• 천문학회지
• /
• 제52권2호
• /
• pp.49-55
• /
• 2019

The New Vacuum Solar Telescope (NVST) is the largest solar telescope in China. When using CCDs for imaging, equal-thickness fringes caused by thin-film interference can occur. Such fringes reduce the quality of NVST data but cannot be removed using standard flat fielding. In this paper, a correction method based on multi-scale decomposition and adaptive partitioning is proposed. The original image is decomposed into several sub-scales by multi-scale decomposition. The region containing fringes is found and divided by an adaptive partitioning method. The interference fringes are then filtered by a frequency-domain Gaussian filter on every partitioned image. Our analysis shows that this method can effectively remove the interference fringes from a solar image while preserving useful information.

• 한국광학회지
• /
• 제19권4호
• /
• pp.302-309
• /
• 2008

컴퓨터 전산모의와 회전자를 이용한 실험을 통하여 회전변위에 따른 반복사인격자 한 쌍이 만드는 무아레 무늬의 변화를 세밀하게 조사하여 반복사인격자가 겹쳐서 동시에 생기는 두 가지의 서로 다른 무아레 무늬를 사용하는 작은 회전변위를 측정하는 가시적 방법을 보여준다. 이 무아레 무늬는12도 이상의 큰 각도 측정에 유용한 장주기의 넓고 긴 직선무늬와 12도 이하의 작은 각도 측정에 유리한 좁고 짧은 복잡한 직선무늬로 이루어져 있다. 그리고 무아레 무늬의 회전방향에 따라 회전변위의 회전방향도 동시에 가시적으로 판별할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.127-133
• /
• 2001

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and unsymmetrical in experimental image. Hence it is difficult to measure fringe order accurately at a data point by visual observation. In this study, the method of fringe sharpening, which can extract sharpened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photoelastic fringe patterns are simulated and their image are processed to yield sharpened lines. The method is than applied to general problem such as image of a circular disk compressed by concentrated loads and a cylinder subjected to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1593-1597
• /
• 2009

A biosensor has been developed based on induced wavelength shifts in the Fabry-Perot fringes in the visible reflection spectrum of appropriately derivatized thin films of porous silicon semiconductors. Porous silicon (PSi) was generated by an electrochemical etching of silicon wafer using two electrode configurations in aqueous ethanolic HF solution. Porous silicon displayed Fabry-Perot fringe patterns whose reflection maxima varied spatially across the porous silicon. The sensor system studied consisted of a mono layer of porous silicon modified with Protein A. The system was probed with various fragments of an aqueous Human Immunoglobin G (Ig G) analyte. The sensor operated by measurement of the Fabry-Perot fringes in the white light reflection spectrum from the porous silicon layer. Molecular binding was detected as a shift in wavelength of these fringes.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.19-25
• /
• 1995

Presently, along with the advance of high-technology, the precise measurement of linear displacement has become a staple requirement, and consequently the high resolution with submicron order has also been required in precise positioning and carriaging. In this paper, we advance a propose on a new type of laser encoder based on the principle of phase analysis of the moire fringes from superimposed two gratings. The phase angle as an information of displacement can be accurately calculated by detecting the change in brighness at four points of the fringes. The actual application of four point method to the moire fringes is performed thru microcomputer for general purpose, and the measuring procedure is also studied in this research. As an experimental result, in the case of using 20 .mu. m-pitch gratings, it is validated that this method has the resolution of 0.01 .mu. m and the accuracy of .+-. 0.15 .mu. m over the setting range of 100mm.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.220-230
• /
• 1993

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and asymmetrical in experimental images. Hence, it is difficult to measure fringe order accurately at a data point by visual observation. In this study, a method of fringe sharpening, which can extract shapened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photelastic fringe patterns are simulated and their images are processed to yield sharpened lines. The method is then applied to general problems such as images of a circular disk compressed by diametrically concentrated loads and a circular cylinder sybject to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.276-277
• /
• 2003

계측분야에서 물체의 변형정도를 알아내는 광학적인 방법으로 물체에 격자를 부착하여 격자의 변위에 의한 무아레 무늬(moir fringes)를 이용하여 물체의 변형정도를 알아내는 방법이 있다. 최근에 본 그룹에서 물체의 변형정도를 피치간격으로 측정할 수 있고, 한 피치 내의 세밀한 부분은 유사한 두 개의 격자가 겹쳐서 형성되는 버니어 무아레 무늬를 이용하여 세부적인 변위 정도를 알아낼 수 있는 방법을 제안하였다. (중략)

• 비파괴검사학회지
• /
• 제15권2호
• /
• pp.386-394
• /
• 1995

시편의 미소 변형을 측정하는 Moire법의 한 응용 방법인 미스얼라이먼트법을 이용하여 발생된 화상을 푸리에 변환에 의하여, 주파수 함수로 전환시킨 후 표준화 이론을 적용하여 시편의 변형을 Moire 무늬로 설명하고, 이를 뒷받침하는 식들을 유도하였다. 특히, 미스얼라인먼트법에서 발생되는 무늬의 회전 현상이나 무의 개수의 증가를 설명하고 이에 관련된 식들을 얻었다. 또한 무의 차수와 변형율과의 상관 관계를 보여주는 식을 주파수 벡터법과 기하하적인 방법으로 각각 유도하여, 이들 두식이 통상의 Moire법에서도 적용가능한 보다 유용한 식임을 확인하였다.

• 대한기계학회논문집A
• /
• 제31권12호
• /
• pp.1200-1207
• /
• 2007

An experimental test is presented for photoelastic stress analysis around a crack tip in tensile loaded plate. The hybrid method coupling photoelastsic fringe inputs calculated by finite element method and complex variable formulations involving conformal mappings and analytical continuity is used to calculate full-field stress around the crack tip in uniaxially loaded, finite width tensile plate. In order to accurately compare calculated fringes with experimental ones, both actual and regenerated photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. Regenerated fringes by hybrid method are quite comparable to actual fringes. The experimental results indicate that Mode I stress intensity factor analyzed by the hybrid method are accurate within three percent compared with ones obtained by empirical equation and finite element analysis.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.84-91
• /
• 2008

Due to the complexity of the engineering problems, it is difficult to obtain directly the stress field around the crack tip by theoretical derivation. In the paper, the hybrid method is employed to calculate full-field stress around the crack tip in uni-axially leaded finite width tensile plate, using the displacement data of given points calculated by finite element method as input data. The method uses complex variable formulations involving conformal mappings and analytical continuity. In order to accurately compare calculated fringes with experimental ones, both actual and reconstructed photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. Reconstructed fringes by hybrid method are quite comparable to actual fringes. The experimental results indicate that Mode I stress intensity factor analyzed by the hybrid method are accurate within a few percent compared with ones obtained by empirical equation and finite element analysis.