• Korean Journal of Child Studies
• /
• v.22 no.3
• /
• pp.137-150
• /
• 2001

In this cross-national analysis of commercials for young children, 58 commercials were from KBS 2 in S. Korea, 51 from Nickelodeon, USA, and 69 from CTV, Taiwan, totaling 178 commercials. Differences between countries were that foods and beverages were mainly advertised in S. Korean and Taiwanese while a full range of items were evenly displayed in American commercials, and American commercials used more ordinary people in casting. Fantastic and realistic atmospheres were typical of S. Korean, realistic and explanatory of American, and explanatory of Taiwanese commercials. The commercials rarely showed an aesthetic sense or creative thinking, and the use of abusive language and aggression was ubiquitous, while some deviant behavior was also portrayed. The commercials often failed to provide useful information, and they stimulated customers to have unrealistic expectations.

• Structural Engineering and Mechanics
• /
• v.28 no.5
• /
• pp.587-601
• /
• 2008

In this study, a numerical procedure based on the finite element method for materially and geometrically nonlinear analysis of reinforced and prestressed concrete slender columns with arbitrary section subjected to combined biaxial bending and axial load is developed. In order to overcome the low computer efficiency of the conventional section integration method in which the reinforced concrete section is divided into a large number of small areas, an efficient section integration method is used to determine the section tangent stiffness. In this method, the arbitrary shaped cross section is divided into several concrete trapezoids according to boundary vertices, and the contribution of each trapezoid to section stiffness is determined by integrating directly the trapezoid. The space frame flexural theory is utilized to derive the element tangent stiffness matrix. The nonlinear full-range member response is traced by an updated normal plane arc-length solution method. The analytical results agree well with the experimental ones.

• Journal of Environmental Science International
• /
• v.20 no.4
• /
• pp.427-434
• /
• 2011

This study characterized the full range of vegetation in a upland wetland (marshland) in Korea. Classified community types were used to describe vegetation at the marshland and adjacent areas. The communities contained 44 species of vascular plants and all species were identified into four plant community types. The Rhododendron yedoense f. poukhanense type and Lespedeza cyrtobotrya type had a high representation infacultative upland species (FU) and obligate upland species (OU), respectively. The monocot type was dominant in marshland by Miscanthuns saccharifloruc and contained 14 species. Together the three areas contained four species, with the strongest indicator species being Ranunculus acris var. nipponicus, Rhododendron yedoense f. poukhanense, Hemerocallis fulva, and Miscanthuns sinensis var. purpurascens. Shannon-Weaver index of diversity also varied among the community types (F = 18.9, df = 2), with the types FU having significantly higher value (3.467) than the others (1.125 for type FW and 1.239 for type OU).

• English Language & Literature Teaching
• /
• v.12 no.4
• /
• pp.139-157
• /
• 2006

As the Communicative Approach has become the norm in foreign language teaching, the objectives of teaching English in school have changed radically in Korea. The focus in high school English textbooks has shifted from mere mastery of structures to communicative proficiency. This paper will study five polysemous words which appear in twelve high school English textbooks used in Korea. The twelve text books are incorporated into a single corpus and analyzed to classify the usage of the selected words. Then the usage of each word was compared with that of three other corpora based sources: the BNC(British National Corpus) Sampler, ICE Singapore(International Corpus of English for Singapore) and Collins COBUILD learner's dictionary which is based on the corpus, "The Bank of English". The comparisons carried out as part of this study will demonstrate that Korean text books do not always supply the full range of meanings of polysemous words.

• Steel and Composite Structures
• /
• v.29 no.2
• /
• pp.161-173
• /
• 2018

Point bending is often used for cambering and curving structural steel girders. An analytical solution, applicable in the elasto-plastic range only, that relates applied loads to the desired curve was recently developed for inducing horizontal curves using four-point bending. This solution does not account for initial residual stresses and geometric imperfections built-in hot-rolled sections. This paper presents results from a full-scale test on a hot-rolled steel section curved using four-point bending. In parallel, a numerical analysis, accounting for both initial geometric imperfections and initial residual stresses, was carried out. The models were validated against the experimental results and a good agreement for lateral offset and for strain in the elasto-plastic and post-plastic ranges was achieved. The results show that the effect of initial residual stresses on deformation and strain is minimal. Finally, residual stresses due to cold bending calculated from the numerical analysis were assessed and a revised stress value for the service load design of the curved girder is proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.71-78
• /
• 1999

The application range of injection molded parts is expanding by the development of engineering plastics with good mechanical properties. Plastic gears are specially used as automotive parts due to an excellent performance in the characteristics of a strength vs. weight, and the study of injection molding process of plastic gear using Nylon66 is performed in this study. Filling, packing and cooling analyses were done by using the simulation software like Moldflow, and a mold was designed by following the simulation results. Pin-point gates with three points were taken to satisfy the design guides like a full-shot, and lower clamping force and uniform shrinkage. Characteristics of shrinkage of molded gear and temperature difference between cavity and core sides of a mold were shown.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.279-282
• /
• 2005

Recently, due to the launching of digital broadcasting service, a demand of PDP TV with large screen size is sharply rising. PDP power module is mainly divided into power factor correction (PFC) stage and sustaining power stage. Especially, sustaining power module has pulsating load characteristics. So, the hard switching at light load condition causes low efficiency and thermal problem. Therefore, a new power conversion circuit for sustaining power module of 60' PDP is proposed whose ZVS is obtained by additional ZVS tank. This paper presents properties of the proposed converter through mode analysis, numerical analysis. And a 900w prototype for sustaining power module of 60' PDP is produced to verify the analytic results. As an experimental results, ZVS is achieved from full load to 10% load variation and more than 92% of high efficiency is obtained at 10% load condition.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.118-123
• /
• 2001

The objectives of this research are to verify the structural stability and estimate the resisting performance of Stressed-Arch system during the construction process. Full scale models are taken to obtain the objective shape by the Dynamic Relaxation Method. As a result, it measured more strain than yielding strain at the extreme fiber of top chord member on the crown, but it is shown that members have the sufficiently compressive resisting performance as well as a considerable strain recovery capacity under unloading. Therefore, it is confirmed that Stressed-Arch system apparently have sufficient range of the structural capacity, but it is required that the elasto-plastic behavior of this system must be verified more detailed by numerical analysis and experiments.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.37-39
• /
• 1998

The hybrid step motor has found applications in a wide range of mechanical systems as a low cost, open-loop positioning device. The step motor provides good stiffness at rest against disturbing load influences, a combination of moderate speed fine resolution, high reliability and simplicity. In recent years, considerable competition has arisen over the technological issue of wheather the device should be applied as a 2-Phase or 5-Phase machine. In this paper, to compare two systems, we have atempted to derive the mathematical. model, and analysed operating detent torque with this model. The analysis shows that a fundamental component of the permeance distribution produces the average torque and that harmonic components produce the ripple torque.

• Wind and Structures
• /
• v.17 no.5
• /
• pp.553-564
• /
• 2013

By using the nonlinear aerostatic stability theory together with the method of mean wind decomposition, a method for nonlinear aerostatic stability analysis is proposed for long-span suspension bridges under yaw wind. A corresponding program is developed considering static wind load nonlinearity and structural nonlinearity. Taking a suspension bridge with three towers and double main spans as an example, the full range aerostatic instability is analyzed under wind at different attack angles and yaw angles. The results indicate that the lowest critical wind speed of aerostatic instability is gained when the initial yaw angle is greater than $0^{\circ}$, which suggests that perhaps yaw wind poses a disadvantage to the aerostatic stability of a long span suspension bridge. The results also show that the main span in upstream goes into instability first, and the reason for this phenomenon is discussed.