• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.329-336
• /
• 2003

The box system that is composed only of reinforced concrete walls and slabs are adopted on many high-rise apartment buildings recently constructed in Korea. And the framed structure with shear wall core that can effectively resist horizontal forces is frequently adopted for the structural system for high-rise building structures. In these structures, a shear wall may have one or more openings for functional reasons. It is necessary to use subdivided finite elements for accurate analysis of the shear wall with openings. But it would take significant amount of computational time and memory if the entire building structure is subdivided into a finer mesh. An efficient analysis method that can be used regardless of the number, size and location of openings is proposed in this study. The analysis method uses super element, substructure, matrix condensation technique and fictitious beam technique. Three-dimensional analyses of the box system and the framed structure with shear wall core having various types of openings were peformed to verify the efficiency of the proposed method. It was confirmed that the proposed method have outstanding accuracy with drastically reduced time and computer memory from the analyses of example structures.

• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.903-908
• /
• 2001

The gene aeg-46.5, which is expressed under anaerobic condition, has putative triple -10 regions and four transcription start sites. The mRNA transcription level and its start point change depending on the aerobic/anaerobic growth condition. RNA polymerase and its regulatory proteins must choose which of three -10 region to use. The putative triple 10 region was mutated to make only one of them function with consensus -10 region sequence (TATAAT) and the other two as non-functional region. The results show that the second and third -10 regions are used for the aerobic/anaerobic expression. The third -10 region is responsible for the high aerobic to anaerobic switch ratio. This suggests that only the last two of the putative triple -10 region have functions on aeg-46.5 gene expression switch control. The phenotype of the mutated promoter was tested in the wild type cell and narL - cell. The results indicate that the control by NarL is independent from the selection of -10 region. The expression patterns on multi-copy plasmids and on single-copy chromosome were compared. These results show that the aerobic/anaerobic switch control of aeg-46.5 is through the choice of -10 region. The mechanism of choosing different -10 region remains to be seen.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.218-224
• /
• 2005

Surface modification of glutaraldehyde fixed bovine pericardium (GFBP) was success­fully carried out with hyaluronic acid (HA) derivatives. At first, HA was chemically modified with adipic dihydrazide (ADH) to introduce hydrazide functional group into the carboxyl group of HA backbone. Then, GFBP was surface modified by grafting HA-ADH to the free aldehyde groups on the tissue and the subsequent HA-ADH hydrogel coating. HA-ADH hydrogels could be prepared through selective crosslinking at low pH between hydrazide groups of HA-ADH and crosslinkers containing succinimmidyl moieties with minimized protein denaturation. When HA­ADH hydrogels were prepared at low pH of 4.8 in the presence of erythropoietin (EPO) as a model protein, EPO release was continued up to $85\%$ of total amount of loaded EPO for 4 days. To the contrary, only $30\%$ of EPO was released from HA-ADH hydrogels prepared at pH=7.4, which might be due to the denaturation of EPO during the crosslinking reaction. Because the carboxyl groups on the glucuronic acid residues are recognition sites for HA degradation by hyaluronidase, the HA-ADH hydrogels degraded more slowly than HA hydrogels prepared by the crosslinking reaction of divinyl sulfone with hydroxyl groups of HA. Following a two-week subcutaneous implantation in osteopontin-null mice, clinically significant levels of calcification were observed for the positive controls without any surface modification. However, the calcification of surface modified GFBP with HA-ADH and HA-ADH hydrogels was drastically reduced by more than $85\%$ of the positive controls. The anti-calcification effect of HA surface modification was also confirmed by microscopic analysis of explanted tissue after staining with Alizarin Red S for calcium, which followed the trend as observed with calcium quantification.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.62-69
• /
• 2006

This study was carried out to measure and analyze the storage condition, distribution route, and packaging method of four selected agricultural products(small tomato, cabbage, peach, and carrot) in the cold chain system. It was shown that dew-forming phenomenon by fruits and vegetables deteriorates the agricultural product quality and physical properties of corrugated fiberboard box during the cold chain system. The compressive strength deterioration in corrugated fiberboard boxes was much greater for single wall(SW) corrugated fiberboard containers than for double wall(DW) in low temperature-high humidity condition. To reduce the deterioration of box and dew-forming phenomenon, water-repellency treatment should be over $R_6$. However, water-resistant treatment of corrugated fiberboard containers would be effective under high relative humidity conditions more than 75% RH. It was suggested that functional corrugated fiberboard box packaging would be an optimum method to reduce the deterioration of agricultural products quality by. It was also achieved controlling the relative humidity and temperature during the storage and physical distribution process.

• 한국컴퓨터정보학회논문지
• /
• 제25권11호
• /
• pp.147-155
• /
• 2020

체계지원 소프트웨어는 함정 전투관리체계를 구성하는 소프트웨어 중의 하나로 모든 함정의 전투관리체계에 탑재되지만 기능 변경이 거의 일어나지 않는 특성을 가진다. 하지만, 이러한 특성에도 실제로는 신규함정 적용 시 장비 변경 등으로 인한 소프트웨어 수정이 불가피하게 이루어진다. 이러한 소프트웨어의 수정은 소프트웨어 신뢰성 시험 등의 작업을 초래하며, 개발 비용 증가의 핵심요인으로 작용한다. 본 논문에서는 기존 체계지원 소프트웨어의 구조를 분석하여 이를 보완할 수 있는 체계지원 표준화 아키텍처를 설계하였다. 휘처 모델(Feature Model)을 통해 체계지원 소프트웨어의 공통요소와 가변요소를 도출하고, 화이트 박스 재사용(White-Box Reuse)을 적용하여 소프트웨어 설계를 개선하였다. 또한, 기존 체계지원 소프트웨어와 개발 요소 및 신뢰성 시험 수행 시간을 비교하여 새로운 아키텍처의 효과성을 검증한 결과를 제시하였다.

• 보존과학회지
• /
• 제24권
• /
• pp.75-83
• /
• 2008

고문서 보관을 위해 사용되고 있는 오동나무상자의 항균활성을 측정하기 위해 오동나무로부터 방출된 휘발성 물질에 대한 항균활성과 휘발성 유기물질의 주성분을 정성분석 하였다. 항균활성은 상자 내부에 TSA 배지를 장착한 미생물 포집기를 설치하고 포집 후 배지에 성장한 미생물의 집락수를 관찰하였다. 그 결과 실외에서 포집한 배지의 집락수 85개 대비 14.82%가 감소한 72개 집락수가 관찰되었다. 포집된 공기질을 열탈착시스템 및 가스크로마토그래피/질량분석법을 통해 분석한 결과, 오동나무 상자 내 VOCs에서 limonene이 특징적으로 검출되었다. Eugenol과 anethole을 주성분으로 하는 천연 살생물제 I과 II를 상자 내에 첨가하여 훈증에 의한 항균활성을 측정한 결과, 약제 모두 실외와 오동나무 상자 내부에서 포집된 미생물 개체수 대비 각각 92.6%, 99.9% 이상 감소율을 보였다. 위의 결과로부터 사용된 오동나무 상자로부터 방출된 휘발성 유기화합물에 의한 항균활성 및 그 유효성분은 분석되지 않았으며, 생물피해로부터 고서적을 장기보관하기 위한 유물 보관함의 효율을 증진시키기 위해 천연 살생물제의 적용 가능성을 확인할 수 있었다.

• 재활치료과학
• /
• 제7권1호
• /
• pp.63-77
• /
• 2018

목적 : 본 연구는 기능적 전기 자극을 병행한 과제 지향적 훈련이 불완전 경수 손상 환자의 손 기능에 미치는 영향을 알아보고자 하였다. 연구방법 : 대상자는 불완전 경수 손상 진단을 받은 성인 3명으로, ABA 설계를 사용하였으며, 연구기간 동안 기초선(A1) 5회기, 중재기(B) 20회기, 재기초선(A2) 5회기로 총 30회기 실시하였다. 중재기(B) 동안 기능적 전기 자극을 병행한 과제 지향적 훈련이 제공되었고, 모든 회기에는 손 기능을 평가하기 위해 상자와 나무토막 검사(Box and Block Test), 떨어지는 막대 잡기(Grip the falling bar)와 먹기 흉내 내기(Simulated feeding)를 측정하였으며, 기초선(A1) 전, 재기초선(A2) 후로 Canadian Occupational Performance Measure(COPM), Jebsen-Taylor Hand Function Test(JTHFT)와 Wolf Motor Function Test(WMFT)를 실시하여 중재 효과를 살펴보았다. 결과 : 모든 대상자는 상자와 나무토막 검사(Box and Block Test), 떨어지는 막대 잡기(Grip the falling bar)와 먹기 흉내 내기(Simulated feeding)를 통해 기초선(A1)보다 중재기(B)에서 우세 손 기능이 향상되었고, 재기초선(A2)에서 그 효과가 유지되었다. 재기초선(A2) 후 COPM, JTHFT와 WMFT의 결과, 우세 손 기능의 향상과 과제 수행도와 만족도의 향상을 보였다. 결론 : 기능적 전기 자극을 병행한 과제 지향적 훈련은 경수 손상 환자의 손 기능뿐만 아니라, 대상자가 선택한 훈련 과제의 과제 수행도와 만족도 향상에 효과적이다.

• 한국융합학회논문지
• /
• 제12권12호
• /
• pp.323-330
• /
• 2021

본 연구에서는 10명의 건강한 성인을 대상으로 기능적 근적외선 분광법(fNIRS)을 이용하여 우세손과 비우세손에 따른 뇌 활성화도의 차이를 알아보고자 하였다. 우세손, 비우세손 총 2가지 조건에서 상자와 나무토막검사(BBT)를 실시하였다. 실험을 진행하는 동안 fNIRS을 이용하여 뇌 활성도를 측정하였으며, 실험이 종료된 후 nirsLAB v2019.04 소프트웨어를 사용하여 신호를 분석하였다. 그 결과 우세손을 사용한 경우 10명 중 6명이 우세손과 관련 있는 대뇌반구의 활성화를 보였고, 비우세손을 사용한 경우는 10명 중 3명만이 비우세손과 관련 있는 대뇌반구의 활성화를 보였다. 즉, 우세손, 비우세손 모두 우세손과 관련 있는 대뇌반구가 좀 더 활성화되었음을 확인하였다. 따라서 우세손을 알기 어려운 감각처리장애를 가진 아동들에게 fNIRS을 적용할 수 있는 기초적 자료로 사용될 수 있으리라 사료된다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권23호
• /
• pp.10475-10481
• /
• 2015

Forkhead-box (FOX) transcription factors comprise a large gene family that contains more than 50 members in man. Extensive studies have revealed that they not only have functions in control of growth and development, but also play important roles in different diseases, especially in cancer. However, biological functions for most of the members in the FOX family remain unknown. In the present study, the expression of 39 FOX genes in 48 kinds of cancer was mined from the Gene Expression Atlas database of European Bioinformatics Institute. The analysis results showed that some FOX genes demonstrate overlapping expression in various cancers, which suggests particular biological functions. The pleiotropic features of the FOX genes make them excellent candidates in efforts aimed to give medical treatment for cancers at the genetic level. The results also indicated that different FOX genes may have the synergy or antagonistics effects in the same cancers. The study provides clues for further functional analysis of FOX genes, especially for the pleiotropic biological functions and crosstalk of FOX genes in human cancers.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.102-110
• /
• 2009

Concurrent Engineering(CE) has presented new possibilities for successful product development by incorporating various product life-cycle functions from the earlier stage of design. In the product design, geometric representation is vital not only in its traditional role as a means of communicating design information but also in its role as a means of externalizing designer's thought process by visualizing the design product. During the last dozens of years, there has been extraordinary development of computer-aided tools intended to generate, present or communicate 3D models. However, there has not been comparable progress in the development of 3D-CAD systems intended to represent and manipulate a variety of product life-cycle information in a consistent manner. This paper proposes a novel concept, Minus Volume (MV), to incorporate various design information relevant to product lift-cycle functions. MV is a functional shape that is extracted from a design object within a bounding box. A prototype 3D-CAD system is implemented based on the MV concept and illustrated with the successful implementation of concurrent design and manufacturing.