thickness of DLC films coated for 20 min. and 60 min. was about 750 nm and 300 nm, respectively. The surface roughness of DLC films coated for 60 min. was 5.9 nm. The Raman spectrum revealed that the G peak of DLC film was composed of $sp^3$ amorphous carbon bonds. The critical load (Lc) of DLC film obtained with the scratch tester was 14.6 N. The hardness and elastic modulus of DLC measured with the nano-indenter were 36.9 GPa and 585.5 GPa, respectively. The friction coefficient of DLC coated on WC decreased from 0.2 to 0.01. The wear property of DLC coated on WC was enhanced by a factor of 20.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.25-40
• /
• 1997

This research was carried out to investigated the effect of base paper and latex binder on printability and obtical properties of coated paper. Especially, it examined the effect of th pH of vase paper surface and functional groups of latices on the interactions between coating color components and on the structure of coated layer. It was found that the behavior of coating color containing amphoeric latex depends on the pH in the boundary region between coating color and base paper. Thus, the coating color formulated with amphoteric latex formed bulky coating layer by inducing stronger interaction between paper surface and coating components than the coating color with anionic latex. The coated paper with amphoteric latex showed better optical properties (i.e.gloss and optical) and printability (i.e. ink receptivity, wet ink receptivity, and ink set off) than the conventional anionic latex in the acidic and alkaline paper. However, dry pick strength of the coated paper was less decreased. This result indicated that amphoteric latex could also be applied practically to the alkaline paper.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.600-606
• /
• 2010

The objective of this study was to develop functional rice coated with yacon roots extracts and to evaluate the antioxidant properties and physiological activity of rice coated with yacon extract. The washed rice was coated by spraying yacon extract at 10, 20, 30, and $40^{\circ}Brix$ and dried at room temperature. The moisture contents, color changes, antioxidant properties as total polyphenolics and DPPH radical scavenging activity and instrumental texture property and sensory evaluation change in the yacon root extracts coated rice and uncoated cooked rice were observed during 3 days of storage. Increasing the coating concentration was associated with lower color values(L value) and moisture contents. Total phenolics and DPPH radical scavenging properties generally increased in the cooked rice coated with yacon root extract more than the control (non-coated rice). However, D-20($20^{\circ}Brix$ of the yacon root concentration) resulted in better textural properties and sensory overall acceptability in cooked rice on 0 and 3 storage days. It was concluded that the optimum coating ration of rice and added functional yacon rice were $20^{\circ}Brix$ and 7% respectively, in proportion to the total weight of raw rice.