• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.2
• /
• pp.186-189
• /
• 1993

The effect of soybean oil on frying time and number of frying treatment on quality of Yu-kwa (Korean traditional rice cookie) were examined. As the frying time increased, acid value and POV were increased from 0.08 to 0.23 and 1.78, respectively. But the quality of Yu-kwa was not influenced by the frying time. And as the frying time increased, unsaturated fatty acid (oleic and linoleic acid) was decreased, while saturated fatty acid (palmitic acid) was increased. The color was drastically changed on frying oil which showed a dark brown color, but there was no difference in Yu-kwa. As the frying time increased, acceptability was decreased on sensory evaluation, but significant difference among samples tested within significant level 5 % was not revealed.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.374-387
• /
• 1973

This work was carried out to investigate the changes of chemical and physical properties of frying oil, when it was used many times continuously without adding new oil. Four kinds of frying oil (soybean oil, rapeseed oil, shortening and crude lard) and slices of potato and Aji (kind of fish) were used in the experiment under the condition of home cooking. Obtained results were as in the followings. 1. Acid values and peroxide values of each frying oil were under the safety level (A. V = 1.5, Po. V = 50) except crude lard, when frying works were continuously repeated five times for 50 days. 2. Changes of saponification values of each frying oil showed a decreasing tendency except the crude lard. But in cases, stickiness or clothing of oil were not seen in frying even at the five times frying. 3. Changes of optical density of each frying oil showed a decreasing tendency in all cases, according to the times of frying, especially at the first time frying. 4. Maximum heights of the shamp of each frying oil and their shampholding activites when heated, were slowly increased according to the times of frying. 5. Without concerning the cooking condition (kinds of oil, cooking material and repeating times of frying) decrement of oil in once frying was almost exactly 20g per 150g. 6. Decrements of cooking material in all cases of frying showed almost constant values, potato to be 40% and Aji 20%. 7. Differences of smoke point between new and old oil (frying repeated 5 times) showed also almost constant values. Liquid oil (soybean oil and rapeseed oil) showed number (6-$10^{\circ}C$), on the contrally solid oil (shortening and crude lard) a high number (10-$25^{\circ}C$). 8. Results of public tastic for the frying products were almost good even in that of a low five times frying, but the products, of third time frying with crude lard were expressed as disagreeable.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.46-53
• /
• 2020

Carrots were deep fat fried with sunflower oil (SO), palm oil (PO), and a blend of palm and sunflower oils (PSO with PO:SO as 2:8 or 4:6) at different temperatures (180 and 190℃) and lengths of time (0.5 to 2.5 min). The quality of deep fat fried carrots was determined by the moisture and fat content, color, conjugated dienoic acid (CDA), hydroperoxide, p-anisidine value, and fatty acid composition. The moisture content of fried carrots decreased with increasing frying time, while the fat content increased. The CDA and p-anisidine values of carrots fried with SO were higher than those fried with PO because of greater unsaturated fatty acids content in SO. PSO was a better choice than SO or PO for deep fat frying carrots in the aspects of oxidative stability and ratio of unsaturated to saturated fatty acids. These results indicate that the quality of deep fat fried carrots depends on the type of oil and frying temperature used, as well as the length of time.

• Korean Journal of Human Ecology
• /
• v.22 no.3
• /
• pp.485-492
• /
• 2013

The temperature changes of dumpling(mandu) during cooking process were examined and the effects of time-temperature and/or time-size interactions on internal temperature were studied. Mandu was purchased from local markets and classified by its weight(small, medium, and large). Boiling, steaming, pan frying, and deep fat frying were adopted. Internal temperature was measured with a food thermometer in every one minute. The internal temperature of mandu increased over time in every cooking process(p<0.05). After three minutes the internal temperature of mandu in boiling, pan frying, and deep fat frying reached over at $74^{\circ}C$, which is high enough temperature to kill the harmful bacteria, but not in steaming. The internal temperature of mandu was significantly affected by cooking time, size, and both in boiling, steaming, and deep fat frying(p<0.05). There were significant differences between the internal and surface temperatures of mandu in the cooking processes except pan frying in three minutes(p<0.05). The results of this study indicate three minutes' cooking of the mandu by boiling, pan frying, and deep fat frying is safe enough to eat. However, longer steaming time is needed in order to reach safe temperature. This study also indicates the cooking time and size of mandu appear to be major factors in determining the internal temperature achieved at $74^{\circ}C$. More research is needed to check time to reach a safe temperature in the cooking process of mandu by steaming.

• Korean Journal of Agricultural Science
• /
• v.42 no.4
• /
• pp.439-446
• /
• 2015

Kimbugak is one of Korea's traditional snacks made of laver. This study was conducted to investigate the physical drying and frying characteristics of kimbugaks made by a pasting & garnishing machine. The drying and frying characteristics should be analyzed to develop a continuous operation system for manufacturing kimbugak because kimbugak has a high moisture content after pasting process. Materials for pasting and garnishing on laver were rice gruel and sesame. The aluminum shelf with square hole was selected as a drying shelf. The recommended size of the square hole type was $1.5mm{\times}1.5mm$ because characteristics of deformation and easy separation from the shelf were excellent at the hole size. The drying time of 2 hours was also recommended with the drying temperature of $70^{\circ}C$ based on the test results such as dried condition (good), moisture conten t (3.7%), deformation (12.1 mm), and shrinkage rate (19.8%). As the frying conditions for dried kimbugaks, recommended oil temperature and frying time were $170^{\circ}C$, 15 seconds, respectively when corn oil was used. In the case of frying for undried kimbugaks, recommended oil temperature and frying time were $210^{\circ}C$, 2 - 3 minutes, respectively for improvement of work efficiency.

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.215-220
• /
• 1990

Effects of frying conditions on cooking properties of ramyon (deep-fried instant noodle) were investigated. The moisture content, which was decreased as the frying temperature $(140-160^{\circ}C)$ and time (30-70 sec) increased, was negatively correlated with lipid content. The weight gain was higher than volume gain at a given frying condition Weight or volume gain rate constant for ramyons fried at $140^{\circ}\;and\;150^{\circ}C$ increased with increase of frying time, but that for ramyon fried at $140^{\circ}\;and\;150^{\circ}C$ increased with increase of frying time, but that for ramyon fried at $160^{\circ}C$ showed opposite trend. The initial cooking rate decreased as the frying time was increased in all cases and as the frying temperature was elevated at a given frying time.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.213-221
• /
• 1981

This theiss deals with the effects of addition of silicone oil to the polymerization and oxidation of frying oil in the practical deep fat frying process. The measurement of frying oil stability was carried out under various silicone oil content and compared with controlled frying process. In controlled frying process A.V., C.O.V., TBA, and contents of petroleumether insoluble fatty acids were increased as time was increased. It means thermal oxidized polymerization and hydrolysis of frying oil was occurred. When silicone oil was added to frying oil, it's thermal stability was better than that of the controlled oil and the degree of thermal stability was changed according to the contents of silicone oil. We obtained the highest degree of thermal stability when silicone oil was added 1ppm.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.637-643
• /
• 1988

The useful life of frying oil was increased by treating the frying oil with a composited powder comprising water, citric acid and porous rhyolite carrier. The color darkening and foaming tendency of the oil during frying operation was apparently retarded. Increase rates of polar lipid components, dielectric constant and formation of the conjugated dienes and trienes of the used frying oil were reduced to two thirds of the oil without treatment during 84 hr frying operation. Iodine value and polyenoic index was also much less decreased by treatment. The treatment, however, have no significant effect to inhibit the decrease of smoke point and the increase of viscosity.

• Journal of the Korean Home Economics Association
• /
• v.24 no.4
• /
• pp.75-84
• /
• 1986

The followings are the results of the study on decomposition of oil during the process of frying hot-dogs with soybean oil. First, the oil was heated repeatedly for six days, four hours two session per day. Then the oil was observed when heated under identical condition except for the exclusion of the frying ingredients. And the oil itself was heated constantly for a period of 48 hours. 1. The AV and Carbonyl Value of all frying oils increased with each use (but the oil in which frying ingredients with all other oils) 2. All frying oils showed a tendency to increase initially, then decrease their POV and TBA Number during their heating process. 3. The IV of all oils showed a slight decrease except for oil with frying ingredients added, with showed a substantial decrease. 4. Oil with frying ingredients showed a substantial increase in its oxidized fatty acid level, and others showed a tendency to increase according to the frying time. Decomposition of soybe an oil during the process of frying hot-dogs was studied. Three treatment was performed first, the oil was heated (with hot-dogs) repeatedly four hours in each session, two sessions per day for six days. Second, the oil was heated without hot-dogs under identical condition, Third, the oil was heated constantly for 48 hours.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.157-160
• /
• 1991

Copper constantan thermocouples connecting to a recording potentiometer were inserted at the center of the patties and the samples were fried. In general, the internal temperature of the patty samples increased approximately $11.1^{\circ}C$ after the samples were removed from the fryer. The desired internal temperature and maximum internal end-point temperature, at different frying temperatures, can be obtained by adjusting the frying time. The yields of the patties decreased as maximum internal end-point temperature increased or as frying time increased. The internal temperature and maximum internal end-point temperature of the patty samples at three frying temperatures were predicted using polynominal regression of a third-order model with one independent variable, frying time. Polynominal regression of a second-order model with maximum internal end-point temperature as the independent variable was used to predict frying yields at three frying temperatures.