• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.545-550
• /
• 2016

본 연구에서는 말뚝기초의 실내모형시험을 통해 연약지반상의 경량포장체용 기초로서의 적합성을 분석 및 평가를 목적으로 하고 있다. 안전성 평가를 위해 실내모형시험용 경량포장체용 말뚝기초모형을 실제 포장체 사이즈의 1/30으로 축소한 모형을 이용하여 시험을 실시하였다. 지반 조건은 연약지반을 모사하여 모델링하였고, 말뚝은 마찰군말뚝으로 실험하였다. 제한된 실험으로부터 측정된 모형포장체의 침하량은 Case A는 0.86 mm, Case B는 0.70 mm, Case C는 0.50 mm로 측정되었다. 측정된 말뚝기초 모형의 실험값을 실제 크기로 환산하였을 때의 최대침하량과 부등침하량은 각각 25.8 mm와 10.8 mm로 도로교 설계기준에 의거하여 최대부등변위량인 50 mm와 부등변위량 20 mm를 넘지 않는 것으로 보이며 침하량을 기준으로 안전성을 평가 할 경우 안전한 것으로 판정되었다.

• 화약ㆍ발파
• /
• 제37권4호
• /
• pp.26-35
• /
• 2019

타정식 현수교의 중력식 앵커리지를 설계하는 데 있어, 지반과 콘크리트 앵커블록 사이에 작용하는 접촉 마찰력은 교량의 주케이블의 장력을 지지하는데 많은 기여를 하고 있기 때문에 콘크리트와 암반 사이 접촉면의 마찰 및 전단 저항 특성을 이해하는 것이 중요하다. 이를 위해, 본 연구에서는 휴대용 레이저 스캐너를 활용하여 발파 바닥면을 스캐닝하였으며, 이를 바탕으로 3차원 모델링 및 거칠기를 정량적으로 분석하였다. 또한 발파 바닥암반 단면 데이터를 활용하여, 발파 바닥암반-콘크리트 경계면을 갖는 모델을 생성하였다. 동적파괴과정해석기법(DFPA-3D)를 활용하여, 해당 모델에 대한 직접 전단시험 모사를 수행하였으며, 이를 바탕으로 발파 바닥암반-콘크리트 접촉면에 대한 전단파괴 거동을 확인 및 분석하였다.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.547-555
• /
• 2016

철도차량의 휠의 마모는 주로 곡선 주행 시 발생한다. 휠의 형상 변화는 차량 동적 안정성에 중요한 영향을 미친다. 본 연구에서는 곡선 주행 시 휠 마모 특성 분석을 위해 곡선 반경 크기와 속도를 변경시키면서 휠 마모량을 계산하였다. 다물체 동역학 해석에 기초한 차량 동역학 해석결과로부터 마모인자를 계산하고 BRR(British Rail Research)에서 제시한 마모 모델을 이용하여 휠의 마모량을 계산하였다. 반경 300m에서의 마모량이 다른 반경과 비교하여 매우 큰 것으로 나타났다. 곡선 선로에 윤활유를 도유하는 경우 마모 특성 변화를 분석하기 위해 휠의 답면과 플랜지 부위의 마찰계수를 다르게 하여 휠 마모량을 계산하였다. 도유 시 휠 마모의 개선 효과를 여러 반경에서 계산하고 실제 도시철도구간에서 마모 개선 효과를 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제14권3호
• /
• pp.19-27
• /
• 2013

최근, 갑작스런 집중호우로 인하여 자연 및 인공사면의 붕괴가 종종 발생하고 있다. 이를 예방하기 위한 여러 가지 보강공 법들이 개발되어 적용되고 있다. 그 중에서도 쏘일네일링 공법은 시공성과 경제성 등의 이유로 그 활용이 증대되고 있다. 쏘일네일링 공법은 다른 보강공법들과 함께 사용하는 경우도 있으며, 또한 강재와 시멘트그라우팅과의 일종의 복합 구조체로서 지반과 그라우팅사이의 마찰력을 활용하는 공법이다. 본 연구에서는 선단확장형 쏘일네일링 공법을 개발하였으며, 이는 네일 끝단에 앵커체가 부착되어 있다. 이 앵커체는 네일링 작업 중 네일 끝단에서 확개되면서 지반에 정착되게 된다. 본 연구에서는 네일링 시공 후 그라우팅을 하지 않은 상태와 그라우팅 후 양생이 된 경우 각각에 대해 현장인발저항시험을 실시하였다. 시험결과로부터 선단확장형 쏘일네일의 선단쐐기력을 분석하였으며, 거동특성을 종합적으로 고찰하였다.

• The Journal of Advanced Prosthodontics
• /
• 제11권6호
• /
• pp.305-312
• /
• 2019

PURPOSE. The purpose of this study was to compare computer-aided design/computer-aided manufacturing (CAD/CAM) abutment and prefabricated abutment in Morse taper internal connection type implants after cyclic loading. MATERIALS AND METHODS. The study was conducted with internal type implants of two different manufacturers (Group Os, De). Fourteen assemblies were prepared for each manufacturer group and divided into 2 groups (n=7): prefabricated abutments (Os-P, De-P) and CAD/CAM abutments (Os-C, De-C). The amount of axial displacement and the removal torque values (RTVs) were measured before and after cyclic loading (10⁶ cycles, 3 Hz with 150 N), and the tensile removal force to dislodge the abutments was measured after cyclic loading. A repeated measures ANOVA and a pattern analysis based on the logarithmic regression model were conducted to evaluate the effect of cyclic loading on the axial displacement. The Wilcoxon signed-rank test and the Mann-Whitney test was conducted for comparison of RTV reduction% and tensile removal forces. RESULTS. There was no significant difference between CAD/CAM abutments and prefabricated abutments in axial displacement and tensile removal force; however, significantly greater RTV reduction% after cyclic loading was observed in CAD/CAM abutments. The correlation among the axial displacement, the RTV, and the tensile removal force was not significant. CONCLUSION. The use of CAD/CAM abutment did not significantly affect the amount of axial displacement and tensile removal force, but presented a significantly greater removal torque reduction% than prefabricated abutments. The connection stability due to the friction at the abutment-implant interface of CAD/CAM abutments may not be different from prefabricated abutment.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.307-314
• /
• 2018

Strength of loess that experienced cyclic freeze and thaw is of great significance for evaluating stability of slopes and foundations in loess regions. This paper takes the frequently encountered loess in the Northwestern China as the study object and carried out three kinds of laboratory tests including freeze-thaw test, direct shear test and SEM test to investigate the strength behaviors of loess after cyclic freeze and thaw, and the correlation with meso-level changes in soil structure. Results show that for loess specimens at four dry densities, the cohesion decreases with freeze-thaw cycles until a residual value is reached and thus an exponential equation is proposed. Besides, little change in the angle of internal friction was observed as freeze-thaw proceeds. This may depend on the varying of soil structure, based on which a clue can be found from the surface morphology and mesoscopic scanning of loess specimens. Clearly we observed significant changes in surface morphology of loess and it tends to aggravate at higher water contents or more cycles of freeze and thaw. Moreover, freeze-thaw cycling leads to obvious changes in the meso-structure of loess including lowering the particle aggregates and increasing both the proportion of fine particles and porosity area ratio. A damage variable dependent on the ratio of porosity area is introduced based on the continuum damage mechanics and its correlation with cohesion is discussed.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.99-109
• /
• 2015

In the construction industry, the interest for recycling aggregates is rising as more people demand for alternatives due to lack of supply of natural aggregates and environmental problems. However, in order for recycled aggregates to be used in infrastructures, stability and other factors need to be verified. Therefore, the objective of this study is to analyze the sensitivity of soil properties to secure slope safety according to various heights of embankment when bottom ash and dredged soil mixture is applied in the embankment. In most cases, all heights were safe for the slide for the embankment whether the water level is full or sudden draw down. The result of the sensitivity analysis revealed that the unit weight of embankments is highest among all factors to be considered. However, the sensitivity of the unit weight became smaller and the sensitivity of the friction angle of embankments increased with the height of embankments. The sensitivity of factors of core materials is very small because the core has weaker physical properties than those of the embankment. The effect of the height for each factor is different for each slope and water levels. The sensitivity of the unit weight of embankments is most affected when the height is 60m in the upstream slope. To conclude, bottom ash and dredged soil mixture can be applied in the embankment and different factors must be considered in different scale because the sensitivity depends highly on the height of embankments.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.53-62
• /
• 2017

In this paper, the effect of oil conditions in rotor dynamic behaviors of a FFRB (Fully-Floating Ring Bearing) is investigated. Through the characteristic of a FFRB has two films, it has several advantages such as less friction loss and better stability over a wide speed range. However, it is difficult to supply a oil to the inner film. Thus, turbocharger makers have been paid significant attention to the lubrication of a FFRB because of its importance. This work focuses on the influence of oil inlet pressure and temperature. The methodologies of computational simulation and experimental test were used to estimate the rotor dynamic behaviors. In experimental test, the single-scroll turbocharger for the 1.4L diesel engine was used. The results show that the oil inlet pressure and temperature will place considerable influence on the rotor response. Oil conditions affect RSR (Ring Speed Ratio) which is cause of sub-synchronous vibrations, which also cause of oil whirling and whip even a critical speed. At higher speed range, the phenomenon of self-excited vibrations which is cause of instability of fluid whirl is investigated through the orbit shapes that consist of small orbit and large amplitude orbit. It is shown that some performance of a FFRB can be controlled by the conditions of oil supply. Finally, it was revealed that the oil induced operating conditions will strongly affect the turbocharger rotor dynamics behaviors.

• 드라이브 ㆍ 컨트롤
• /
• 제12권1호
• /
• pp.1-8
• /
• 2015

The stability of friction characteristics and thermal management for a dry type dual clutch transmission (DCT) are inferior to those of a wet clutch. Too high temperature resulting from frequent engagement of DCT speeds up degradation or serious wear of the pressure plate or burning of the clutch disk lining. Even though it is significantly important to estimate the temperature of a dry double clutch (DDC) in real-time, few meaningful study of the thermal model of DDC has been known yet. This study presented a thermal analytical model of lumped parameters for a DDC by analyzing its each component firstly. Then a series of experimental test was carried out on the test bench with a patented temperature telemetry system to validate the proposed thermal model. The thermal model, whose optimal parameter values were found by optimization algorithm, was also simulated on the experimental test conditions. The simulation results of DDC temperature show consistency with the experiment, which validates the proposed thermal model of DDC.

• 한국지반공학회지:지반
• /
• 제2권3호
• /
• pp.51-66
• /
• 1986

본 연구는 재래식 옹벽의 단점을 보완하여 skin element로써 간단한 L-type concrete block을 사용하고 reinforcing strip재로써 plastic fabric strip를 이용하며, back fill재는 우리 주위에서 흔히 접하는 나강암풍화토를 사용하여 만든 보강벽체를 통하여 몇가지 실험을 한 결과 이들 서반재료의 특성을 발안하여 개발된 이론식에 의하여 결정한 벽체의 보강은 삽입한 strip의 간격, 층수, 뒷채움 재의 입도분포, 다짐상태 및 strip의 인장강맥에 좌우되며 본보강옹벽체는 구조적으로 안정하고 경제적인 시공이 가능함이 확인되었으며 우리나라 특히 강원도와 같은 유간지역에서는 보다 효과적으로 이용될 수 있을 것으로 판단된다.