• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.33-43
• /
• 2019

A comparison between sea trial measurements and full-scale CFD results is presented for two self-propelled ships. Two ships considered in the present study are: a general cargo carrier at Froude number $F_n=0:182$ and a car carrier at $F_n=0:254$. For the general cargo carrier, the propeller rotation rate is fixed and the achieved speed and trim are compared to sea trials, while for the car carrier, the propeller rotation rate is adjusted to achieve the 80% MCR. In addition, three grids are used for each ship in order to assess the grid refinement sensitivity. All simulations are performed using the Naval Hydro pack based on foam-extend, a community driven fork of the OpenFOAM software. The results demonstrate the possibility of using high-fidelity numerical methods to directly calculate ship scale flow characteristics, including the effects of free surface, non-linearity, turbulence and the interaction between propeller, hull and the flow field.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.208-215
• /
• 2011

A full-scale field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. The first Korean icebreaking research vessel 'ARAON', after her delivery in late 2009, had a sea ice field trial in the Arctic Sea during July-August, 2010. This paper describes the test procedures and data analysis on the icebreaking performance of the IBRV ARAON. The data gathered from the icebreaking performance test in the Chukchi Sea and the Beaufort Sea during the Arctic voyage of ARAON includes the speed and engine power of the ship as well as sea ice thickness and strength data. The air temperature, wind speed and heading of the ship were also measured during each sea ice trial. The ARAON was designed to break 1 m thick level ice with a flexural strength of 630kPa at a continuous speed of 3knots. She is registered as a KR POLAR 10 class ship. The principal dimensions of ARAON are 110 m, 19 m and 6.8 m in length, breadth and draft respectively. She is equipped with four 3,500kW diesel-electric main engines and two Azipod type propulsion motors. Four sea ice trials were carried out to understand the relationship between the engine power and the ship speed, given the Arctic ice condition. The analysis shows that the ARAON was able to operate at 1.5knots in a 2.5m thick medium ice floe condition with the engine power of 5MW, and the speed reached 3.1 knots at the same ice floe condition when the power increased to 6.6MW. She showed a good performance of speed in medium ice floe compared to the speed performance in level ice. More detailed analysis is summarized in this paper.

• 한국지반신소재학회논문집
• /
• 제3권1호
• /
• pp.27-36
• /
• 2004

본 논문에서는 다단식보강토옹벽의 해석과 시험 시공을 통해 안정성을 검토한 내용을 다루었다. 한계평형에 근간을 둔 현행의 설계기준에 근거하여 설계된 각기 다른 네 개의 현장 옹벽에 대해 내 외적 안정성 대한 안정성 검토를 실시하였으며, 국외 보강토옹벽의 설계법인 FHWA 및 NCMA의 설계에 의거한 다단식보강토옹벽의 시험시공을 통해 상 하단 옹벽의 상호작용에 의한 거동에 대해 분석을 실시하였다. 본 논문에서는 연구결과를 토대로 다단식보강토옹벽의 역학적 거동을 이해하고, 설계 및 시공의 주안점을 언급하였다.

• 화약ㆍ발파
• /
• 제41권3호
• /
• pp.26-37
• /
• 2023

발파공법을 이용한 터널 건설 시 발생하는 진동을 최소화할 수 있는 폭약량의 결정을 위해서는 현장에서 시험발파, 혹은 유사조건에서의 진동기록을 분석하여 발파진동계수 K, n을 도출해야 한다. 본 연구에서는 시험발파를 수행하지 못할 경우, 합리적인 K 및 n을 도출할 수 있는 기법의 개발을 목적으로 하였다. 이를 위해 실규모 시험발파 자료를 수집한 후, 심층학습(DL)을 활용하여 화약류의 종류, 심발공법, 암반의 성인 및 종류, 암반등급에 따라 발파진동계수(K, n)를 예측할 수 있는 방법을 연구하였다. 또한 시추공 시험발파 결과의 한계성을 보완하고, 현실에 좀 더 부합하는 설계 수행을 목적으로 실규모 및 시추공 시험발파 결과 간의 보정값을 산정하였다. 본 연구결과 시추공 시험발파 결과식에 따른 사용 가능한 폭약량을 비교하였을 경우, 심층학습(DL)에 의한 결과는 50%이상, 보정값을 반영한 결과는 기타 발파진동 추정식과 유사하거나 약 20% 더 사용할 수 있어서 보다 경제적 설계가 가능하였다.

• Structural Monitoring and Maintenance
• /
• 제1권1호
• /
• pp.131-157
• /
• 2014

Special track systems used to divert a train to other directions or other tracks are generally called 'railway turnout'. A traditional turnout system consists of steel rails, switches, crossings, steel plates, fasteners, screw spikes, timber bearers, ballast and formation. The wheel rail contact over the crossing transfer zone has a dip-like shape and can often cause detrimental impact loads on the railway track and its components. The large impact also emits disturbing noises (either impact or ground-borne noise) to railway neighbors. In a brown-field railway track where an existing aged infrastructure requires renewal or maintenance, some physical constraints and construction complexities may dominate the choice of track forms or certain components. With the difficulty to seek for high-quality timbers with dimensional stability, a methodology to replace aged timber bearers in harsh dynamic environments is to adopt an alternative material that could mimic responses and characteristics of timber in both static and dynamic loading conditions. A critical review has suggested an application of an alternative material called fibre-reinforced foamed urethane (FFU). The full-scale capacity design makes use of its comparable engineering characteristics to timber, high-impact attenuation, high damping property, and a longer service life. A field trial to investigate in-situ behaviours of a turnout grillage system using an alternative material, 'fibre-reinforced foamed urethane (FFU)' bearers, has been carried out at a complex turnout junction under heavy mixed traffics at Hornsby, New South Wales, Australia. The turnout junction was renewed using the FFU bearers altogether with new special track components. Influences of the FFU bearers on track geometry (recorded by track inspection vehicle 'AK Car'), track settlement (based on survey data), track dynamics, and acoustic characteristics have been measured. Operational train pass-by measurements have been analysed to evaluate the effectiveness of the replacement methodology. Comparative studies show that the use of FFU bearers generates higher rail and sleeper accelerations but the damping capacity of the FFU help suppress vibration transferring onto other track components. The survey data analysis suggests a small vertical settlement and negligible lateral movement of the turnout system. The static and dynamic behaviours of FFU bearers appear to equate that of natural timber but its service life is superior.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.143-148
• /
• 2013

본 연구의 목적은 빙해역을 운항하는 선박의 쇄빙시 깨진 해빙에 의해 선수부 좌현 외판에 작용하는 국부 빙하중을 계측한 신호의 특성을 조사하는 것이다. 한국 최초의 쇄빙연구선인 아라온호를 이용하여 2010년 8월초 북극해에서 실선 시험을 수행하여 선수부에 설치된 변형률 게이지로부터 국부적인 빙하중에 의한 신호를 계측하였다. 국부적인 빙하중에 의한 구조 응답 특성을 반영한 계측 신호는 전형적인 유체 충격압에 대한 하중-시간 이력과 다소 다른 특성을 갖는 것도 있음이 파악되었다. 본 연구에서는 계측 신호에 대한 시간 이력을 분석하고, 무차원화된 특성값들로 나타내었다.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.27-34
• /
• 2018

PURPOSES : The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS : Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS : The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.88-92
• /
• 2013

The icebreaking research vessel (IBRV) ARAON had her second ice trial in the Arctic Ocean in the summer season of 2010. During the voyage, the local ice loads acting on the bow of the port side were measured using 14 strain gauges. These measurements were carried out in three icebreaking performance tests. To convert the measured strains into the local ice pressures, a finite element model of the instrumented area was developed. The influence coefficient method (ICM), which uses the influence coefficient from the finite element model, and the direct method, which uses the measured strain, were selected as the conversion methods. As a result, the maximum measured pressure was 1.236MPa, and the average difference between ICM and the direct method was about 5% for an area of $0.2m^2$. The pressure-area relationship of the measurement falls below the range of the existing pressure-area curve, which is due to the low ice strength of melted ice in the summer.

• 한국지반공학회논문집
• /
• 제21권3호
• /
• pp.43-54
• /
• 2005

본 연구에서는3개소의 지중연속벽(D) 시험시공에 의해 유발된 지반의 변위에 대한 분석을 실시하였다. DW의 시공은 최근에 실시된 매립에 의해 압밀이 진행중인 압측성이 높은 해성점토층 및 풍화잔적토 지반에서 실시되었다. 수평변위의 계측결과는 DW시공에 의해 최대 293mm의 매우 큰 변위가 발생함을 보여주고 있는데, 이는 약 0.8$\%$ D(D=최대굴착고)에 해당되는 값이다. DW의 시공 도중 굴착면을 의도적으로 방치하는 경우, 지반 변위가 약 50-225$\%$ 증가하였다. DW 시공 이전에 해성점토층을 제트 그라우트로 보강하게 되면 지반변위가 매우 효과적으로 감소된 것으로 관측되었다. 본 연구에서 관측된 지표침하를 유사한 조건에서 실시된 DW 시공사례에서 측정된 지표침하의 양상과 간접 비교한 결과에 따르면, 해성짐토층에 DW을 시공하는 경우 최대 0.225$\%$ D의 지표침하가 발생하는 것으로 분석되었다.

• 한국지반공학회논문집
• /
• 제22권3호
• /
• pp.13-21
• /
• 2006

토목섬유를 토목공학에 적용한 이후 토목섬유의 손상에 대하여 많은 관심이 되어왔다. 이 논문에서는 시험시공을 3지점에서 수행했는데 목적은 연약한 점토지반상에서 보강재의 거동을 조사하고 매립시 최적의 시공방법론을 찾기위한 것이다. 이 시험시공에 사용된 폴리에스테르매트(인장강도 15톤)의 봉합부분이 원호활동 사면파괴로 인하여 파괴되었는데 이는 급격한 성토로 인해 과잉간극수압이 발생하여 하중이 증가했기 때문이다. 매트의 인장 파열이 진행되는 지반 거동 중 성토고로 유발될 수 있는 간극수압보다 큰 간극수압이 측정되었는데, 특히 지표하 5m 깊이에서는 장기간에 걸쳐 간극수압이 증가하였다. 이러한 결과를 이용하여 성토고와 연약점토의 융기거동의 관계에 대하여 검토하였다.