• Tribology and Lubricants
• /
• 제15권3호
• /
• pp.265-271
• /
• 1999

Wherever there are rotating equipment and contact between surface, there is wear and the generation of wear particles. The particles contained in the lubricating oil carry detailed and important information about the condition monitoring of the machine. This information may be deduced from particle shape, composition, size distribution, and concentration. Therefore, This paper was undertaken to Ferrography system of wear debris generated from lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of Pin and V-Block type by Ti(C, N) coated. It was shown from the test results that wear particle concentration (WPC) and wear severity Index( $I_{S}$), size distribution in normal and abnormal wear have come out all the higher value by increases sliding friction time. Wear shape is observed on the Ferrogram it was discovered a thin leaf wear debris as well as ball and plate type wear particles. This kind of large wear shape have an important effect not only metals damage, but also seizure phenomenon.

• Structural Monitoring and Maintenance
• /
• 제5권2호
• /
• pp.189-204
• /
• 2018

This paper examines the seismic responses of a reinforced concrete (RC) frame core-tube building with pre-pressed spring self-centering energy dissipation (PS-SCED) braces. The PS-SCED brace system consists of friction devices for energy dissipation, pre-pressed combination disc springs for self-centering and tube members as guiding elements. A constitutive model of self-centering flag-shaped hysteresis for PS-SCED brace is developed to better simulate the seismic responses of the RC frame core-tube building with PS-SCED braces, which is also verified by the tests of two braces under low cyclic reversed loading. Results indicate that the self-centering and energy dissipation capabilities are well predicted by the proposed constitutive model of the PS-SCED brace. The structure with PS-SCED braces presents similar peak story drift ratio, smaller peak acceleration, smaller base shear force and much smaller residual deformations as compared to the RC frame core-tube building with bucking-restrained braces (BRBs).

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2420-2427
• /
• 2000

In contacting between surface, there is wear and the generation of wear particles. The particles contained in the lubricating oil carry detailed and important information about the condition monitoring of the machine. Therefore, This paper was undertaken for Ferrography system of wear debris generated from lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of Pin and V-Block type by Ti(C,N) coated. It was shown from the test results that wear particle concentration(WPC) ; wear severity Index(IS) and size\distribution have come out all the higher value by increases sliding friction time. By the Ferrogram a thin leaf wear debris as well as ball and plate type wear particles was observed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1044-1051
• /
• 2009

During contact between surfaces, there is wear and the generation of wear. The particles contained in the lubricating oil carry detailed and important monitoring information about the condition of the machine. Therefore, this paper was undertaken for the Ferrography system of wear debris generated from a lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of the Pin and V-Block types by Ti(C,N) coated. It was shown from the test results that wear particle concentration(WPC), wear severity index(Is) and size distribution have come out all higher with increases in sliding friction time. With the Ferrogram thin leaf wear debris as well as ball and plate type wear particles were observed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.358-359
• /
• 2005

Chemical mechanical polishing(CMP) process depends on a variety of variables. Especially, surface roughness of pad plays a key role in material removal in CMP in terms of transportation ability of pores and real contact area. The surface roughness is deteriorated with polishing time by applied pressure and relative velocity. In this reason, diamond conditioner has been used to maintain the roughness on the pad. The authors try to investigate the correlation between pad roughness and frictional behavior by comparing ex-situ conditioning with in-situ conditioning.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.30-35
• /
• 2001

The morphological analysis of wear particle is a very effective means for machine condition monitoring and fault diagnosis. In order to describe morphology of various wear particle, the wear test was carried oui under friction experimental conditions. And fractal descriptors was applied to boundary and surface of wear particle with image processing system. These descriptors to analyze shape and surface wear particle are share fractal dimension and surface fractal dimension. The boundry fractal dimension can be derived from the boundary profile and surface fractal dimension can be determined b)r sum of intensity difference of surface pixel. The morphology of wear particles can be effectively obtained by two fractal dimensions.

• 헤리티지:역사와 과학
• /
• 제49권4호
• /
• pp.196-217
• /
• 2016

본 연구는 국가지정 동산문화재에 대하여 국가가 직접 수행하는 정기조사를 중심으로 국가지정 지류문화재의 보존상태 및 보존환경을 파악하고 보존관리 방안을 모색하고자 수행하였다. 조사대상은 2014~2015년도에 문화재보존과학센터와 미술문화재연구실이 공동조사한 내용으로 제한하였다. 지류문화재는 재질상 온 습도, 빛 등 외부환경의 영향을 받기 쉽고 물리적 힘에 의해서도 쉽게 손상될 수 있으므로 안정적인 보존환경이 매우 중요하다. 그러므로 문화재보호법에 의해 시행되는 동산문화재 정기조사를 통하여 오염, 찢어짐, 꺾임, 마찰, 결손 등 보존처리가 시급한 문화재이다. 따라서 처리시기를 놓침으로써 돌이킬 수 없는 상황에 이르지 않도록 철저히 관리해야 하며 처리 후 관리상황에 대해서도 지속적인 모니터링이 필요하다. 이와 같이 정기조사를 통해 문제점이 노출된 국가지정 문화재들을 중심으로 안료, 재질, 구조분석 등 정밀조사 추진, 문화유산 보존관리 데이터 축적을 정기조사와 병행하여 별도 추진할 필요가 있음이 판단되었다. 이러한 국가지정 문화재의 상세한 데이터들은 향후 국가지정 지류문화재의 보다 합리적인 보존관리 체계 구축의 기반이 될 것이며, 정기조사 방법의 지속적인 개선 역시 가능하게 할 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.481-482
• /
• 2006

Chemical-mechanical polishing, the dominant technology for LSI planarization, is trending to play an important function in micro-electro mechanical systems (MEMS). However, MEMS CMP process has a couple of different characteristics in comparison to LSI device CMP since the feature size of MEMS is bigger than that of LSI devices. Preliminary CMP tests are performed to understand material removal rate (MRR) with blanket wafer under a couple of polishing pressure and velocity. Based on the blanket CMP data, this paper focuses on the consumable approach to enhance MEMS CMP by the adjustment of slurry and pad. As a mechanical tool, newly developed microstructured (MS) pad is applied to compare with conventional pad (IC 1400-k Nitta-Haas), which is fabricated by micro melding method of polyurethane. To understand the CMP characteristics in real time, in-situ friction force monitoring system was used. Finally, the topography change of poly-si MEMS structures is compared according to the pattern density, size and shape as polishing time goes on.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.185-187
• /
• 2012

본 논문에서 응용하고자 하는 MR 유체 댐퍼는 상자성(paramagnetic) 입자를 MR 유체 내부에 분산시켜 전류에 따라 발생하는 전자석 원리를 이용하여 MR 댐퍼 내부의 유체의 항복 전달 응력의 변화 실키 수 있는 특징이 있다. 즉, 전류의 세기에 따라 MR 유체 댐퍼 내부의 마찰계수가 달라지는 현상을 이용하는 것이다. 이러한 MR 유체 댐퍼 제어에 사용하고자 하는 MCU는 마이크로칩 사의 dsPIC 칩을 이용하여 성능을 개선하고자 하며 전류제어에는 PWM을 이용하며, 외부 모니터링을 위하여 UART 통신을 이용하여 전체 시스템을 모니터링 하도록 설계하였다. 본 연구에서는 MR 유체 댐퍼와 dsPIC 칩을 사용하여 세탁기의 탈수 과정 시 발생 되는 진동 및 소음을 저감 시키도록 세탁기용 진동 및 소음방지 시스템을 제안하고자 한다.

• 한국전자통신학회논문지
• /
• 제13권2호
• /
• pp.473-480
• /
• 2018

2012년에 에너지 하베스팅을 위한 새로운 에너지 획득 방안인 TENG가 제시되었다. 동작에 따라 마찰 혹은 진동으로 전력을 생산하는 TENG는 새로운 에너지 하베스팅의 발전방안으로 소자 측면에서 많은 연구가 되고 있다. 하지만, TENG는 높은 전압(Voltage)과 낮은 전류(Current)의 문제를 지닌다. 이에 따라서 에너지의 저장과 변환을 위한 반도체 소자 혹은 회로적인 다양한 접근방안이 요구된다. 특히 5Hz 이하의 비규칙적인 발전에서의 변환 저장 기술은 이론적 연구보다 많은 경험이 요구된다. 본 연구는 발전 플랫폼을 저장 기술과 함께 대형동물의 움직임에 따른 발전소자의 실시간 발전 정보를 능동적 BLE 제어를 이용하여 송수신하고 이를 검증하였다.