• 신재생에너지
• /
• 제4권3호
• /
• pp.23-35
• /
• 2008

In the present study, performances of fuel cell driven compound source hybrid heat pump system applied to a large community building are simulated. Among several renewable energy sources, ground, river, sea, and waste water sources are chosen as available alternative energies. The performance and energy cost are varied with the hybrid heat pump sources. The system design and operation process appropriate for the surrounding circumstance guarantee the high benefit of the heat pump system applied to a large community building. Th system is driven by fuel cell system instead of the late-night electricity due to the advantages of the low energy cost and waste heat with high temperature.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.99-105
• /
• 2007

Currently, BLDC fuel pump was applied on LPi vehicle using 3rd fuel supply system as liquified phase LPG injection method had already shown better performance than others. Its cost, however, is rather expensive because of drawbacks such as complicated structure, a fault of localization of system. In this work, demonstration system for a developed turbine type fuel pump to replace BLDC system was setup and investigated. This study results that fuel mass flow rate of turbine type pump and injection performance of injector were better compared to BLDC type. Comparing flow rate of summer LPG with that of winter LPG, the flow rate decreased about 25% using winter LPG. Performance applying turbine type LPi fuel pump to engine is confirmed.

• 한국가스학회지
• /
• 제12권2호
• /
• pp.12-17
• /
• 2008

강화되는 배출가스 규제에 대응하기 위한 대책으로 LPG 차량에 적용되고 있는 제3세대 LPG 연료공급방식인 LPLi(Liquid Phase LPG Injection)은 LPG 연료를 펌프를 이용해서 고압의 액상연료를 공급하는 것이 가장 핵심적인 기술이다. 그러나 LPG 연료의 경우 저점도, 저비등점의 물리적 특성을 갖는 가스연료로서 기존의 가솔린 또는 디젤용 펌프를 사용할 경우 성능 및 효율이 달라질 수 있다. 본 연구에서는 가솔린 연료 펌프의 임펠라 방식을 응용 변형시켜서 LPG연료용으로 개발된 펌프를 이용하여 다양한 온도와 연료조성 조건에서 초기토출성능 및 효율을 파악하고, 기존 펌프의 단점을 극복할 수 있는 펌프방식의 적용가능성 여부를 판단하고자 한다.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1496-1502
• /
• 2012

엔진에 장착된 자동차용 연료펌프는 외부 및 내부 로터로 구성되어 있으며, 내부 로터는 입구로부터 연료를 흡입하여 출구로 배출한다. 본 연구에서는 로터가 장착된 연료펌프의 성능을 평가하기 위해 해석 및 시험을 수행하였다. 입출구 포트 각도가 0, 15, $30^{\circ}$에서 컴퓨터 시뮬레이션을 통한 연료펌프의 유동 특성을 해석하였다. 가장 우수한 유동 특성을 가진 펌프를 결정한 후 진동 특성을 해석하였다. 그 결과 유량은 입출구 포트 각도가 $0^{\circ}$에서 191.0 LPH로 가장 우수하게 나타났으며, 진동은 0.866 $^m/s^2$으로 계산되었다. 진동 시험 결과를 통해 연구된 펌프가 기존의 펌프에 비해 작은 진동을 가지고 있음을 알 수 있었다. 그리고 두 펌프의 고유진동수들은 거의 일치하였다. 따라서 연구된 펌프의 성능이 우수하다는 것을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.107-112
• /
• 2011

FFV(Flexible Fuel Vehicle) is the vehicle that can be used liberally from gasoline to E100(Ethanol 100%) for fuel. Recently, interest in the bio-fuel is increased by the environmental factors like exhaustion of the fossil fuel and ruduction of greenhouse gases. For the reason, adopting of FFV is activated in the world including North and South America. In general, bio-ethanol has highly corrosive substance in compare with gasoline. In the part of fuel system, corrosion can make a safety problem in case of fuel leakage and engine starting problem. So the fuel system of FFV have to be made of high corrosion-resistant materials. This study examined the effect of bio-ethanol on the durability properties according to component materials in FFV fuel pump motor and regulator using the High Temperature Fuel Circulation Test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.759-763
• /
• 2004

High frequency noise of fuel pump has does claimed by user. But high frequency of fuel pump can't heat in the car. But this noise Is an offensive noise outside car. In this study is noise reduction used to mass law. Especially high frequency (for example BPF(blade pass frequency)) is influenced of this law. In detail used to transmission and add to mass according to mass law, reduced particular noise. As a result high frequency is down until can't perception.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.358-362
• /
• 2005

축추력의 효과적인 제어는 터보펌프 개발의 핵심 기술 중 하나이다. 현재 개발 중인 액체로켓엔진용 연료펌프의 안정성을 입증하기 위해 축추력 측정 장치를 개발하고 수류 시험을 실시하였다. 시험 결과, 연료펌프는 설계 유량에서 펌프 베어링의 축방향 하중 요구 조건을 만족하였다. 또한 이차 유로의 오리피스를 통해 연료펌프에 대한 축추력 제어가 가능한 것을 확인하였다.

• Tribology and Lubricants
• /
• 제29권2호
• /
• pp.111-116
• /
• 2013

This paper describes the adherence phenomenon, including the tribological characteristics, of a low-pressure fuel pump in a diesel engine for an excavator. Most fuel pumps of a diesel-engine excavator are of the fixed-quantity-gear type and have low pressure. However, the developed pumps develop problems in the pumping system owing to performance instability. Cavitation, which is the main obstacle to stable driving in the pump, occurs between an idle gear and the housing to produce a serious adherence problem. The present study not only examined how to suppress cavitation in a pump but also developed a simple method to improve pump performance through the early creation of a lubrication film with a phosphoric acid coating on the surface of the idle gear. The results showed that the coating successfully prevents breakage of the idle gear due to adherence.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1099-1102
• /
• 2017

액체로켓엔진용 연료펌프의 캐비테이션 시험 중 입출구 배관과 펌프 케이싱에서 계측된 고주파 신호를 분석하였다. 각각의 데이터의 RMS 값을 캐비테이션 수에 따라 표현하였다. 측정 결과는 산화제펌프의 결과와 비교하였으며, 캐비테이션 불안정성의 영향도 검토하였다. 산화제펌프와 연료펌프 고주파 신호 사이에 유사성이 확인되었다. 또한, 캐비테이션 불안정성은 연료펌프 출구 배관 압력섭동에 영향을 주었다.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.123-134
• /
• 2012

A typical cooling system of an engine relies on a water pump that circulates the coolant through the system. The pump is typically driven by the crankshaft through a mechanical link with engine starting. In order to reduce the friction and warm-up time of an engine, the clutch-type water pump (CWP) was applied in 2.0 liter diesel vehicle. The clutch-type water pump can force cooling water to supply into an engine by the operation of an electromagnetic clutch equipped as the inner part of pump system. The onset of CWP is decided by temperature of cooling water and engine oil. And, the control logic for an optimal operation of the clutch-type water pump was developed and applied in engine and vehicle tests. In this study, the warm-up time was measured with the conventional water pump and clutch-type water pump in engine tests. And the emission and the fuel consumption were evaluated under NEDC mode in vehicle tests. Also, tests were carried out for the various temperature conditions starting the operation of CWP. From the results of the study, the application of CWP can improve the fuel consumption and $CO_2$ reduction by about 3%.