• Women's Health Nursing
• /
• v.27 no.4
• /
• pp.318-325
• /
• 2021

Purpose: Although insulin is usually injected into the abdominal subcutaneous fat, in pregnancy women tend to avoid abdominal injections due to concern about fetal damage. Prior studies have been limited to only measuring skin-subcutaneous fat thickness (S-ScFT) at one site at specific pregnancy points. This study aimed to measure S-ScFT across several abdominal sites and over the gestational period in Korean pregnant women. This can identify which site would be relatively safe for subcutaneous injection during pregnancy. Methods: Healthy women over 24 weeks of pregnancy in Korea were invited to voluntarily participate in this descriptive study. For the 142 women, S-ScFT of 12 sites in the abdomen were measured by ultrasound, several times over the pregnancy. Each incidence was treated as a case and a total of 262 cases were analyzed. Results: The mean S-ScFT during pregnancy was 1.14±0.47 cm (1.25±0.54 cm at 24⁺⁰-27⁺⁶ weeks; 1.17±0.48 cm at 28⁺⁰-31⁺⁶ weeks; 1.09+0.40 cm at 32⁺⁰-35⁺⁶ weeks; and 1.06±0.47 cm at 36⁺⁰-40 weeks of pregnancy). Most S-ScFT were thicker than 10 mm. But S-ScFTs in the lateral abdomen and some sites were suboptimal (<6 mm), especially in the pre-pregnancy underweight body mass index group, who had a high rate of suboptimal thickness (27.1% overall and 33.9% in the lateral side). Conclusion: The whole abdomen seems to be appropriate for subcutaneous injection in most Korean women during pregnancy, with a 4 to 5-mm short needle. However, for the lateral abdomen, making the skin fold might be needed for fetal safety.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.18-28
• /
• 1998

A laboratory experiment was made of a control of temperature oscillation in Czochralski convection. Numerical computation was also made to delineate the control of temperature oscillation. The suppression of temperature oscillation was achieved by varying the rotation rate of crystal rod ($\Omega=\Omega_0(1+A sin 2{\pi}ft/t_p)$), where A denotes the amplitude of rotation rate and f the frequency factor. Based on the inherent dimesionless time period of temperature oscillation ($t_p$), the suppression rate of temperature oscillation was characterized by the mixed convection parameter ($0.217{\leq}Ra/PrRe^2{\leq}1.658$). The optimal values of A and f were also scrutinized. To understand the suppression mechanism of temperature oscillation, the controls of isotherm($\theta$) and equi-vorticity($\omega$) were investigated.

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.270-276
• /
• 2018

Background: Notoginsenoside Ft1 is a promising potential candidate for cardiovascular and cancer disease therapy owing to its positive pharmacological activities. However, the yield of Ft1 is ultralow utilizing reported methods. Herein, an acid hydrolyzing strategy was implemented in the acquirement of rare notoginsenoside Ft1. Methods: Chemical profiles were identified by ultraperformance liquid chromatography coupled with quadruple-time-of-flight and electrospray ionization mass spectrometry (UPLC-Q/TOF-ESI-MS). The acid hydrolyzing dynamic changes of chemical compositions and the possible transformation pathways of saponins were monitored by ultrahigh-performance LC coupled with tandem MS (UHPLC-MS/ MS). Results and conclusion: Notoginsenoside Ft1 was epimerized from notoginsenoside ST4, which was generated through cleaving the carbohydrate side chains at C-20 of notoginsenosides Fa and Fc, and vinaginsenoside R7, and further converted to other compounds via hydroxylation at C-25 or hydrolysis of the carbohydrate side chains at C-3 under the acid conditions. High temperature contributed to the hydroxylation reaction at C-25 and 25% acetic acid concentration was conducive to the preparation of notoginsenoside Ft1. C-20 epimers of notoginsenoside Ft1 and ST4 were successfully separated utilizing solvent method of acetic acid solution. The theoretical preparation yield rate of notoginsenoside Ft1 was about 1.8%, which would be beneficial to further study on its bioactivities and clinical application.

• The Journal of the Korean dental association
• /
• v.17 no.2 s.117
• /
• pp.141-145
• /
• 1979

The author, through oral examination, had surveyed the caries experienced teeth in 250 Korean mental Disorders(153 males and 97 fameles) who took it a rule consume a Vegetable diet and had litte chance to Consume refimed Corbohydrates, unlike the Common populars. DMF rate DMFT rate index DT rate MT rate and FT rate had been calculated and Compared with Common Popular's in same ages group. Following are the obtained results 1. In the mental Disorders, Caries experience rate was 52.19% 2. D.M.F. rate and index were lower in the females than in the males 3. The Caries experience rate in the mental Disorders was lower than in the Common Populars 4. In the mental Disorders the F.T. rate was higher in females than in males D.T. rate higher in males than in females and MT rate, lower in males than in females 5. In generally D.T. rate in the mental Disorders was lower than in Controls, M.T. rate resembled as Controls and F.T. rate higher

• The Journal of the Korean dental association
• /
• v.16 no.10 s.113
• /
• pp.791-794
• /
• 1978

The authors selected socio-geographically different sample areas. The dental caries on the deciduous teeth was observed and evaluated in each sample area. And then, dft rate, dft index, dt rate and ft rate were calculated and compared. The obtained results were as follows; 1. The dft rate of the deciduous teeth was 33.28% in the metropolitan area, 19.78% in city area, 18.21% in town area, 13.48% in field area, 15.26% in coastal area, 22.11% in mountain area, and 20.37% in hot spring area. 2. The dft index of the deciduous teeth was 4.51 in metropolitan area, 2.78 in city area, 2.59 in town area, 1.95 in field area, 2.30 in coastal area, 3.03 in mountain area, and 2.85 in hot spring area. 3. The dt rate of the deciduous teeth was 66.51% in metropolitan area, 95.38% in field area, 98.94% in hot spring area, and 100% in the other areas. 4. The ft rate of the deciduous teeth was 33.48% in metropolitan area, 4.61% in field area, 10.50% in hot spring area, and 0.00% in the other areas. 6. We could not find that the some dental cares for the dental caries on the deciduous teeth of Korean children were supplied in metropolitan area, and the track of dental cares was appreciated in the field area, but no trace was indentified in the coastal, mountain, city, and town areas.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.615-623
• /
• 2006

The purpose of this study was to evaluate the specificity, sensitivity, and diagnostic power of caries activity test using LED fluorescence. The subjects of this study were 55 children of $6{\sim}7$ years old. LED light were irradiated to labial or buccal surface of all teeth. Fluorescence from initial carious lesion of teeth illuminated by an LED light was observed through barrier filter and the number of teeth showing lesion, size and position of lesion were counted. Streptococcus mutans colony counting and dDfFtT rate test were also done and their correlation was compared. And then specificity, sensitivity, diagnostic power of optical caries activity test using LED light were evaluated. 1. There was positive $correlation({\gamma}=0.43)$ between LED fluorescence test and Streptococcus mutans count(P<0.05). 2. When visual examination was defined to standard testing method, the specificity, sensitivity, diagnostic power of LED fluorescence test were 100%, 76.1%, and 100%. 3. When dDfFtT rate was defined to standard testing method, the specificity, sensitivity, diagnostic power of LED fluorescence test were 88.9%, 47.8%, and 95.7%. 4. When S. mutans colony counting was defined to standard testing method, the specificity, sensitivity, diagnostic power of LED fluorescence test were 100%, 58.7%, and 100%. Considering the above results, optical caries activity test using LED light could be regarded as a practical method because of its close relationship with microbiological caries activity test.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.664-671
• /
• 2002

To investigate the effects of different type of dietary fat on survival metabolism of fasting rats, one group rats (FO) were fasted, another one group rats (BM) were fed normal diet and the others were fed only one of the following fat diets: beef tallow (FT), corn oil (FC), and perilla oil (FP) of 11.4g/kg respectively. Most FO group rats survived for 6 days and large part of the only-fat-diet groups rats survived for 16 days. Body weights of all rats in fasting and only-fat-groups, measured just one day prior to death owing to fasting or caloric malnutrition, decreased by 24.5%~25% only-fat to fasting rat somewhat extended the survival time but the specific properties of dietary fat types had no remarkably differential effect on survival time and body weight gain rate. The features of liver and kidney weight gain rate of all rats in fasting and only-fat-diet groups were similar to those of body weight gain rate. In FO groups blood levels of total-cholesterol, triglyceride, and glucose markedly reduced whereas GPT activities and BUN levels considerably increased as compared to BM group. However the types of dietary fat perse did not affect blood total cholesterol, triglyceride, glucose, BUN levels, and GPT activities in early stage of fasting in FC and FP group. GPT activities in rats of FP group just prior to death of starvation seemed to be affected by the dietary fat types. The results showed that only-fat-feeding to fasting rats somewhat extended survival time but the types of dietary fat had no remarkably differential effect on survival time and metabolism of fasting rats.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.671-679
• /
• 2004

The purpose of this study was to develop a practical caries activity test by fluorescence using laser, plasma light and halogen light. The subjects of study were 45 children of 7-8 years old Argon laser, plasma light and halogen light were irradiated to buccal or labial surface of all teeth. Fluorescence of initial carious lesion from teeth was observed through barrier filter and the number of teeth showing lesion was counted. Visual examination for the dDfFtT, mutans streptococci screening test and Lactobacilli colony counting were also done. Data analysis was accomplished by Axelsson's method. The result from the present study can be summarized as follows. 1. Laser, plasma light and halogen light could detect the initial carious lesions better than visual examination(p<0.05). 2. There was positive correlation between laser(r=0.42), plasma light(r=0.41), halogen light(r=0.39) and dBfFtT rate(p<0.01). 3. The specificity sensitivity and predictive value was showed highest value in laser, but was showed favorable value in plasma light and halogen light. In regard to above results, laser, plasma light and halogen light all considered to be reliable method for determining individual caries activity. And they were also considered to be practical method because it would be simple, inexpensive, and time saving method.

• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.697-702
• /
• 2003

FT-IR and thermograph were used to investigate the infrared radiation characteristics of $SiO_2$film made by the sol-gel method. FT-IR spectrum of the $SiO_2$film showed high infrared absorption by Si-O-Si vibration at 1220, 1080, 800 and cm$460^{-1}$ The infrared absorption and radiation wavelength ranges of the $SiO_2$film measured by the integration method coincided with the reflection method, and the infrared emissivity was 0.65, equally. Depending on the bonding of elements, the infrared emissivity was high in the wavelength range where the infrared absorption rate was high, that follows the Kirchhoff's law. The emissivity showed the highest value in the wavelength range between $8∼10\mu\textrm{m}$. $SiO_2$film was considered as an efficient materials for infrared radiator at temperature below 10$0^{\circ}C$. The heat radiation temperature was $117^{\circ}C$ for the aluminum plate, but $146^{\circ}C$ for the $SiO_2$film after 7 minutes heat absorption, consiquently, $29^{\circ}C$ higher than the former.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.843-851
• /
• 2015

Among various ammonium salts and metal ammine chlorides used as solid materials for the sources of ammonia with solid SCR for lean NOx reduction, magnesium ammine chloride was taken up for study in this paper because of its ease of handling and safety. Lab-scale synthetic method of magnesium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%). To understand material characteristics for lab-made magnesium ammine chloride, DA, IC, FT-IR, XRD and SDT analyses were performed using the published data available in literature. From the analytical results, the water content in the lab-made magnesium ammine chloride can be determined. A new test procedure for water removal was proposed, by which the adsorption rate of lab-made sample was found to be approximately 100%.