• Geomechanics and Engineering
• /
• v.14 no.3
• /
• pp.247-255
• /
• 2018

Soil stabilization can make the soils becoming more stable by using an admixture to the soil. Lime stabilization enhances the engineering properties of soil, which includes reducing soil plasticity, increasing optimum moisture content, decreasing maximum dry density and improving soil compaction. Silica fume is utilized as a pozzolanic material in the application of soil stabilization. Silica fume was once considered non-environmental friendly. In this paper, the materials required are kaolin grade S300, lime and silica fume. The focus of the study is on the determination of the physical properties of the soils tested and the consolidation of kaolin mixed with 6% silica fume and different percentages (3%, 5%, 7% and 9%) of lime. Consolidation test is carried out on the kaolin and the mixtures of soil-lime-silica fume to investigate the effect of lime stabilization with silica fume additives on the consolidation of the mixtures. Based on the results obtained, all soil samples are indicated as soils with medium plasticity. For mixtures with 0% to 9% of lime with 6% SF, the decrease in the maximum dry density is about 15.9% and the increase in the optimum moisture content is about 23.5%. Decreases in the coefficient of permeability of the mixtures occur if compared to the coefficient of permeability of kaolin soft clay itself reduce the compression index (Cc) more than L-SF soil mix due to pozzolanic reaction between lime and silica fume and the optimum percent of lime-silica fume was found to be (5%+6%) mix. The average coefficient of volume compressibility decreases with increasing the stabilizer content due to pozzolanic reaction happening within the soil which results in changes in the soil matrix. Lime content +6% silica fume mix can reduce the coefficient of consolidation from at 3%L+6%SF, thereafter there is an increase from 9%L+6%SF mix. The optimal percentage of lime silica fume combination is attained at 5.0% lime and 6.0% silica fume in order to improve the shear strength of kaolin soft clay. Microstructural development took place in the stabilized soil due to increase in lime content of tertiary clay stabilized with 7% lime and 4% silica fume together.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.72-81
• /
• 2004

For disposal food wastes which is about 30% portion of tatal organic wastes, vermicomposting is more environmental-friendly treatment than lanfill, incineration, etc. Recently, the interest has been increasing but there are many problems on management of vermicopmposting in field especially. This study was conducted to investigate an optimal factors, which are limit NaCl conc., the mixing rate of food wastes and casting for growth of an earthworm related to efficient vermicomposting. The limit conc. of NaCl was 0.5% and in case of feeding food wastes to earthworms as a prey only, most earthworms were dead in a few hours due to excessive degradation of organic materials and high NaCl conc. However as feeding with the casting of proper mixing rate(3:7), most earthworms were survived until finishing composting. It was investigated the increaser degree of matureness of food wastes, the higher conc. of NaCl, therefore for efficient vermicomposting, it seemed proper mixing rate of food wastes and the casting is better than matureness of food wastes. and the most suitable mixing rate was 3:7 food wastes and the casting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.200-207
• /
• 2016

The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.384-390
• /
• 2018

Air and soil are being contaminated by the environmental pollution as a result of climate change and urbanization, resulting in water pollution reaching serious levels. In this studies, we investigated the use of antimicrobial copper for the removal of biological pollutants from water system. Specifically, we tested its effects against E. coli, B. subtilis, S. aureus, K. pneumoniae and P. aeruginosa. Made a sphere shape having a diameter of 2cm using a strip-shaped copper wire of 0.5g, 1g and 2g. And then, to confirm the antimicrobial activities, each copper ball was equipped in the broth which inoculated each pathogens. The results showed that bacterial growth of the five test bacteria was inhibited by more than 99% after reaction with a 0.5 g copper ball for at least 20 minutes. Based on the these results, if perform the further experiment such cytotoxicity, it is expected that will be enough to be used as a filter for water quality purification. The developed technique is expected to be widely applied in various industries.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.40-45
• /
• 2018

Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.

• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.231-237
• /
• 2011

Highly bio-active plant essential extracts and oils from pepper, clove bud, rosemary and origanum which are selected to develop environment-friendly insecticides was studied for their acute toxicity. The results of acute oral toxicity using rats showed $LD_{50}$ value of over 2,000 mg/kg bw for pepper, clove bud, rosemary and origanum oils. The calculated acute dermal $LD_{50}$ value of pepper was over 4,000 mg/kg bw and anther testing materials was over 4,000 mg/kg bw. The skin irritation test showed that pepper, clove bud and rosemary oils had no irritation while origanum oil had a moderate irritation. According to the eye irritation test, it showed that there was no irritation for pepper and rosemary oils, while there were irritation for clove bud and origanum oils. Consequently, pepper and rosemary oils were shown to be low in toxicity whereas clove bud oil was indicated to cause a mild eye irritability and origanum oil, causing a moderate skin and eye irritability.

• Korean Journal of Organic Agriculture
• /
• v.15 no.4
• /
• pp.437-452
• /
• 2007

From the experiments on the effect of chitosan and wood vinegar, which are environment-friendly materials, on the growth of eggplant and leaf lettuce, the following results were obtained. 1. The effect of chitosan and wood vinegar treatment on the growth of eggplant 1) There was no difference in soil component elements before and after treatment with chitosan and wood vinegar. The total number of microorganisms tended to increase after treatment with chitosan and wood vinegar, while the number of bacteria increased among microorganisms. However, there was no consistent tendency in the number of Acinomycetes, fungi, and trichodema between treatments. 2) The growth and the yield of eggplant increased compared with the control plot in both the chitosan-treated plot and the wood vinegar-treated plot. However, there was no significant difference between the treatments. The yield of eggplant per 10a increased in chitosan- and wood vinegar-treated plots compared with the controlled plot. There was no significant difference in treatments, however, the plot treated with 800 times-diluted solution showed a higher growth. 2. The effect of chitosan and wood vinegar treatment on the growth of leaf lettuce 1) There was no difference in soil component elements before and after treatment with chitosan and wood vinegar. The number of bacteria increased among microorganisms. However, there was no consistent tendency in the number of Acinomycetes, fungi, and trichodema between treatments. 2) The growth of leaf lettuce in both chitosan-treated plot and wood vinegar-treated plot increased compared with the control plot, however, there was no significant difference between the treatments. On the whole, the plot treated with greater concentration showed a higher growth.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.295-310
• /
• 2017

This study investigated the growth of five phytopathogenic fungi including Colletotrichum gloeosporioides, Diaporthe citri, Phytophthora capsici and others according to different concentrations of water extract in order to provide reference data for developing environment-friendly agricultural materials using five native Fagaceae species including Quercus acuta, Quercus salicina, Quercus glauca, Quercus gilva and Castanopsis cuspidata var. sieboldii. As the concentration of aqueous extracts of Fagaceae increased according to donor plants, the mycelial growth of phytopathogens showed a decreasing tendency. Differences were found in the degree of inhibition according to types of donor plants and pathogenic fungi. Diaporthe citri, Phytophthora capsici, Pythium graminicola on the water extract of Castanopsis cuspidata var. sieboldii inhibited mycelial growth by 84% in 25% of the treatment group and by 87% in more than half of the treatment group. The water extract of Quercus acuta was found to have no inhibitory effect against the mycelial growth of Diaporthe citri. The aqueous extracts of Quercus salicina, Quercus glauca and Quercus gilva insignificantly inhibited mycelial growth by approximately 15%. The total phenolic content of receptor plants exhibiting antifungal activity was highest in Castanopsis cuspidata var. sieboldii with a content of 22.32 mg/g phenols, followed by Quercus salicina with 8.32 mg/g, Quercus glauca with 6.83 mg/g, Quercus gilva with 5.95 mg/g, and Quercus acuta with 5.24 mg/g. The aqueous extracts of Castanopsis cuspidata var. sieboldii among the five Five Fagaceae Plants of were the most effective antifungal activity.