• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.87-91
• /
• 2015

As negative effects of climate change have been visualized and its direct damages to economy have been realized, the global efforts to respond to climate change by reducing greenhouse gas emission were accelerated. Korea's Carbon Footprint Labeling gets a lot of attention as one of the effective methods to contribute to national GHG reduction goal, and for enterprises to show customers how much effort the company put into global warming prevention. Consumers' interest on low-carbon products has been increasing. This study uses Life Cycle Assessment method to calculate the amount of carbon emission of dishwashing detergent, LG Household & Healthcare, which reduced carbon emissions by using raw materials that has relatively lower environment load. Life Cycle Assessment Method is based on guidelines of Carbon Footprint Labeling, Ministry of Environment, and pre-manufacturing, manufacturing, and disposal phase are included while use phase of the product is excluded from assessment. In order to understand the effects of eco-design on carbon emissions, the dishwashing detergent's carbon emissions are compared before and after the change of main raw materials. The result shows the improvement from $0.47kgCO_2eq/kg$ to $0.38kgCO_2eq/kg$ per product, and this means the main raw materials' carbon emissions could be reduced by around 9.4%, which is equivalent to 916tons of GHG emissions per year.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.773-788
• /
• 2017

This study was carried out to investigate the damage patterns, the occurrence and migration time of Pseudococcus comstocki and in order to improve the control effect of organic agricultural materials (OAMs). The experiment was carried out at Okcheon's organic vineyard ($2,500m^2$, sandy loam, manure) where planted 8~9 year old 'Muscat of Alexandria' vines. The comstock mealybug's migration to grape clusters occurred from the middle of July, and produced eggs in the grape clusters from the end of July, and the density of the comstock mealybug was highest at $0.6cm^2$ in late August. The number and fruit damage of comstock mealybug in eco-friendly vineyards were higher than in conventional culture vineyard. And the marketability of green variety grape was more damaged from comstock mealybug than the black variety grape. Toxicities of 8 OAMs were evaluated to comstock mealybug at the recommended concentration. As a results, Lightyellow sophora and Derris extracts exhibited strong insecticidal activity with 100% mortality. When the Lightyellow sophora extract was uniformly distributed on the vine from early-July to mid-July, fruit damage reduction rate was 96.2% and 84.6%, respectively. So commercial grapes could be harvested. Therefore, it was considered to be effective to reduce fruit damage by controlling in early - late July (the green stage) when the comstock mealybug migrated to grape clusters in the vine greenhouse. In the future, it will be necessary to study the effect of external exposure time and momentum on the control of OAMs.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.97-110
• /
• 2020

The purpose of this study is to develop milk education materials for adults based on the scientific basis of right milk consumption in the format of card news that can be easily accessed on a mobile phone or the internet and has high impact. The topics to be included in the card news were selected based on the findings from literature analysis and focus group interviews with 10 adults(32.0±6.4 years). For the eight selected topics, effective communication was made by suggesting some information that users want to know while reflecting adult eating habits, lifestyle habits, and nutrition and health interests. The card news draft was reviewed by researcher and consulting experts, and then questionnaire survey was conducted using Likert 5-point scales by 50 adults(42.7±10.2 years). Based on the results of the review, consultation and questionnaire survey, a final draft of the card news consisting of 11 cuts was completed. Card news proposal is expected to produce educational effects, since the respondents showed high satisfaction with the card news (higher than 4 on the 5-point scales) according to the questionnaire survey. Adults can easily access and use the card news developed in this study, and thus this card news is expected to increase milk consumption in adulthood and improve nutrition and health through friendly and systematic milk education.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.75-86
• /
• 2012

In this study, eco-friendly hybrid composite boards were manufactured from green tea, 3 kinds of charcoals and wood fiber for developing interior materials to reinforce the strength performances and the functionalities in addition to performances of the hybrid composite boards composed of green tea and wood fiber. The effects for the kind and the component ratio of raw materials on dynamic MOE (modulus of elasticity) were investigated, and static bending strength performances were nondestructively estimated. Dynamic MOEs were highest in the hybrid composite boards composed of green tea, fine charcoal and wood fiber on the whole. However, the difference caused by the kind of charcoals was small. These values decreased with increasing component ratios of green tea and charcoals. The hybrid composite boards using $E_1$ grade urea resin had the higher values than those using $E_0$ grade urea resin, however the difference between them markedly decreased than that of hybrid composite board composed of green tea and wood fiber, and it was found that these values were markedly improved than those of the hybrid composite boards composed of green tea and wood fiber. There were mostly high correlations with significance at 1% level between dynamic MOEs and static bending strength performances, and this means that the static bending strength performances can be estimated from dynamic MOE.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.2
• /
• pp.95-102
• /
• 2000

Experiments related to the field of sericulture started in the years 1900, in Korea. The sericultural experimental station in Korea was first organized among agricultural fields in Korea, indicating that sericulture in Korea was regarded as an important field of agriculture. Sericulture has been devoted to a great deal for the improvement of Korean economy during the past 100 years even under the coarse social circumstances caused particularly by the Korean War, However, the traditional Korean sericulture, aimed to produce silk yarn, was weakened, because of several reasons such as diminishment in silk consumption, increased labor charge in Korea, and so on. After this difficulty time, the Korean sericulture was revolutionized by shifting into functional sericulture from 1995, and the Korean sericulture now plays an important role for the improvement of human health. Mulberry tree, silkworm, and silk have a boundless potential to be developed as resources. We expect the know-how obtained through silkworm research would expand to the other insect research too. Thus, an area of entomological industry is hoped to prosper owing to insect research as well as sericulture. Mulberry tree is known to possess many bio-active substances, so it can be utilized as a resource for substitute medicine and a raw material for the functional food. In addition, an invention of genetically engineered mulberry variety, which will produce more bioactive substances, is expected. Silkworm is one of the most extensively studied insect organisms on the genome so far, Thus, silkworm is expected to be an "insect bio-factory", enabling mass-production of useful proteins by transformation, in which useful foreign genes are assimilated into silkworm. Silk can be transformed into several phases, because it possesses useful functional groups, which are sensitive to chemical reaction. Also, because silk fibrin itself is protein, it has a superior applicability as tissue membrane. Due to this usefulness, many researchers are now working on the silk as food, cosmetic, medical resource, and bioengineering resource, and even an expanded application is expected using silk in the future. Until now, the researches on insects were largely focused on the prevention of the damage caused by pest, instead of a beneficial aspect. However, insects are thought to be the fourth natural resource in the world, possessing unlimited potential as world resources in the near future. Therefore, our entomological research effort should be focused on the subject with potential for industrialization. Such subject includes selecting the insect species useful for environmental evaluation, construction of environment-friendly agricultural ecosystem, pollen mediation, pet, and advanced bio-resources.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.30-37
• /
• 2013

The objective of this research was to understand herbicidal activity of essential oils isolated from leaves of pine (Pinus densiflora), nut pine (Pinus koraiensis), larch (Larix kaempferi) and khingan fir (Abies nephrolepsis) in Korea. In a seed bioassay, essential oils of nut pine, larch and khingan fir inhibited the growth of rapeseed (Brassica napus) seedlings by 50% at 4,766, 1,865, $5,934{\mu}g\;ml^{-1}$, respectively, however, that of pine did not show any herbicidal effect. In a green house experiment, fall panicum, Southern crabgrass, sorghum, barnyardgrass, quackgrass, black nightshade, Indian jointvetch, velvet leaf, and Japanese morningglory were controlled in 24 hours by the foliar application of 10% essential oils from pine, nut pine, larch and khingan fir. The treated plant parts showed burndown effect, however, new shoots appeared 3 days after treatment. Results of GC-MS analysis showed that essential oils from pine, nut pine, larch and khingan fir contained 16, 25, 25, and 16 compounds, respectively, with hydrocarbons, alcohols, ketones, and esters. The major compounds of the essential oils were 3-carene, bornyl acetate, camphene, limonene, ${\alpha}$-pinene, ${\beta}$-pinene and ${\beta}$-phellandrene.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4272-4278
• /
• 2014

One of the most effective ways of preventing skin aging is to protect the skin from UV radiation, which was identified as the primary cause of photoaging. Therefore, it is necessary to develop natural and environment-friendly materials to the human skin. This study examined the effects of MAAs extracted from Chlamydononas hedleyi on UV protection and anti-inflammation in human skin cells. The function of porphyra-334 in the skin, which was isolated and purified from MMAs mixture, was tested in terms of its UV protective ability and anti-inflammation. As a result, porphyra-334 played a role in protecting the skin from UV radiation and anti-inflammation through the suppression of COX-2 expression. These results suggest that porphyra-334 can be a useful material in cosmetic products because it can protect the skin from UV radiation and anti-inflammation.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.39-45
• /
• 2010

Controlled low strength material(CLSM) is produced by mixing portland cement, fine aggregates, water and chemical admixtures. Sand is the most commonly used as the fine aggregates in the conventional CLSM. It is getting more and more difficult to obtain sand in Korea so it is required that the alternative materials be developed as the replacement of sand. Since the engineering characteristics of coal ash are similar to the sand, it becomes necessary to examine the application of the coal ash as the alternative material for CLSM and as the environment-friendly material. When the results meet the optimum pH level that plants can live, it can be expanded the scale of application of the study on the plant as the important field. This study was subjected to present the method to reduce the pH range of CLSM to a suitable condition that plants can survive. To verify this method, the care of neutralization was conducted by immersing the specimen to Ammonium monohydrogen phosphate. Before curing and neutralization, the maximum pH of developmental CLSM is approximately 11. However, the pH value of developmental CLSM has under 9.5 after peaceful curing and neutralization management.