• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권3호
• /
• pp.252-261
• /
• 2016

A spar-type floating substructure that is being widely used for offshore wind power generation is vulnerable to resonance in the heave direction because of its small water plane area. For this reason, the stable dynamic response of this floating structure should be ensured by accurately identifying the resonance characteristics. The purpose of this study is to analyze the characteristics of the combination resonance between the excitation frequency of a regular wave and natural frequencies of the floating substructure. First, the nonlinear equations of motion with two degrees of freedom are derived by assuming that the floating substructure is a rigid body, where the heaving motion and pitching motions are coupled. Moreover, to identify the characteristics of the combination resonance, the nonlinear term in the nonlinear equations is approximated up to the second order using the Taylor series expansion. Furthermore, the validity of the approximate model is confirmed through a comparison with the results of a numerical analysis which is made by applying the commercial software ANSYS AQWA to the full model. The result indicates that the combination resonance occurs at the frequencies of ${\omega}{\pm}{\omega}_5$ and $2{\omega}_{n5}$ between the excitation frequency (${\omega}$) of a regular wave and the natural frequency of the pitching motion (${\omega}_{n5}$) of the floating substructure.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.448-454
• /
• 1999

This paper describes a new dc-ac inverter system which for achieving sinusoidal ac waveform makes use of parallel loaded high frequency resonant inverter consisting of full bridge. Each one of the pair of switches in the inverter is driven to synchronous output frequency and the other is driven to PWM signal with resonant frequency proportional to magnitude of sine wave. A forced discontinuous conduction mode is used to realize the quasi-sinusoidal pulse in each switching period. Therefore the inverter generates sinusoidal modulated output voltage including carrier frequency that is resonant frequency. Carrier frequency components of modulated output voltage is filtered by low pass filter. Since current through switches is always zero at its turn-on in the proposed inverter, low stress and low switching loss is achieved. Operating characteristics of the proposed system is analyzed in per unit system using computer simulation. The output voltage of if includes low harmonics and it is almost close to sine wave. Also, the theoretical analysis is proved through the experimental test.

• Ocean Systems Engineering
• /
• 제9권2호
• /
• pp.111-133
• /
• 2019

Flow through a scaled horizontal axis marine current turbine was numerically simulated after validation and the turbine design was optimized. The computational fluid dynamics (CFD) code Ansys-CFX 16.1 for numerical modeling, an in-house blade element momentum (BEM) code for analytical modeling and an in-house surrogate-based optimization (SBO) code were used to find an optimal turbine design. The blade-pitch angle (${\theta}$) and the number of rotor blades (NR) were taken as design variables. A single objective optimization approach was utilized in the present work. The defined objective function was the turbine's power coefficient ($C_P$). A $3{\times}3$ full-factorial sampling technique was used to define the sample space. This sampling technique gave different turbine designs, which were further evaluated for the objective function by solving the Reynolds-Averaged Navier-Stokes equations (RANS). Finally, the SBO technique with search algorithm produced an optimal design. It is found that the optimal design has improved the objective function by 26.5%. This article presents the solution approach, analysis of the turbine flow field and the predictability of various surrogate based techniques.

• 한국지진공학회논문집
• /
• 제9권4호
• /
• pp.67-74
• /
• 2005

이 논문에서는 포화된 2상 지반의 동적해석에서 원역을 모형화하기 위한 새로운 무한요소를 제안하였다. 무한요소법은 무한영역 또는 반무한영역을 모형화해야 하는 공학문제에 효과적으로 적용되어 왔다. 그러나 현재까지 개발된 2상지반의 동적해석을 위한 무한요소는 형상함수에 사용될 수 있는 파동성문이 2개(Pl파와 P2파)로 한정되어 있다. 이 논문에서는 이와 같은 제한을 없애고 임의 개수의 파동성분을 고려할 수 있도록 하는 정식화 과정을 제안하였다. 구조물을 포함하는 근역은 유한요소로 나타내며 원역은 평행층상 반무한 지반으로 가정하였다. 제안된 무한요소의 타당성은 1차원 및 2차원 파동전달문제를 해석하고 이를 이론해 및 정밀수지해석 해와 비교하여 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.68-76
• /
• 2021

적재설비는 지진으로 인한 막대한 손실이 발생한 사례가 있으나, 현재까지 관련 연구 및 규정이 구조요소에 비하여 상대적으로 미비한 대표적인 비구조 요소이다. 본 연구에서는 적재설비의 기둥-기초 연결부의 고정조건에 따른 외력으로 인한 적재설비의 거동특성을 실험적으로 분석하고자 하였다. 일반적으로 적재설비의 기둥-기초 연결부는 설치 기준 및 규정 없이 사용자의 편의에 따라 설치되고 있다. 이러한 이유에서 본 연구에서는 대표적인 4가지 적재설비의 기둥-기초 연결부 조건을 적용한 4가지 full-scale 적재설비를 대상으로 거동특성 분석 실험을 수행하였다. 거동특성 분석 실험은 El-Centro 지진파로 진동대를 2방향 동시 가진하며 수행하였으며, 지진하중의 크기에 따른 거동특성을 확인하기 위하여 지진파의 50% ~ 150% 까지 각 실험 별 50%씩 증가하며 진행하였다. 추가로 각 적재설비의 기초 고정조건별 고유진동수를 확인하기 위하여 공진 탐색실험을 진행하였다. 실험을 통하여 획득한 데이터 중 최상층의 변위와 실험 후 발생한 영구 변위를 각 조건별로 비교하여 적재설비의 기둥-기초 고정조건에 따른 거동특성을 분석하였다. 그 결과, 적재설비는 기초 조건의 변화에 따른 고유진동수의 변화가 미소하였으며, 입력 하중의 고유진동수의 영향보다는 적재설비 기초 고정조건의 변화로 인한 복원력 차이로 인한 영향으로 인하여 거동특성이 변화되는 것을 확인하였다.

• 한방재활의학과학회지
• /
• 제31권2호
• /
• pp.41-48
• /
• 2021

Objectives To determine the evidence of effectiveness and safety of extracorporeal shock wave therapy (ESWT) with meridian and acupoint theory for knee osteoarthritis. Methods By March 3, 2021, five foreign electronic databases and six Korean medical electronic databases were reviewed with the key words 'extracorporeal shock wave' and '(acupoint OR acupuncture point)'. This key words was set up to increase the sensitivity of the search. After the search, knee osteoarthritis study was selected based on the title and abstract and then included after full-texts were read. Results Five randomized controlled trials were eligible in our inclusion criteria. The meta-analysis of three studies showed positive results for the using ESWT with meridian and acupoint theory for knee osteoarthritis compared with the control group on efficancy rate, visual analog scale and lysholm knee score. but there remains a conundrum regarding the safety of ESWT in the treatment of knee osteoarthritis. Conclusions Most of studies showed ESWT with meridian and acupoint theory were statistically effective to knee osteoarthritis. However there are limitations that the number of selected studies was small, risk of bias was unclear. So use of ESWT with meridian and acupoint theory for knee arthritis has limited evidence compared to usual care.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.16-27
• /
• 2015

Holography technology which was developed by Dennis Gabor (1900~1979) in 1948 is a technology to record wave planes of actual 3D objects. It is known as the only technology which can express 3D information most perfectly close to human-friendly. Holography technology is widely used in advertisement, architecture and arts as well as science technology areas. Especially, digital holographic print which is an applied area is greatly used in military map, architecture map and cultural asset restoration by printing and reproducing 3D information. Holography is realized by recording and reproducing the amplitude and phase information on high resolution film using coherent light like laser. Recording materials for digital holographic printer are silver halide, photoresist and photopolymer. Because the materials have different diffraction efficiency according to film characteristics of each manufacturer, appropriate guide lines should be suggested through efficiency analysis of each film. This paper suggests appropriate guide lines through the diffraction efficiency measurement of silver halide which is a holographic printer recording medium. And the objective of this study is to suggest appropriate guide lines through diffraction efficiency analysis of Ultimate 08-C and PFG-03C which are commercially used. The experiment was prepared by self-diffraction efficiency system which measures the strength with the defector by penetrating RGB recording medium and concentrating diffracted beams through collimating lens. The experiment showed Geola's PFG-03C which is a silver halide for full color has price/performance advantage in optical hologram recording, but recording angles and reproduction angles are irregular for digital holographic printer recording. Ultimate's Ultimate08-C for full color shows its diffraction efficiency is relatively stable and high according to recording angles and laser wavelength.

• KDI Journal of Economic Policy
• /
• 제39권2호
• /
• pp.53-74
• /
• 2017

This paper focuses on the recent extraordinary growth of Chinese cross-border online shopping and draws implications for firm strategies and government policies in Korea to utilize the phenomenon as an opportunity to expand into a broader market via e-commerce exports. I conduct a survey of Chinese cross-border online consumers to identify constraining and determining factors during the stages of their purchase decisions of Korean products. Given the fact that Chinese cross-border online shopping is at the incipient stage and consumers have expressed a strong intent to repurchase, future strategies should focus on attracting new consumers. Accordingly, Korean firms should build a powerful brand image, improve product quality and post-purchase services, and take full advantage of the popularity of the Korean Wave. Meanwhile, the government must step up policy efforts by, for instance, improving e-commerce export statistics, simplifying logistics and clearance procedures, and building trust in Chinese consumers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.588-590
• /
• 1996

An AC induction motor or constant speed characteristics has been widely used as power source because of simple structure and low maintenance cost in industrial field. The variable frequency AC source with a conventional inverter which is composed or power semi-conductors and drive systems contains much noises in sine wave current due to high speed switching or direct current. In this paper, the low pass LC filter for a variable speed induction motor driven by a full bridge inverter is introduced to solve EMI problem originated by much noise current. The modified LC filter based on the 3rd order Butterworth LC filter is used for the computer simulations and real experiments. The characteristics or proposed LC filter are investigated through FET analysis.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.157-164
• /
• 2000

A machine tool generally has some serious stability problems in the form of tool chatter during the cutting process. Chatter vibration deteriorates the surface finish, reduce tool and machine life, accelerates machine tool system component wear, and may lead to an unacceptable noise sound in the working environment. In this study, the behavior of spectral density of AE signal and principal cutting force signal in order to monitor the chatter vibration in the cutting process has been investigated. From the results, the reliability of proposed monitoring method has been confirmed.