• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.122-129
• /
• 2008

본 논문은 실내에 잔존하는 직경 1[${\mu}m$] 이하의 미세먼지들을 집진하기 위하여 전기집진기를 설계하였으며, 이때 집진 효율의 극대화를 위하여 전계와 동시에 자계를 수직 및 수평으로 배치함에 따른 실험실 공기중에 포함된 미세먼지의 집진특성에 대하여 논하였다. 전계에 수평으로 자계를 인가한 경우는 자계의 유무 및 자석의 수량에 관계없이 집진효율이 거의 일정하게 나타났으며, 자석을 수평으로 배치하여 전계에 수직으로 인가한 경우는 비자화 페라이트 막대를 부착한 경우보다 약 5[%] 이상 집진효율이 향상되었다. 또한, 자계를 전계에 수직으로 인가하는 방법에 있어서, 자석을 접지전극의 가운데 정렬한 경우는 인가전압 5[kV]에서의 집진효율이 $17{\sim}32[%]$로서 자석을 앞쪽에 설치한 경우와 유사하였으며, 지그재그 및 안쪽 끝에 정렬시킨 경우는 집진효율이 $17{\sim}38[%]$로서 향상되었으며, 특히 0.7 및 1[${\mu}m$]의 굵은 입자들에 대한 집진특성이 양호하였다. 따라서, 전기집진기의 집진특성을 향상시키기 위해서는 자계를 전계에 수직으로 접지전극의 중간 또는 지그재그 식으로 배치하는 것이 가장 적절한 것으로 판단된다.

• 동의신경정신과학회지
• /
• 제18권1호
• /
• pp.37-61
• /
• 2007

Objective : By examining EEG status in Korean Traditional Medicine (KTM) from the viewpoint of 'form-qi theory(形氣論)', We wish to prepare for the fundamentals of applicability of KTM diagnoses to EEG. In addition, through reinterpretation of existing Western Medicine reports from the viewpoint of KTM, We tried to find out interrelationship between them. Method : In this paper, a methodology applicable to KTM diagnoses of EEG is presented from the EEG features in waveform characteristics, personalized diversity, and cognitive activity reflection. Results : Frequency bands are assigned to corresponding one of the eight trigrams in terms of yin/yang balance, which is analogous with EEG spectrum analysis mostly used in EEG quantification. The amplitude ratio of each EEG for each frequency band gives meaningful index numbers which can be used in EEG data interpretation, and every index number is named after the sixty four hexagrams. These approaches are adopted through both '4-band classification system and '6-band classification system', and applied to pre-existing reported EEG data obtained from normal adults. These analyses show that changes and distribution pattern in the index numbers are observed as a whole on both left-right line and front-back line connecting EEG measurement cephalic electrodes. And differences in distribution pattern of three index numbers deduced from '6-band classification system' are discussed according to constitution. Conclusion : The index numbers introduced here, which are the spectral power ratio for each EEG, are based on KTM yin/yang balance. These index numbers vary according to cephalic location, so its application in terms of traditional meridian theory is strongly expected. The index number distribution also shows different patterns according to constitution.

• 한국추진공학회지
• /
• 제19권4호
• /
• pp.8-14
• /
• 2015

Purdue 대학교의 Ismailov 등이 수행한 closed-type 스월 인젝터의 동특성에 대한 모델링 및 계산 결과를 실험을 통해 확인하고자 하는 과정의 일환으로 수행된 연구이다. Closed-type 스월 인젝터의 스월 챔버의 길이와 지름의 영향이 인젝터의 동특성에 미치는 영향을 관찰하고자 스월 챔버의 길이와 지름을 변화시킬 수 있는 인젝터를 제작하였다. 이러한 과정에서 closed-type 스월 인젝터의 동특성에 대한 실험을 진행하기에 앞서서 정적인 분무 특성을 확인하였다. 인젝터 전단에 설치된 유량계를 통하여 유량을 확인하였으며, Lefebvre의 방식에 따라 closed-type 스월 인젝터의 오리피스에 전극을 설치하여 매니폴드 압력에 따른 액막 두께의 변화를 측정하였다. 또한 압력별로 촬영된 순간적인 분무 사진을 통하여 매니폴드 압력에 따른 분사각과 분열길이의 변화를 관찰하였다.

• 조명전기설비학회논문지
• /
• 제27권2호
• /
• pp.54-61
• /
• 2013

This paper presents transient response behavior and frequency-dependent ground impedance of a single carbon ground electrode. The ground impedance of the carbon ground electrode was measured as a function of frequency of injected currents and simulated by using the distributed parameter circuit model with due regard to the frequency-dependent soil parameters, and the transient response behavior of the carbon ground electrode against impulse currents were investigated. As a consequence, the frequency-dependent ground impedance of the carbon ground electrode showed the capacitive behavior, that is, the ground impedance decreases with increasing the frequency of injected currents and lowers at the fast front time of impulse current. It was found that the carbon ground electrode is effective in grounding system for lightning protection. The ground impedance simulated with due regard to the frequency-dependent soil parameters was in good agreement with the measured data. The adequacy of the simulation technique and the distributed parameter circuit model for the carbon ground electrode was verified. It is expected that the simulation methodology, which analyzes the frequency-dependent ground impedance of the carbon ground electrode proposed in this work, can be used in the design of a grounding system for protection against lightning.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.188.1-188.1
• /
• 2014

Aluminum is widely used as a material for electrode on silicon based devices. Especially, aluminum films are used as backside and front-side electrodes in silicon quantum dot (QD) solar cells. In this point, the diffusion of aluminum is very important for the enhancement of power conversion efficiency by improvement of contact property. Aluminum was deposited on a Si (100) wafer and a Si QD layer by ion beam sputter system with a DC ion gun. The Si QD layer was fabricated by $1100^{\circ}C$ annealing of the $SiO_2/SiO_1$ multilayer film grown by ion beam sputtering deposition. Cs ion beam with a low energy and a grazing incidence angle was used in SIMS depth profiling analysis to obtain high depth resolution. Diffusion behavior of aluminum in the Al/Si and Al/Si QD interfaces was investigated by secondary ion mass spectrometry (SIMS) as a function of heat treatment temperature. It was found that aluminum is diffused into Si substrate at $450^{\circ}C$. In this presentation, the effect of heat treatment temperature and Si nitride diffusion barrier on the diffusion of Al will be discussed.

• 센서학회지
• /
• 제23권2호
• /
• pp.114-121
• /
• 2014

We report a polysilicon active area membrane field effect transistor (PSAFET) pressure sensor for low stress deflection of membrane. The PSAFET was produced in conventional FET semiconductor fabrication and backside wet etching. The PSAFET located at the front side measured pressure change using 300 nm thin-nitride membrane when a membrane was slightly strained by the small deflection of membrane shape from backside with any physical force. The PSAFET showed high sensitivity around threshold voltage, because threshold voltage variation was composed of fractional function form in sensitivity equation of current variation. When gate voltage was biased close to threshold voltage, a fractional function form had infinite value at $V_{tn}$, which increased the current variation of sensitivity. Threshold voltage effect was dominant right after the PSAFET was turned on. Narrow transistor channel established by small current flow was choked because electron could barely cross drain-source electrodes. When gate voltage was far from threshold voltage, threshold voltage effect converged to zero in fractional form of threshold voltage variations and drain current change was mostly determined by mobility changes. As the PSAFET fabrication was compatible with a polysilicon FET in CMOS fabrication, it could be adapted in low pressure sensor and bio molecular sensor.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.105-110
• /
• 2011

The doping procedure in crystalline silicon solar cell fabrication usually contains oxygen injection during drive-in process and removal of phosphorous silicate glass(PSG). In this paper, we studied the effect of oxygen injection and PSG on conversion efficiency of solar cell. The mono crystalline silicon wafers with $156{\times}156mm^2$, $200{\mu}m$, $0.5-3.0{\Omega}{\cdot}cm$ and p-type were used. After etching $7{\mu}m$ of the surface to form the pyramidal structure, the P(phosphorous) was injected into silicon wafer using diffusion furnace to make the emitter layer. After then, the silicon nitride was deposited by the PECVD with 80 nm thickness and 2.1 refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$880^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Solar cells with four different types were fabricated with/without oxygen injection and PSG removal. Solar cell that injected oxygen during the drive-in process and removed PSG after doping process showed the 17.9 % conversion efficiency which is best in this study. This solar cells showed $35.5mA/cm^2$ of the current density, 632 mV of the open circuit voltage and 79.5 % of the fill factor.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.51-55
• /
• 2011

In this paper, the optimized doping condition of crystalline silicon solar cells with 156 ${\times}$ 156 mm2 area was studied. To optimize the drive-in condition in the doping process, the other conditions except drive-in temperature and time were fixed. After etching 7 ${\mu}m$ of the surface to form the pyramidal structure, the silicon nitride deposited by the PECVD had 75~80 nm thickness and 2 to 2.1 for a refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in $400-425-450-550-850^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Drive-in temperature was changed in range of $828^{\circ}C$ to $860^{\circ}C$ and time was from 3 min to 40 min. The sheet resistance of wafer was fixed to avoid its effect on solar cell. The solar cell fabricated with various conditions showed the similar conversion efficiency of 17.4%. This experimental result showed the drive-in temperatures and times little influence on solar cell characteristics.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.37-43
• /
• 2011

In this paper, the optimized doping condition of crystalline silicon solar cells with $156{\times}156\;mm^2$ area was studied. To optimize the drive-in temperature in the doping process, the other conditions except variable drive-in temperature were fixed. These conditions were obtained in previous studies. After etching$7\;{\mu}m$ of the surface to form the pyramidal structure, the silicon nitride deposited by the PECVD had 75~80nm thickness and 2 to 2.1 for a refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$850^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Drive-in temperature was changed in range of $830^{\circ}C$ to $890^{\circ}C$to obtain the sheet resistance $30{\sim}70\;{\Omega}/{\box}$ with $10\;\Omega}/{\box}$ intervals. Solar cell made in $890^{\circ}C$ as the drive-in temperature revealed 17.1% conversion efficiency which is best in this study. This solar cells showed $34.4\;mA/cm^2$ of the current density, 627 mV of the open circuit voltage and 79.3% of the fill factor.

• Physical Therapy Rehabilitation Science
• /
• 제4권1호
• /
• pp.44-48
• /
• 2015

Objective: The purpose of this study was to investigate the relationship between anticipatory postural adjustment (APA), single task, dual tasks and physical performances. The trunk muscles of APA consist of bilateral erector spinae (ES) and bilateral internal oblique (IO) adnominal muscles, during rapid stepping with the affected or unaffected leg in a sitting posture. Design: Cross-sectional study. Methods: In patients with chronic stroke, electrodes of surface electromyography (EMG) were attached on the bilateral erector spinae (ES), bilateral internal oblique adnominal (IO), and bilateral rectus femoris (RF) muscles. RF acts as the prime mover. The stroke patients performed hip flexion until $20^{\circ}$ as fast as possible at each leg in a sitting posture according to a visual cue. The visual cue unexpectedly appeared on monitor in front of the stroke patient. The single task was the Timed Up and Go (TUG) test. The dual tasks were the TUGconitive, which increased cognitive capacity, and the TUGmanual task, which had an external focus. Results: All EMG data showed earlier onset latency before the prime mover. In affected leg raising, the onset time of unaffected ES muscle of the stroke patients was correlated with the single and dual tasks (p<0.05). In unaffected leg raising, the onset time of the affected IO muscle was related to all the tasks (p<0.05). Gait speed showed a relationship with the unaffected ES muscle only. Conclusions: The trunk muscles of the bilateral ES and bilateral IO play an important role in APA. The single and dual tasks using TUG test were correlated with the APA s of ES and IO muscles. Dual task by the TUG test is a good measuring tool for reflecting the real life in patients with chronic stroke.