• 제목/요약/키워드: full-time

검색결과 4,034건 처리시간 0.035초

지역산업 육성정책에 대한 고찰 (Studies on Development Policies for Regional Industry)

  • 김동수;이두희;김계환
    • 한국경제지리학회지
    • /
    • 제14권4호
    • /
    • pp.467-485
    • /
    • 2011
  • 우리나라는 한국전 이후 세계 경제를 따라잡기 위하여 수도권과 동남권 일부 지역을 중심으로 경제개발 정책을 추진하여 왔다. 그 결과 수도권과 비수도권 간의 지역격차가 점차 커지게 되었고 문민정부의 출범 이후 지방자치제의 도입과 함께 비수도권 지역에서 해당지역의 발전에 대한 관심을 갖기 시작하였다. 국민정부의 출범과 동시에 4개(부산, 대구, 경남, 광주) 지자체에서 지역산업 진흥사업을 추진하기에 이르렀고 이것이 지역정책의 출발점 되었다. 이후 참여정부에서는 지역정책의 기반을 마련하였다. 국가균형발전을 실현하기 위하여 국가균형발전특별법 제정, 국가균형발전특별회계 신설, 국가균형발전 위원회 설립 및 국가균형발전5개년계획 수립 등 일련의 제도적 기반을 구축하였다. 지역산업 육성을 위하여 기존의 4개 지역 외에 9개 지역을 추가하여 4+9의 전략산업 육성사업을 추진하였다. 이후 현 정부에서는 세계적인 지역정책의 변화에 맞추어 보다 효율적인 정책집행을 위하여 획일적인 균형보다 지역경쟁력 강화로 정책목표를 수정하였고 지역정책의 공간범주 또한 규모의 경제에 맞게 초광역개발권, 광역경제권, 기초생활권으로 구분하여 차별화된 정책을 추진하였으며, 지방분권 강화를 위하여 포괄보조금 성격의 예산을 늘였다. 지역산업을 육성하기 위하여 광역경제권 수준에서 선도산업 육성사업, 시도 수준에서는 전략산업 육성사업, 기초생활권에서는 지역특화산업 육성사업을 추진하여 미래의 성장동력 확보 및 지역경제 활성화를 도모하였다. 이러한 지역정책의 중심에는 지식경제부가 주도적인 역할을 수행하고 있으며, 산업 육성을 통한 지역발전을 추진하고 있다는 점에서 다른 나라와는 차이를 보이고 있다. 이제 지역산업 육성으로 시작된 지역정책이 어느덧 13여년이 되어 정책의 성과를 바탕으로 정책 방향이나 추진전략을 되짚어 볼 때가 되었다. 본 연구는 그 동안 추진되어 온 지역산업 육성정책을 전체적으로 검토하고 향후의 정책 수립을 위하여 문제점과 수정보완 방향에 대하여 정리하였다. 우선 2012년과 2013년에 종료되는 선도산업과 전략산업 육성사업의 재편이 검토 중에 있다. 두 사업에서 선정한 산업들의 중복은 물론 지원프로그램 간의 중복 등의 문제가 표출되었기 때문이다. 또한, 단순한 기술개발 지원 등과 같은 재정보조보다는 산업생태계 구축 등 간접적이지만 기업의 자생력을 강화할 수 있는 지원 방안이 필요하다. 마지막으로 부처별로 분할된 각각의 부문별 정책이 아닌 지역산업정책 추진 주체간의 원활한 소통을 바탕으로 하는 포괄적인 지역산업 육성 정책을 마련하여야 할 것이다.

  • PDF

천안함 폭침 이후 북한의 군사도발 양상과 전망 (Trends and Prospects of N. Korea Military Provocations After the Sinking of ROKS Cheon-an)

  • 김성만
    • Strategy21
    • /
    • 통권34호
    • /
    • pp.58-92
    • /
    • 2014
  • Even after S. Korea took 5.24 Measure(24 May 2014), N. Korea has not stopped raising provocations such as the shelling of Yeonpyeong Island, electronic and cyber attacks. To make matters worse, the communist country lunched long-range missiles(twice) and conducted 3rd nuclear test, escalating tensions which could possibly lead to an all-out war. Korean Government failed to respond properly. However, escalation into an all-out war was deterred by the CFC immediately carrying out its peacetime duty(CODA). The US made a rapid dispatch of its augmentation forces(Aircraft carrier, nuclear-powered submarine, strategic bomber, F-22) to the Korean Peninsula. In recognition of the importance of the Combined Forces Command, since May 2013 the Park Geun-Hye Administration has been pushing ahead with re-postponement of Wartime Operational Control Transfer(which initially meant the disassembling of the CFC as of 1 December 2015) More recently, there has been a series of unusual indicators from the North. Judging from its inventory of 20 nuclear weapons, 1,000 ballistic missiles and biochemical weapons, it is safe to say that N. Korea has gained at least war deterrence against S. Korea. Normally a nation with nuclear weapons shrink its size of conventional forces, but the North is pursuing the opposite, rather increasing them. In addition, there was a change of war plan by N. Korea in 2010, changing 'Conquering the Korean Peninsula' to 'Negotiation after the seizure of the Greater Seoul Metropolitan Area(GSMA)' and establishing detailed plans for wartime projects. The change reflects the chain reaction in which requests from pro-north groups within the South will lead to the proclamation of war. Kim, Jeong-Un, leader of N. Korean regime, sent threatening messages using words such as 'exercising a nuclear preemptive strike right' and 'burning of Seoul'. Nam, Jae-June, Director of National Intelligence Service, stated that Kim, Jung-Un is throwing big talks, saying communization of the entire Korean Peninsula will come within the time frame of 3 years. Kim, Gwan-Jin, Defense Minister, shared an alarming message that there is a high possibility that the North will raise local provocations or a full-fledged war whenever while putting much emphasis on defense posture. As for the response concept of the Korean Government, it has been decided that 'ROK·US Combined Local Provocation Counter-Measure' will be adopted to act against local provocations from the North. Major provocation types include ▲ violation of the Northern Limit Line(NLL) with mobilization of military ships ▲ artillery provocations on Northwestern Islands ▲ low altitude airborne intrusion ▲ rear infiltration of SOF ▲ local conflicts within the Military Demarcation Line(MDL) ▲ attacking friendly ships by submarines. Counter-measures currently established by the US involves the support from USFK and USFJ. In order to keep the sworn promise, the US is reinforcing both USFK and USFJ. An all-out war situation will be met by 'CFC OPLAN5027' and 'Tailored Expansion Deterrence Forces' with the CFC playing a central role. The US augmentation forces stands at 690,000 troops, some 160 ships, 2,000 aircraft and this comprise 50% of US total forces, which is estimated to be ninefold of Korean forces. The CFC needs to be in center in handling both local provocations and an all-out war situation. However, the combat power of S. Korean conventional forces is approximately around 80% of that of N. Korea, which has been confirmed from comments made by Kim, Gwan-Jin, Defense Minister, during an interpellation session at the National Assembly. This means that S. Korean forces are not much growing. In particular, asymmetric capabilities of the North is posing a serious threat to the South including WMD, cyber warfare forces, SOF, forces targeting 5 Northwestern Islands, sub-surface and amphibious assault forces. The presence of such threats urgently requires immediate complementary efforts. For complementary efforts, the Korean Government should consider ① reinforcement of Korean forces; putting a stoppage to shrinking military, acquisition of adequate defense budget, building a missile defense and military leadership structure validity review, ② implementation of military tasks against the North; disciplinary measures on the sinking of ROKS Cheon-an/shelling of Yeonpyeong Islands, arrangement of inter-Korean military agreements, drawing lessons from studies on the correlation between aid for N. Korea, execution of inter-Korean Summit and provocations from the North, and ③ bolstering the ROK·US alliance; disregarding wartime operational control transfer plan(disassembling of CFC) and creation of a combined division.

생쥐 난포의 체외배양 중 생식샘자극호르몬에 따른 미세리보핵산 발현 양상 (Profiles of microRNAs in Mice Follicles According to Gonadotropins during in vitro Culture)

  • 김용진;구승엽;김윤영;오선경;김석현;최영민;문신용
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제36권4호
    • /
    • pp.265-274
    • /
    • 2009
  • 목 적: 미세리보핵산 (microRNA, miR)은 전사 후 (post-transcriptional) 단계에서 목표 유전자 (target gene)의 발현을 억제하여 세포의 발달과 성장에 중요한 역할을 하는 것으로 알려져 있다. 그러나 난포의 성장과정 중의 miR 발현 양상에 대해서는 잘 알려져 있지 않다. 따라서 존 연구는 생쥐 난포의 체외배양 후 생식샘자극호르몬 (gonadotropin)과 사람융모성생식샘자극호르몬 (hCG) 첨가에 따른 난자와 난구세포에서의 miR 발현 양상을 살펴보고자 수행되었다. 연구방법: 생후 12일된 생쥐 (C57BL6)의 난소 적출 후, 전동 난포 (preantral follicle)를 분리하여 무작위로 $20\;{\mu}L$ 점적의 배양액만 있는 군 (control group), 재조합 난포자극호르몬을 첨가한 군 (FSH group), 재조합 황체형성호르몬을 첨가한 군 (LH group), FSH와 LH를 같이 첨가한 군 (FSH+LH group)으로 나누어 배양하였다. 난포가 충분히 성장하였을 때, 다시 hCG를 첨가한 군 (hCG (+) group)과 첨가하지 않은 군 (hCG (-) group)으로 나누어 hCG (-) group에서 난자와 난구세포를 각각 분리하여 RNA를 추출하였다. 36시간 후, 배란된 난자 난구세포 복합체 (cumulus oocyte complex, COC)에서 난자와 난구세포를 각각 분리하여 RNA를 추출하고, mmu--miR-16, -miR-27a, -miR-126, -miR-721 등의 miR에 대한 primer를 이용하여 실시간 중합연쇄반응을 시행하였다. 결 과: 배란율과 MII 난자 생성율은 다른 군들에 비해 FSH+LH군에서 유의하게 높았다. 각 군내의 난자와 난구세포 사이에서도 miR 발현 양상의 차이가 관찰되었다. 또한, 난자와 난구세포에서의 miR 발현 양상은 각 군간 차이가 있었으며, hCG (+)군과 hCG (-)군간에도 차이를 나타냈다. 결 론: 생쥐 난포의 체외배양 중 난자 및 난구세포에서의 miR 발현 양상은 gonadotropin의 종류 및 난자의 성숙도에 따라 다르다. 이러한 결과는 표적 유전자의 발현에 대한 추후 연구를 통한 확인이 필요할 것으로 사료된다.

건조스트레스가 수리취의 광합성 및 수분관련 특성에 미치는 영향 (Drought Stress Influences Photosynthesis and Water Relations Parameters of Synurus deltoides)

  • 이경철;이학봉
    • 한국산림과학회지
    • /
    • 제106권3호
    • /
    • pp.288-299
    • /
    • 2017
  • 이 연구는 건조스트레스가 수리취의 생리적 반응에 미치는 영향을 알아보고자 수행하였으며, 건조스트레스는 25일 간의 단수처리를 통해 유도하였다. 건조스트레스가 진행됨에 따라 새벽 녘 수분포텐셜(${\Psi}_{pd}$)과 정오의 수분포텐셜(${\Psi}_{mid}$)이 모두 감소하였으며, 수분불포화도(WSD)는 약 7배 증가하였다. 특히 일중 수분포텐셜차(${\Psi}_{pd}-{\Psi}_{mid}$)는 처리 후 10일까지 0.22~0.18 MPa 범위로 큰 차이를 나타냈으나 이후에는 차이가 크게 줄어드는 경향을 보였다. 수리취는 건조스트레스 처리 후 15일부터 기공전도도와 기공증산속도의 감소가 두드러졌고, 처리 20일 이후에는 최대광합성 속도와 순양자수율 역시 큰 폭으로 감소한 반면 수분이용효율은 반대의 경향을 보였다. 이것은 기공을 통한 $CO_2$와 수분의 조절이 원활하지 못해 광합성량의 감소가 일어난 것을 의미한다. JIP 분석을 통해 단수처리 15일 이후에 기능지수($PI_{ABS}$) 및 에너지전달 효율의 감소가 두드러진 것으로 나타났으며, 광계 2의 활성이 감소한 것을 보여준다. 엽의 원형질 분리시 삼투포텐셜 ${\Psi}_o{^{tlp}}$은 -0.4 MPa, 최대포수시의 삼투포텐셜 ${\Psi}_o{^{sat}}$은 -0.35 MPa의 삼투적 적응 반응을 나타냈으며, 최대탄성계수($E_{max}$)의 탄성적 적응은 9.4 MPa로 나타나 수리취는 건조스트레스에 따라 삼투적 적응과 탄성적 적응이 모두 나타나는 것을 알 수 있었다. Vo/DW, Vt/DW와 같은 수분특성인자는 건조스트레스에 따라 증가되는 것으로 나타났다. 결과적으로 수리취는 새벽녘 엽수분포텐셜이 -0.93 MPa 이하로 저하되면 광합성 활성의 감소가 크게 나타나고, 건조스트레스에 따라 삼투적 적응과 탄성적 적응이 나타나 이것이 이 식물의 중요한 적응방법임을 알 수 있었다.

앙트러프러너십 교육과 창업기회인식 역량과의 관계: 숙명여대 앙트러프러너십 전공 사례를 중심으로 (Relationship between Entrepreneurial Education and Entrepreneurial Opportunity Recognition: Focused on the Entrepreneurship Major College Students)

  • 이우진;손종서;오혜미
    • 벤처창업연구
    • /
    • 제13권3호
    • /
    • pp.71-83
    • /
    • 2018
  • 최근 앙트러프러너십을 독자적인 학문의 영역으로 정의하고자하는 노력들이 진행되고 있다. Shane & Venkataraman 등의 학자들은 앙트러프러너십의 연구가 창업자가 되기 위한 사람들에 대한 관심에서 창업가 기질이 있는 개인과 가치있는 기회의 결합을 이해하는 것 쪽으로 옮겨져 가고 있다고 하였다. 한국은 대학을 기반으로 기업가정신교육 또는 창업교육이라는 이름하에 교육이 확산되고 있는 실정이며, 2010년 국내 최초로 숙명여자대학교에서 앙트프러너십 전공학과가 생성되기도 하였다. 기존의 연구를 통해 창업교육이 창업의지에 긍정적인 영향을 미친다는 다수의 연구 결과가 발표되었으나, 창업학의 학문적 차별성이라 주장하는 'Opportunity'에 대한 연구는 미흡한 실정이다. 또한, 국내 유일의 앙트러프러너십 전공생들을 대상으로 앙트러프러너십 교육의 품질요인이 전공생들의 기회인식에 어떠한 영향을 주는지, 또한 창업자기효능감 및 교육의 몰입도에 따라 어떠한 영향을 미치는지에 밝혀진 바는 없다. 본 연구를 통해 앙트러프러너십 전공교육의 만족도가 창업기회인식에 어떠한 영향을 미치는지 검증하고, 교육의 몰입도에 따라 창업기회 인식의 매개효과에 대해 살펴보고자 한다. 설문은 2주간 실시되었으며 총 84부가 회수되었고 회수된 설문 전체를 R프로그램을 통해 통계 분석 하였다. 분석결과 교육의 만족도가 창업기회인식에 긍정적인 영향을 미치는 것으로 나타났으며, 몰입도는 교육만족도가 창업기회인식에 미치는 영향에 있어 완전매개효과가 있는 것으로 나타났다. 이러한 분석결과를 통해 앙트러프러너십 교육을 받은 전공생들의 창업기회를 발견하는 것에 지각된 역량이 높아지는 것이 확인되었고, 이에 몰입도가 교육의 만족과 창업기회 인식의 관계에 있어 중요한 역할을 하고 있음을 실증 분석을 통해 확인하였다. 전공자들의 창업교육 만족도와 몰입을 통한 창업기회 인식은 향후 창업활동으로 기대할 수 있을 것이다.

톨 페스큐의 종자생산에 관한 연구. I. 질소비료의 시비수준 및 분시방법이 톨 페스큐 ( Festuca arundinacea S. ) 의 종자생산에 미치는 영향 (Studies on the Seed Production of Festuca arundinacea Schreb I. Effect of nitrogen Fertilization level and method of its application on the seed production of level and method of its application on the seed production of Festuca arundinacea)

  • 박근제;권두종;이종열;양종성
    • 한국초지조사료학회지
    • /
    • 제5권2호
    • /
    • pp.100-105
    • /
    • 1985
  • 본(本) 시험(試驗)은 Tall fescue(Festuca arundinarea s. 의 Alta품종(品種)에 있어서 채종재배(採種栽培)를 위(爲)한 질소비료(窒素肥料)의 시비수준(施肥水準) 및 분시방법(分施方法)을 구명(究明)코자 3 시비수준(施肥水準)(120, 180, 240kg/ha)과 4 분시방법(分施方法)((1)봄 : 100%%, (2) 가을, 봄 : 각각 50%, (3)봄, 출수전 : 각각 50%, (4) 가을 : 50%, 봄, 출수전 : 각각 25%)으로 분할구(分割區) 4 반복(反覆)으로 포장(圃場) 배치(配置)하여 1979년(年) 9월(月)부터 1981년(年) 10월(月까)지 축산시험장(畜産試驗場)에서 실시(實施)되었다. 1. 톨 페스큐의 출수기(出穗期)는 5월(月) 21일(日), 개화기(開花期)는 이보다 10여일 늦은 6월(月) 1-3 일경(日頃)이었으며 종자(種子) 수확기(收穫期)는 개화성기(開花盛期) 22-23일(日) 후(後)인 6월(月) 25일경(日頃)이었다. 채종시(採種時)의 평균(平均) 초장(草長)은 127cm, 수장(穗長)은 2.72g였으며 $1m^2$당(當) 수수(穗數)는 85-107개(個)였다. 3. 누년(累年) 평균(平均) 종자수량(種子收量) 678.8kg/ha였으며 N-240kg/ha를 가을에 50%, 봄과 출수전(出穗前)에 각각(各各) 25% 시용(施用)한 것이 채종량(採種量) 781.9kg/ha로서 가장 많았다. 4. 채종(採種)된 종자(種子)의 평균(平均) 발아율(發芽率)은 87.0%였으며 분시방법(分施方法)이 다양(多樣)할수록 발아율(發芽率)이 높은 경향(傾向)이었다. 5. 채종후(採種後) 2회(回) 예취(刈取)한 재생목초(再生牧草)의 전체(全體) 평균(平均) 건물수량(乾物收量)은 6155kg/ha였고 질소시비량(窒素施肥量)이 많을수록 생산량(生産量)은 증가(增加)하였으며, 분시방법(分施方法)에 있어서는 봄에 전량시용(全量施用)한 것이 우수(優秀)하였다.

  • PDF

오갈피나무속(屬)(Acanthopanax) 식물의 번식(繁殖)에 관한 연구(硏究) II. 종자형질(種子形質)과 배(胚) 발육(發育)특성 (Study on the Propagation of Acanthopanax Plants II. Characteristics of Seed and Growth of Embryo in Stratifying Treatment)

  • 안상득
    • 한국약용작물학회지
    • /
    • 제1권1호
    • /
    • pp.16-23
    • /
    • 1993
  • 오갈피속식물의 종자들은 파종(播種) 후 발아(發芽)하는데 오랜 시간을 필요로 한다. 이러한 원인(原圖)이 오갈피속 식물의 종자가 미숙배를 갖고 있기 때문인지, 만약 미숙배를 갖고 있는 종자라면 인위적인 후숙처리로 배(胚의) 발육(發育)이 어느 정도 촉진되는지를 구명하므로써 보다 효과적인 종자번식방법(種子繁殖方法)을 개발할 수 있을 것이다. 따라서 오갈피속 식물들의 종자형질(種子形質)을 조사하고 후숙처리기간중 배(胚)의 발달정도를 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 종자의 크기는 오갈피, 서울오갈피 종자가 가장 크고 지리산오갈피와 섬오갈피 및 오가나무의 순서로 작은 경향이었다. 2. 종피(種皮)의 개열정도(開裂程度)는 오갈피, 서울오갈피의 종피는 각질이 반경질(半硬質)로 연화(軟되化어) 종피의 열개현상을 보이지 않았으나 섬오갈피는 이들보다 각질성(角質性)으로 gibberlline처리구에서만 80%이상의 높은 열개현상(裂開現像)을 나타내었다. 3. 공시된 식물들의 후숙처리시 배(胚)의 발육은 gibberelline을 처리한 종자에서만 배(胚)의 발육이 신장되어 완전한 자엽(子葉)이 형성되고, 종(種)에 따라서는 procambium도 뚜렷이 관찰된 반면, 무처리(無處理) 종자(種子)에서는 생장속도가 매우 늦어 배가 어느 정도 신장하는데 불과하여 발아력(發芽力)을 기대할 수 없었다. 4. 오갈피속 식물종자의 후숙처리(後熟處理) 전(前) 및 후숙기간 중 배(胚)의 크기와 발달정도를 관찰한 결과 인삼종자와 같이 미숙배(未熟胚)를 갖고 있기 때문에 발아에 오랜 시간이 소요된다는 사실을 알 수 있었다.분함양(殿含粉量)은 수원(水原) 3호(號)가 55.9%로 가장 높았고 수원(水原) 5호(號)는 51.7%로 가장 낮게 나타났다. 아미노산 조성(組成)에서는 김제종(金堤種)과 수원(水原) 6호(號)가 비슷한 경향(傾向)을 보였고 수원(水原) 3호(號)는 김제종(金堤種)보다 대체로 낮은 경향(傾向)을 보였다.-3}\;M$의 $K^+$을 먼저 첨가하여 2시간 동안 progesterone 전환 반응을 실시한 후에 $10^{-4}\;M$$Cd^{2+}$을 첨가하였을 때 가장 높은 $11\{alpha}-hydroxyprogesterone$의 수득률을 얻을 수 있었다.감소를 일으키며, 이러한 adenosine 작용은 magnesium이온에 의존적임을 알 수 있었다.mg/dL, 여자의 경우 각각 133.4 mg/dL, 149.4 mg/dL, 150.0 mg/dL로 59세 이하에서만 여자가 높고 다른 연령 군에서는 남자가 높았으며 연령증가와 함께 유의성은 없으나 증가하는 경향을 보였다. 혈청 총 콜레스테롤농도의 평균은 $189.53{\pm}4.73 mg/dL$, $157.93{\pm}4.96 mg/dL$이었고 남자가 유의적으로 높았다(p<0.05). 남녀 각각 59세 이하, 60대, 70대 이상군에서 185.0 mg/dL, 199.3 mg/dL, 180.9 mg/dL과 161.4 mg/dL, 180.9 mg/dL, 164.8 mg/dL였다. $40\~50$대는 남자가 유의적으로 높았으며

  • PDF

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

상(象)의 개념(槪念)과 한의학적(韓醫學的) 적용(適用) (The concept of Sang(象) and its application in the Oriental Medicine)

  • 백유상;박찬국
    • 대한한의학원전학회지
    • /
    • 제12권2호
    • /
    • pp.92-109
    • /
    • 1999
  • They say Y$\breve{o}$k'ak(易學) is the root of Oriental studies. This means philosophy, astronamy, geography, medicine, music, numbers are all based on Yin-Yang, and Five phases theory of Y$\breve{o}$k'ak. Nowadays studies are very much specialized but as we go back to old times, we cannot dearly set these studies apart. All the studies can be comprehensively understood with Y$\breve{o}$k'ak(易學). The original purpose of Y$\breve{o}$k'ak is to predict future with highly symbolized signs, Sang-Su(象數). However you cannot fully understand Y$\breve{o}$k'ak without knowing the principle of change in Sang-Su itself. We have to keep thinking about how we should further study Y$\breve{o}$k'ak, treat diseases with Sang-Su, and how Sang-Su can be used in medicine. As a previous step to this process, I will consider relationship of Y$\breve{o}$k'ak and medicine in this paper. This study will help us to set the goal and method in studying medicine. Conclusions of this paper are following: 1. The purpose of understanding a subject is to understand the principle of the subject. The principle of every subject can be turned into principle of changes in the universe. This principle is not affected by time nor space. It is only seen through the changes of subjects. 2. The reason we cannot easily understand the principle is that we have biased mind. How we should overcome this is through developing virtue, and by keep inspecting things over and over. 3. We see the outcome of changes inside but we should not neglect the principle. Therefore we see the principle through Sang. Sang is in between Principle(理) and Things(物), thereby has characteristics of both. Which means it is much like Principle but specific Things is related and it is much like Things but it is not easily understood. 4. There are various kinds of Sang. Mind-Sang(心象) is an image that comes before expressing it with symbols or words. When it is expressed in symbols or words, it is no longer considered as same Sang. Sang in symbol are Kwaesang(卦象), Hyosang(爻象) and Sang in words is Kyesa(卦辭). The characteristic of all these Sang is that it cannot be explained through the logics. 5. If we call Sanghak as the study with Sang, the method is same as that of understanding the principle. The fundamental purpose of Sanghak is to understand the principle of things and then apply this principle to the practical world so that the world can be a better place. So I would say Sanghak is the study of a saint and a ruler. 6. Since the object of medicine is human being who are the mixture of Principle and Ki, we can use Sang which is also related to both Principle and Ki. Actually terms we use in Oriental medicine are not easily understood without the knowledge of Sanghak. 7. When we diagnose a patient, we are looking for Sang that comes from the body inside. When we do the treatment, we cannot neglect the original change that's happening in our body. Therefore studying Sang is a necessary step to do the full diagnosis and treatment. 8. The method of studying medicine is first to get rid of biased mind, taking right Sang from various classics and then apply those Sang to actual situations.

  • PDF

미숙아 동맥관개존증의 지연된 폐쇄가 예후에 미치는 영향 (Delayed closure effect in preterm infants with patent ductus arteriosus)

  • 이현주;심규홍;정경은;이진아;최창원;김이경;김한석;김병일;최중환
    • Clinical and Experimental Pediatrics
    • /
    • 제51권10호
    • /
    • pp.1065-1070
    • /
    • 2008
  • 목 적: 초극소 체중아에서 혈역학적으로 의미 있는 동맥관 개존증은 심각한 합병증의 발생을 증가시키나 동맥관 폐쇄에 대한 적절한 시점과 치료 방법에 대한 원칙은 없는 실정이다. 본 연구는 혈역학적으로 의미 있는 동맥관 개존증의 지연된 폐쇄가 예후에 미치는 영향을 분석하고자 하였다. 방 법: 2005년 3월부터 2007년 5월까지 본원 신생아중환자실에 입원한 1,000 g 미만의 동맥관개존증 환아 58례($26{\pm}2wk$, $782{\pm}146g$)를 대상으로 조기 폐쇄군(생후 7일 이내 폐쇄) 38례와, 지연 폐쇄군(생후 7일 이후 폐쇄) 20례로 분류하여 분석하였다. 혈역학적으로 의미 없는 동맥관 개존증 4례, 선천성 기형 1례, 생후 7일 이내에 사망한 3례는 제외되었다. 결과: 대상 환아 58명의 평균 재태 주령은 $26{\pm}2$주, 출생체중은 $782{\pm}146g$이었다. 주산기 요인으로 지연 폐쇄군에서 재태주령이 짧고($25.7{\pm}1.7wk$ vs $27.1{\pm}2.0wk$), 체외 수정의 빈도가 높았으며(55% vs 24%, P=0.017), 산모의 전자간증이 적었다(5% vs 34%, P=0.013). 동맥관 직경은 조기 폐쇄군과 지연 폐쇄군 간에 통계학적으로 유의한 차이가 없었다. 기관지 폐 이형성증(95% vs 65%, P=0.012), 뇌실내 출혈(70% vs 39%, P=0.027), 비정상적 청력검사 결과(32% vs 8%, P=0.024)는 지연 폐쇄군에서 유의하게 증가하였다. 또한 재태주 령을 보정한 다중회귀분석에서 동맥관 폐쇄가 지연될수록 인공 환기 치료기간(r2=0.362, P=0.008), 총 입원기간(r2=0.257, P=0.020), 완전 장관수유까지 걸린시간(r2=0.305, P<0.001), 총 정맥영양기간(r2=0.224, P=0.010)이 유의하게 증가하였다. 결 론: 초극소 체중아에서 혈역학적으로 의미 있는 동맥관 개존증은 폐쇄가 지연될수록 여러 합병증을 유발하므로 출생 1주 이내에 적극적인 약물적, 수술적 치료가 필요할 것으로 생각된다.