• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.494-498
• /
• 2003

The transition from aromatics to heteroaromatics is very attractive since it provides an extremely large structural variety, the chemical functionality as well as the possibilities for electronic tuning of the fullerene properties. A synthesis of heterofullerenes in macroscopic quantities is unknown however the spectrometric detection of $C_{59}B$ has been reported. The electronic structures of $C_{(60-2x)}(BN)_x$ systems, isoelectronic with $C_{60}$ have been explored by Extended Hukel, AM1 and ab initio methods. The polyhedral assembly energy are 7.7 kcal greater than $C_{60}$ when one B-N unit is substituted with C-C unit. The assembly energies are getting bigger if more B-N unit is introduced. We focus on HOMO-LUMO energy gap and the stability effects in $C_{(60-2x)}(BN)_x$ with different compositions of $(BN)_x$ moiety. The bonding properties of the substituent atoms were investigated in detail.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.181-187
• /
• 2022

CdSe-Mn nanocomposites were synthesized using a microwave method with sodium sulfite (Na₂SO₃), selenium (Se), cadmium sulfate octahydrate (3CdSO₄·8H₂O), ammonia solution (NH₃·H₂O), and manganese (II) sulfate monohydrate (MnSO₄·H₂O). We obtained CdSe-Mn-C₆₀ nanocomposites by calcining CdSe-Mn nanocomposites and fullerene (C₆₀) in an electric furnace at 700 ℃ for 2 h. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to characterize the crystal structures, lattice vibrations, and surface morphologies of the products, respectively. The photocatalytic activities of the CdSe-Mn-C₆₀ nanocomposites were investigated based on the photocatalytic degradations of organic dyes such as BG, MB, MO, and RhB under ultraviolet (UV) irradiation at 254 nm. UV-visible spectrophotometry was used to confirm the degradation process.

• Journal of Photoscience
• /
• 제10권1호
• /
• pp.105-119
• /
• 2003

Fullerenes, $C_{60}$ and $C_{70}$, display interesting physicochemical properties in solutions, especially due to their unique chemical structures and their good electron accepting abilities. Solubility of fullerenes in different organic solvents and their unusual solvatochromic behavior, the ability of the fullerenes to form aggregates in solutions, and their electron transfer and charge transfer interactions with variety of electron donors, are the subjects of extensive research activities for more than one decade. Many research groups including ours have contributed substantially in the understanding of the solvatochromism, aggregation behavior, and the photoinduced electron transfer and charge transfer chemistry of fullerenes, in condensed phase. Present article is aimed to summarize the important results reported on the above aspects of fullerenes, subsequent to the earlier report from our group (D.K. Palit and J.P. Mittal, Full. Sci. & Tech. 3, 1995, 643-659).)., 643-659)..

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.29-30
• /
• 2003

Several forms of nanonetworked carbon materials were synthesized by high pressure and high temperature treatments of fullerene C$\_$60/ and single-walled carbon nanotube bundles. Structural properties (e.g. thermal expansion coefficients and compressibilities) of the synthesized materials were investigated by XRD measurements using synchrotron X-ray. Their formation mechanisms are also discussed.

• 한국분말재료학회지
• /
• 제11권4호
• /
• pp.279-287
• /
• 2004

탄소재료는 결정구조에 따라 카본블랙(carbon black), 그라파이트(graphite), 탄소섬유(carbon fiber) 등 다양한 형태가 있으며 그 응용 또한 광범위하다. 이는 탄소재료가 화학적으로 매우 안정하고, 열 및 전기전도성이 우수하며, 기계적인 특성면에서도 고강도, 고탄성율을 가지고 있어서 구조적으로 안정하기 때문이다. 특히 $C_{60}$(fullerene)와 탄소나노튜브(carbon naotube : CNT)등 근래 새로이 발견된 탄소물질들$^{1.2)}$ 은 그 독특한 결정구조와 성질로 인해 다양한 분야의 응용이 예상된다.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.151-162
• /
• 1998

Infrared absorption spectra of 9 bulk samples and 3 acid residues of meteorites were obtained in the mid-infrared region ($4000~400cm^{-1}$). From the know composition of meteorites studied, the possible absorption modes were investigated. Most bands of bulk samples occur in the region below $1200cm^{-1}$ and they are due to metallic oxides and silicates. The spectra of each group can be distinguished by its own characteristic bands. Acid residues show very distinct features from their bulk samples, and absorp-tion bands due to organic compounds are not evident in their spectra. Quantiative analyses for two carbonaceous (Allende CV3 and Murchison CM2) and one ordinary (Carraweena L3.9) chondrites were performed for the presence of fullerene ($C_{60}$) in the meteorites. We calculated the concentration of $C_{60}$ in the acid residues by curve-fitting the spectra with Gaussian functions. The upper limit of $C_{60}$ concentration in these meteorites appears to be less than an order of a few hundred ppm.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.351-356
• /
• 2014

The electronic structure at organic-organic interface gives essential information on device performance such as charge transport and mobility. Especially, the molecular orientation of organic material can affect the electronic structure at interface and ultimately the device performance in organic photovoltaics. The molecular orientation is examined by the change in ionization potential (IP) for metal phthalocyanines (MPc, M=Zn, Cu)/fullerene ($C_{60}$) interfaces on ITO by adding the CuI templating layer through ultraviolet photoelectron spectroscopy measurement. On CuPc/$C_{60}$ bilayer, the addition of CuI templating layer represents the noticeable change in IP, while it hardly affects the electronic structure of ZnPc/$C_{60}$ bilayer. The CuPc molecules on CuI represent relatively lying down orientation with intermolecular ${\pi}-{\pi}$ overlap being aligned in vertical direction. Consequently, in organic photovoltaics consisting of CuPc and $C_{60}$ as donor and acceptor, respectively, the carrier transport along the direction is enhanced by the insertion of CuI templaing layer. In addition, optical absorption in CuPc molecules is increased due to aligned transition matrix elements. Overall the lying down orientation of CuPc on CuI will improve photovoltaic efficiency.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.457-460
• /
• 2010

The geometrical structures and energetics of positively doubly charged fullerene dimer $(C_{60})_2{^{2+}}$ conformers were studied using semiempirical PM3 and MNDO, Hartree-Fock (HF), and Hybrid B3LYP density functional methods. The shape of the HOMO-LUMO for the three conformers was also analyzed. The gauche conformer was the most stable of the three conformers. The anti conformer was more stable than the syn conformer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.261.1-261.1
• /
• 2013

Well-aligned nanowire arrays can be used as building blocks for nanoscale device. Recently, we reported that well-aligned single-crystal organic nanowires has been created by using a direct printing method which is named liquid-bridge mediated nanotransfer molding (LB-nTM). Moreover, multi-layering nanostructures can be fabricated by repeating this printing process. As a result, it is possible to make simple and basic concept of heterojunction devices such as crossed nanowire devices. We fabricated crossed single-crystal organic nanowires nanojunction devices from 6,13-bis (triisopropylsilylethynyl) pentacene (TIPS-PEN) and fullerene (C60) single-crystal nanowires using by direct printing method in solution process. Crossed TIPSPEN/ C60 single-crystal nanowires diode has rectifying behavior with on/off ratios of ~13. In addition, the device shows photodiode characteristics as well as rectification. Our study represent methodology of heterojunction devices using single-crystal nanowires, thereby provide a new direction of future nanoelectronics.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.124-127
• /
• 2005

It has been a long time since organic solar cells were expected as a low-cost energy-conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar cell devices based on zinc-phthalocyanine(ZnPc) as donor(D) and fullerene$(C_60)$ as electron acceptor(A) with doped charge transport layers, and BCP and $Alq_3$ as an exciton blocking layer(EBL). We have measured the photovoltaic characteristics of the solar cell devices using the Xe lamp as a light source. We were use of $Alq_3$ layer leads to external power conversion efficiency was $2.65\%$ at illumination intensity $100\;mW/cm^2$. Also we confirmed the optimum thickness ratio of the DA hetero-junction is about 1:2.