• ETRI Journal
• /
• 제43권6호
• /
• pp.957-965
• /
• 2021

A miniaturized wideband band-pass filter with a 3-dB fractional bandwidth of 109.3% (1.53 GHz to 5.22 GHz), high out-of-band attenuation greater than 25 dB, and wide upper stopband up to 14 GHz is proposed. The design consists of a dual-composite right/left handed resonator, embedded open-circuited stub, and a pair of quarter-wavelength short-circuited stubs. These elements are coupled in the near distance to form a miniature filter with a compact occupied area of 0.21 λ_g×0.19 λ_g (≈ 0.013 cm²). The optimized filter has multitransmission poles in the passband, substantially improving the return loss and insertion loss characteristics. The behavior of the passband and stopband is verified against the results of a lumped element model and matrix analysis with a full-wave moment-based analysis and actual measurements. The results of this verification and a comparison with the performance of filters in other references indicate that the proposed filter is very efficient and applicable to compact microwave systems.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.650-654
• /
• 2007

유도전동기는 전기차량의 주요 동력원으로 광범위하게 사용되고 있으며, 유도전동기의 속도제어에 펄스변조 방식을 이용한 인버터의 사용이 증가하고 있다. 본 논문에서는 유도전동기의 인버터 구동시 발생하는 과도전압에 대해 연구하였다. 전원 케이블의 길이에 따른 과도전압의 크기를 측정하였으며, 시간변화율과 운전주파수에 의한 영향을 분석하였다. 실험결과, 케이블의 길이가 길어짐에 따라 과도전압의 최대값이 증가하였으며 50m 케이블에서 과도전압의 크기는 최대 3.3PU까지 측정되었다. 이러한 현상은 진행파의 반사와 투과에 의해 발생하며, 유도전동기의 인버터 구동시 케이블의 길이에 따른 과도전압의 영향을 고려하여 유도전동기의 절연을 설계해야 할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• 대한조선학회지
• /
• 제2권1호
• /
• pp.9-14
• /
• 1965

Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.169-181
• /
• 2016

This work presents a new method for enhancing the performance of a dual band Planer Inverted-F Antenna (PIFA) and its lumped equivalent circuit formulation. The performance of a PIFA in terms of return loss, bandwidth, gain, and efficiency is improved with the addition of the proposed open stub in the radiating element of the PIFA without disturbing the operating resonance frequencies of the antenna. In specific cases, various simulated and fabricated PIFA models illustrate that the return loss, bandwidth, gain, and efficiency values of antennas with longer optimum open stub lengths can be enhanced up to 4.6 dB, 17%, 1.8 dBi, and 12.4% respectively, when compared with models that do not have open stubs. The proposed open stub is small and does not interfere with the surrounding active modules; therefore, this method is extremely attractive from a practical implementation point of view. The second presented work is a simple procedure for the development of a lumped equivalent circuit model of a dual band PIFA using the rational approximation of its frequency domain response. In this method, the PIFA's measured frequency response is approximated to a rational function using a vector fitting technique and then electrical circuit parameters are extracted from it. The measured results show good agreement with the electrical circuit results. A correlation study between circuit elements and physical open stub lengths in various antenna models is also discussed in detail; this information could be useful for the enhancement of the performance of a PIFA as well as for its systematic design. The computed radiated power obtained using the electrical model is in agreement with the radiated power results obtained through the full wave electromagnetic simulations of the antenna models. The presented approach offers the advantage of saving computation time for full wave EM simulations. In addition, the electrical circuit depicting almost perfect characteristics for return loss and radiated power can be shared with antenna users without sharing the actual antenna structure in cases involving confidentiality limitations.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.36-44
• /
• 1999

본 논문에서는 Ka-밴드 위성중계기용 듀플렉서의 설계를 위해 모드정합법에 의해 산란행렬을 계산하여 설계한 필터의 전달특성을 분석하고, 설계 방법의 타당성 여부 검증을 위해 대칭적 유도성 아이리스 구조와 전계면 금속삽입 구조로 설계된 2개의 대역통과 필터를 자계면 T-접합에 의한 합성방법으로 Ka-밴드 위성 중계기용 듀플렉서를 설계, 제작하였다. 제작된 듀플렉서는 위성체에서 송${\cdot}$수신 필터의 개별 사용에 따른 크기 및 두께의 증가를 효과적으로 감소시킬 수 있으며, 송신필터의 경우 아이리스를 도파관 자계면 외벽으로 돌출시키는 구조로 설계함으로써 필터 자체가 방열판 구실을 하여 고전력 전송에 따른 필터의 특성 변화를 최소화하였다. 또한 대부분의 도파관 필터에서 동작특성을 보정하기 위해 사용되는 미세 보정 나사의 사용을 배제함으로써 제작의 단순화와 위성중계기용으로서의 내구성과 신뢰도를 향상시켰다. 제작된 ,Ka-밴드 위성중계기용 듀플렉서는 2개의 필터(Rx : 30.485 ${\pm}$ 0.4 GHz, Tx : 20.755 ${\pm}$ 0.4 GHz) 모두 통과대역에서 1.2dB 미만의 삽입손실(insertion loss)과 15 dB 보다 좋은 반사손실(return loss) 특성을 얻었고, 송${\cdot}$수신 필터간 65 dB 이상의 분리도(isolation)를 나타내었다.

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.879-886
• /
• 2008

본 논문에서는 저전압 차동 신호(Low-Voltage Differential Signaling, LVDS) 전송방식의 응용을 위한 차동 전송 접속 경로의 분석 및 설계 최적화 방법을 제안한다. 차동 전송 경로 및 저전압 스윙 방법의 발전으로 인해 LVDS 방식은 데이터 통신 분야, 고해상도 디스플레이 분야, 평판 디스플레이 분야에서 매우 적은 소비전력, 개선된 잡음 특성 및 고속 데이터 전송률을 제공한다. 본 논문은 차동 유연성 인쇄회로 보드(flexible printed circuit board, FPCB) 전송선에서 선폭, 선두께 및 선 간격과 같은 전송선 설계 변수들의 최적화 기법을 이용하여 직렬 접속된 전송선에서 발생하는 임피던스 부정합과 신호왜곡을 감소시키기 위해 개선 모델과 새로이 개발된 수식을 제안한다. 이러한 차동 FPCB 전송선의 고주파 특성을 평가하기 위해 주파수 영역에서 전파(full-wave) 전자기 시뮬레이션, 시간영역 시뮬레이션 및 S 파라미터 시뮬레이션을 각각 수행하였다. $17.5{\mu}m$과 $35{\mu}m$의 전송선의 경우, 전극 폭에서의 약 10% 변화가 차동 임피던스에서의 약 6%와 5.6%의 변화를 각각 보였으나, 전송선 간 간격은 차동 및 특성 임피던스에서의 영향을 주지 않음을 확인하였다. 또한 전송선 간격이 증가할수록 상호 인덕턴스 및 커패시턴스가 감소하기 때문에 누화 잡음을 감소시키기 위해 신호 전송선간의 간격을 $180{\mu}m$ 이상 유지 해야함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.60-71
• /
• 2019

Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.

• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.284-290
• /
• 2016

최근 과학의 발전으로 인해 여러 장소에서 전자기기의 활용도가 높아졌기 때문에 예기치 못한 전자기파로 인한 오작동과 하드웨어와 소프트웨어의 치명적인 손상을 확인할 수 있는 안전 기술들이 요구되었다. 기존의 전자 제품뿐만 아니라 소형화 전자기기들이 복잡도가 높은 대형구조물 안에 비치가 되면서 그에 대한 전자파 영향을 맥스웰 방정식(Maxwell Equation)으로 모두 해석하기에는 여러 한계점을 갖고 있다. 본 논문에서는 대형 구조물에서의 복잡한 전자파 해석을 위해 확률론에 바탕을 둔 PWB(PoWer Balance) Method와 위상학적 모델링을 적용하여 내부의 전파 영향을 해석하고자 한다.

• 한국콘텐츠학회논문지
• /
• 제13권9호
• /
• pp.164-177
• /
• 2013

본고의 목적은 사회참여가 노인 자살생각에 영향을 미치는 경로에서, 사회적 지지와 자기효능감의 매개효과를 확인하는 것에 있다. 이에 본고는 서울시복지패널 2차 년도(2010년) 자료에 기재된 총 6,304케이스 중, 65세 이상 1,429명을 분석대상으로 추출하여 연구에 적용하였다. 분석방법으로는 AMOS 18.0의 구조방정식 모형을 사용하였으며, 매개효과의 유의수준을 확인하기 위하여 sobel 검증방식이 이용되었다. 분석결과, 측정모형과 구조모형의 적합도가 양호하고 경로계수가 유의하여 본 모형이 분석에 적절한 모형임이 확인되었다. 구체적으로 매개변수가 통제되면 직접효과가 상실되는 완전매개모형이 성립되었다. 그리고 sobel 검증방식을 응용한 결과, 사회적 지지와 자기효능감의 매개효과 유의수준이 확증되었다. 이에 본고는 제시된 결과를 기반으로, 2차 집단과 개인 간 관계의 중요성과 개입방안을 추론하였다.