• Title/Summary/Keyword: fringe analysis

Search Result 239, Processing Time 0.028 seconds

The Job Satisfaction and Turnover Intention of Emergency Medical Technician in the Private Ambulance Service (응급환자이송업에 종사하는 응급의료종사자의 직무만족도와 이직의도)

  • Kim, Mi-Sook;Lee, Kyoung-Youl
    • The Korean Journal of Emergency Medical Services
    • /
    • v.16 no.1
    • /
    • pp.65-80
    • /
    • 2012
  • Purpose: The objective of this study was to assess the job satisfaction and turnover intention of the emergency medical technicians (EMT) in the private ambulance service, to examine their job satisfaction and turnover intention, and to provide the solution for the management of the private ambulance service. Methods: The survey was conducted with 121 EMTs (73 paramedics, 36 basic EMTs and 12 nurses) in the private ambulance service in Korea from September 15 to October 14, 2011. In the reliability of the questionnaire, Cronbach's ${\alpha}$ was 0.790 for job satisfaction and 0.796 for turnover intention. Using SPSS 18.0, we obtained Cronbach's ${\alpha}$, frequencies, percentages, means, and standard deviations, and performed independent t-tests, ANOVA, and Pearson's correlation analysis. Results: 1) The mean score with regard to job satisfaction was 2.94 and that of their turnover intention was 4.23. In the area of job satisfaction, the mean score of the job demand area was 4.23; 3.97 for the job itself; 3.07 for the area of interaction; 2.98 for the area of autonomy: 2.67 for the organizational demand area; 2.67 for working conditions area; and 1.73 for the wage area. 2) Statistically significant difference was observed in job satisfaction according to age (F=3.819, p=.006), wages (t=-4.640, p=.000), terms of incumbency (F=3.868, p=.011), and in turnover intention it was according to sex (t=-1.995 p=.048), age (F=9.611, p=.000), education levels (F=6.974, p=.002), marital status (t=4.393, p=.000), wages (t=5.515, p=.000), license types (F=8.481, p=.001), and terms of incumbency ( F=14.115, p=.000). 3) The job satisfaction and the turnover intention had a negative correlation to each other (r=-.56, p<.000) in general, and in the sub-7 areas of job satisfaction, the correlation with turnover intention was high in order of the wage area (r=-.61, p=.000), working conditions area (r=-.52, p=.000), the area of autonomy (r=-.49, p=.000), the area of interaction (r=-.45, p=.000), the organizational demand area (r=-.40, p=.000), the job itself (r=-.24, p=.007) and the job demand area (r=-.24, p=.009). Conclusion: The government must take the charge of lowering the turnover intention among paramedics in the private ambulance service by providing the advantage in wages and fringe benefits. Ultimately, this would bring an improvement in the quality of medical emergency services to hospitals especially in the area of patient transfer and transportation.

A Study on Information Breakdown through the Analysis of Industrial Engineering EPC Business Process (산업설비 EPC 업무 분석을 통한 정보 분류 내역에 관한 연구)

  • Cho, Hang-Min;Song, Young-Woong;Choi, Yoon-Ki
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2006.11a
    • /
    • pp.167-172
    • /
    • 2006
  • It follows recently in an order augmentation of overseas construction market plant field and the project of oil gas field is increasing. Consequently, the hazard which secures the competitive power of the overseas plant enterprise of the domestic building industry enterprises the technical competitiveness security which stands, productivity improvement and strategy management propulsion back positive disposal plan establishment are demanded. Even from in that oil gas field of overseas plant enterprise for an industrial competitive power improvement the application of EPC circulation information which relates with a project accomplishment is more demanded, the EPC phased star efficiently it manages the circulation information contents which occurs from the business which is various it is not presented it cannot there is a contents classification system for. If with him about lower the draft the problem point of information omission back of occurrence and business subject for of the fringe land and duplication business occurs, about lower the productivity decrease actual condition is appearing with such problem point. The research which it sees consequently in order to improve the use characteristic of the augmentation of practical application of the contents management system of oil gas field and building industry information civil official establishhes the contents management system the BPM for (Business Process Management) to present the contents classification system of base, it does to sleep. The part of Business Process materiality the knowledge which is demanded, contents information and system anger it analyzes system anger of industrial equipment circulation information it takes a triangular position and to sleep it does.

  • PDF

Households' Characteristics, Forest Resources Dependency and Forest Availability in Central Terai of Nepal

  • Panta, Menaka;Kim, Kyehyun;Lee, Cholyoung
    • Journal of Korean Society of Forest Science
    • /
    • v.98 no.5
    • /
    • pp.548-557
    • /
    • 2009
  • For centuries, forests have been a key component of rural livelihood. They are important both socially and economically in Nepal. Firewood and fodder are the basic forest products that are extracted daily or weekly basis in most of the rural areas in Nepal. In this study, a field survey of 100 households was conducted to examine the degree of forest dependency and forest resource availability, households' livelihood strategy and their relationship with forest dependency in Chitwan, Nepal. A household' response indexes were constructed, Gini coefficient, Head Count Poverty Index (HCI) and Poverty Gap Index (PGI) were calculated and one way ANOVA test was also performed for data analysis. Data revealed that 82/81% of all households were constantly used forest for firewood and fodder collection respectively while 42% of households were used forest or forest fringe for grazing. The Forest Product Availability Indexes (FPAI) showed a sharp decline of forest resources from 0.781 to 0.308 for a 20-yr time horizon while timber wood was noticeably lowered than the other products. Yet, about 33% of households were below the poverty threshold line with 0.0945 PGI. Income distribution among the household showed a lower Gini coefficient 0.25 than 0.37 of landholdings size. However, mean income was significantly varies with F-statistics=246.348 at P=0.05 between income groups (rich, medium and poor). The extraction of firewood, fodder and other forest products were significantly different between the income group with F-statistics=16.480, 19.930, 29.956 at P=0.05 respectively. Similarly, landholdings size and education were also significantly different between the income groups with F-statistics=4.333, 5.981 at P=0.05 respectively. These findings suggested that income status of households was the major indicator of forest dependency while poor and medium groups were highly dependent on the forests for firewood, fodder and other products. Forest dependency still remains high and the availability of forest products that can be extracted from the remaining forestlands is decreasing. The high dependency of households on forest coupled with other socioeconomic attributes like education, poverty, small landholders and so on were possibly caused the forest degradation in Chitwan.Therefore, policy must be directed towards the poor livelihood supporting agenda that may enhance the financial conditions of rural households while it could reduce the degree of forest dependency inspired with other income generating activities in due course.

A photoelastic evaluation of stress distribution during distal movement of upper molar (헤드기어를 이용한 상악 제1대구치의 후방이동 시 응력분포에 관한 광탄성법적 연구)

  • Song, Sae-Eun;Lim, Sung-Hoon;Yoon, Young-Joon;Kim, Kwang-Won
    • The korean journal of orthodontics
    • /
    • v.34 no.2 s.103
    • /
    • pp.121-129
    • /
    • 2004
  • The purpose of this study was to photoelastically visualize 4he distribution of fortes transmitted to the alveolus and surrounding structures using three different types of headgear for the distal movement of the upper molars. A photoelastic maxillary model was made and three different directional forces applied, which were high-pull, straight-pull, and cervical-pull. Stress distribution was recorded through circular polariscope, and two-dimensional photoelastic stress analysis was performed according to isochromatic fringe characteristics. The results were as follows: 1. In the case of high-pull headgear bodily movement occurred in the medium- length outer bow, stress distribution in the apical region was 1st molar, 2nd premolar, lst premolar in sequence and there was no apparent difference. 2. In the case of straight-pull headgear, bodily movement occurred in the long outer bow and stress distribution in the apical region was heavy in the 1st molar, 2nd premolar, 1st premolar in sequence. But. there were no apparent differences according to the length of the outer bow. 3. In the case of cervical- pull headgear, bodily movement also occulted in 4he long outer bow, and apical stress of the premolar region was heaviest among other cases and apical stress of the 2nd premolar was heaviest in the short outer bow. In clinical situations, to achieve bodily movement of the upper 1st molars without modifying outer bow height, applying an outer bow length as long as the inner bow length in high-pull headgear and applying an outer bow length longer than the inner bow length in straight-pull, cervical-pull headgear are recommended.

A Study on High-Precision DEM Generation Using ERS-Envisat SAR Cross-Interferometry (ERS-Envisat SAR Cross-Interferomety를 이용한 고정밀 DEM 생성에 관한 연구)

  • Lee, Won-Jin;Jung, Hyung-Sup;Lu, Zhong
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.28 no.4
    • /
    • pp.431-439
    • /
    • 2010
  • Cross-interferometic synthetic aperture radar (CInSAR) technique from ERS-2 and Envisat images is capable of generating submeter-accuracy digital elevation model (DEM). However, it is very difficult to produce high-quality CInSAR-derived DEM due to the difference in the azimuth and range pixel size between ERS-2 and Envisat images as well as the small height ambiguity of CInSAR interferogram. In this study, we have proposed an efficient method to overcome the problems, produced a high-quality DEM over northern Alaska, and compared the CInSAR-derived DEM with the national elevation dataset (NED) DEM from U.S. Geological Survey. In the proposed method, azimuth common band filtering is applied in the radar raw data processing to mitigate the mis-registation due to the difference in the azimuth and range pixel size, and differential SAR interferogram (DInSAR) is used for reducing the unwrapping error occurred by the high fringe rate of CInSAR interferogram. Using the CInSAR DEM, we have identified and corrected man-made artifacts in the NED DEM. The wave number analysis further confirms that the CInSAR DEM has valid Signal in the high frequency of more than 0.08 radians/m (about 40m) while the NED DEM does not. Our results indicate that the CInSAR DEM is superior to the NED DEM in terms of both height precision and ground resolution.

Assessment of the Correlation between Segregation Potential and Hydraulic Conductivity with Fines Fraction (세립분 함유량에 따른 동상민감성 지수와 수리전도도의 상관관계 평가)

  • Jin, Hyunwoo;Kim, Incheol;Eun, Jongwan;Ryu, Byung Hyun;Lee, Jangguen
    • Journal of the Korean Geotechnical Society
    • /
    • v.37 no.12
    • /
    • pp.47-56
    • /
    • 2021
  • The cryosuction (negative pore pressure) in freezing soils causes groundwater migration from the frozen fringe to freezing front for ice lens formation. Frost heave and heaving pressure by ice lens cause damage to ground infrastructure. In order to prevent damage by the frost heave, various frost susceptibility criteria have been proposed. The SP (Segregation Potential) is the most widely used classification criterion for frost susceptibility in cold regions. The expansion of the ice lens by the migration of the groundwater is a key role in frost heave mechanism, and thus it is necessary to evaluate the hydraulic conductivity. In this paper, soil mixtures of coarse-fines (sand-silt) were prepared in various weight fractions and used for frost heave and column permeability test. For each case, the SP and the hydraulic conductivity were derived and correlations were analyzed. As a results, the transition threshold of the SP and the hydraulic conductivity were shown at 20% and 50% of the silt weight fraction, respectively. Although there are difference between these transition thresholds, these two coefficients show a specific correlation. In the future, additional study should be conducted for detailed analysis of the threshold transition values between SP and hydraulic conductivity.

Antioxidant and anti-aging activities of water extracts from Chionanthus retusus flesh according to different extraction temperatures (추출온도에 따른 이팝나무 과육 물 추출물의 항산화 및 항노화 활성)

  • Choi, Hae-Sim;Lee, Yang-Suk;Seo, Su-Jeong;Kim, Nam-Woo
    • Food Science and Preservation
    • /
    • v.24 no.8
    • /
    • pp.1129-1137
    • /
    • 2017
  • The fringe tree, Chionanthus retusus (Oleaceae) has been used as a natural remedy that helps a paralytic stroke, dementia, phlegm and malaria. This study was conducted to investigate the antioxidant and anti-aging activities of water extracts obtained from the flesh of C. retusus by reflux extraction at room temperature and $80^{\circ}C$, and pressure heating extraction at $110^{\circ}C$, for an increment of their practical use. The highest extraction yield from the flesh of C. retusus was 67.94% extract by pressure heating extraction at $110^{\circ}C$. The content of total polyphenol compounds was the highest by 72.71 mg/g in $80^{\circ}C$ extract by reflux extraction. The highest content of total flavonoid compounds was 7.60 mg/g at $110^{\circ}C$ extract. The results of soluble protein and reducing sugar contents showed the highest content of 4.93 mg/g and 46.77 mg/g in $110^{\circ}C$ extract, respectively. In the analysis of DPPH radical scavenging activity, all extracts showed an excellent effect of 92% in 1.0 mg/mL concentration. The highest effect of ABTS radical scavenging activity was 88.67% at $110^{\circ}C$ extraction in 1.0 mg/mL concentration. Nitrite scavenging ability was the highest as 66.16% at $110^{\circ}C$ extract at pH 1.2 and 1.0 mg/mL concentration. The results of SOD-like activity and xanthine oxidase inhibition activities showed the highest effect of 14.95% and 59.45% at $110^{\circ}C$ extract in 1.0 mg/mL, respectively. Tyrosinase inhibition activity for whitening effect was the highest of 35.31% at $85^{\circ}C$ in 1.0 mg/mL. In the analysis of anti-aging effect, collagenase and elastase inhibition activity showed the highest effects of 37.78% at $110^{\circ}C$ and 20.39% at $80^{\circ}C$, respectively. All results of antioxidant activities and anti-aging effects increased along with the concentration increases. These results indicated that the extracts extracted from the flesh of C. retusus at $80^{\circ}C$ and $110^{\circ}C$ have a large amount of useful ingredients, an excellent antioxidant activity, like as DPPH and ABTS radical scavenging activity, and anti-aging effects to develop functional products than those of $25^{\circ}C$.

Photoelastic evaluation of Maxillary Posterior Crossbite Appliance (Maxillary Posterior Crossbite Appliance의 적용시 응력 분포에 관한 광탄성법적 연구)

  • Jang, Sung-Ho;Yoon, Young-Jooh;Kim, Kwang-Won
    • The korean journal of orthodontics
    • /
    • v.31 no.6 s.89
    • /
    • pp.549-558
    • /
    • 2001
  • This study was undertaken to demonstrate the forces in the maxillary alveolar bone generated by the activation of the maxillary posterior crossbite appliance In the treatment of posterior buccal crossbite caused by buccal ectopic eruption of the maxillary second molar. A photoelastic model was fabricated using a Photoelastic material (PL-3) to simulate alveolar bone and ivory-colored resin teeth. The model was observed throughout the anterior and posterior view in a circular polariscope and recorded photographically before and after activation of the maxillary posterior crossbite appliance. The following conclusions were reached from this investigation : 1. When the traction force was applied on the palatal surface of the second molar, stresses were concentrated at the buccal and palatal root apices and alveolar crest area. The axis of rotation of palatal root was at the root apex and that of the buccal root was at the root li4 area. In this result, palatal tipping and rotating force were generated. 2. When the traction force was applied on the buccal surface of the second molar, more stresses than loading on the palatal surface were observed in the palatal and buccal root apices. Furthermore, the heavier stresses creating an intrusive force and controlled tipping force were recorded below the buccal and palatal root apices below the palatal root surface. In addition, the axis of rotation of palatal root disappeared whereas the rotation axis of the buccal root moved to the root apex from the apical 1/4 area. 3. When the traction force was simultaneously applied on the maxillary right and left second molars, the stress intensity around the maxillary first molar root area was greater than the stress generated by the only buccal traction of the maxillary right or left second molar. As in above mentioned results, we should realize that force application on the palatal surface of second molars with the maxillary posterior crossbite appliance Produced rotation of the second molar and palatal traction, which nay cause occlusal Interference. That is to say, we have to escape the rotation and uncontrolled tipping creating occlusal interference when correcting buccal posterior crossbite. For this purpose, we recommend buccal traction rather than palatal traction force on the second molar.

  • PDF

Photoelastic evaluation of Mandibula Posterior Crossbite Appliance (Mandibular Posterior Crossbite Appliance의 적용시 응력 분포에 관한 광탄성법적 연구)

  • Jung, Won-Jung;Jang, Sung-Ho;Yoon, Young-Jooh;Kim, Kwang-Won
    • The korean journal of orthodontics
    • /
    • v.31 no.6 s.89
    • /
    • pp.559-566
    • /
    • 2001
  • This study was undertaken to demonstrate the forces in the mandibular alveolar bone generated by activation of the mandibular posterior crossbite appliance in the treatment of buccal crossbite caused by lingual eruption of mandibular second molar. A three-dimensional photoelastic model was fabricated using a photoelastic material (PL-3) to simulate alveolar bone. We observed the model from the anterior to the posterior view in a circular polariscope and recorded photogtaphically before and after activation of the mandibular posterior crossbite appliance. The following results were obtained : 1. When the traction force was applied on the buccal surface of the mandibular second molar, stress was concentrated at the lingual alveolar crest and root apex area. The axis of rotation also was at the middle third of the buccal toot surface and the root apex, so that uncontrolled tipping and a buccal traction force for the mandibular second molar were developed. 2. When the traction force was applied on the lingual surface of the mandibular second molar more stress was observed as opposed to those situations in which the force application was on the buccal surface. In addition, stress intensity was increased below the loot areas and the axis of rotation of the mandibular second molar was lost. In result, controlled tipping and intrusive tooth movements were developed. 3. When the traction forte was applied on either buccal or lingual surface of the second molar, the color patterns of the anchorage unit were similar to the initial color pattern of that before the force application. So we can use the lingual arch for effective anchorage in correcting the posterior buccal crossbite. As in above mentioned results, we must avoid the rotation and uncontrolled tipping, creating occlusal interference of the malpositioned mandibular second molar when correcting posterior buccal crossbite. For this purpose, we recommend the lingual traction force on the second molar as opposed to the buccal traction.

  • PDF