• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.65-67
• /
• 2007

In this paper describes the design and characteristic analysis of a novel 2-DOF(Degree of Freedom) motor. For multi DOF actuating, several numbers of motors have been used. But the using of normal motors they connected each other in single joint, have necessary to a several type of complex power transmission devices. The 2-DOF motor can drive pan, tilt motion in only one unit and it is not necessary to use additional gears and links parts. Therefore by the using of 2-DOF spherical motor ran eliminate; combined effects of inertia, backlash, non-linear friction, and elastic deformation of gears. The validity of the analysis is confirmed by 3D finite element method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.2
• /
• pp.120-127
• /
• 2008

The constant velocity joint(CVJ) used for transmitting torque to the front wheels is an important part in automotive drive system. There are several types of constant velocity joints. Typically, they are classified by fixed and plunging constant velocity joints. The axial force generated in plunging constant velocity joints influences significantly the noise, vibration and harshness. For heaps of time, many constant velocity joint markers have been studying and developing a valid method to reduce the axial force and extensive tests have been carried out on rigs. This paper presents the analysis method to predict the axial force of a double offset constant velocity joint(DOJ), a kind of plunging constant velocity joint, and the influence of ball-cage dimension tolerance on the axial force.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.5
• /
• pp.156-160
• /
• 2009

In an ultrasonic motor, a piezoelectric ceramic material forms the active element which vibrates the stator, thus initiating the rotational motion. In the operation of ultrasonic motors, many factors exist that can affect the resonance characteristics of the piezoelectric ceramic component. For examples, these factors are the bonding conditions with the piezoelectric element, the magnitude of the input voltage, the normal force in the frictional drive and the emission of heat due to vibration and friction etc. Therefore, it is important to research properly the inclination for variation of piezoelectric ceramics in the circumstance where complex elements are involved. In this paper, we focus on the analysis of the resonance characteristics of an ultrasonic motor as a function of the magnitude of the input voltage and the normal force.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.987-994
• /
• 2000

A Linear Pulse Motor (LPM) is a direct drive motor that has good performance in terms of accuracy, velocity and acceleration compared to the conventional rotating system with toothed belts and ball screws. However, since an LPM needs supporting devices which maintain constant air-gap and has strong nonlinearity caused by leakage magnetic flux, friction and cogging, etc., there are many difficulties in improvement on accuracy with conventional control theory. Moreover, when designing the position controller of LPM, the modeling error and load variations has not been considered. In order to compensate these components, the neural network with conventional feedback controller is introduced. This neural network of feedback error learning type changes the current commands to improve position accuracy. As a result of experiments, we observes that more accurate position control is possible compared to conventional controller.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.2
• /
• pp.25-28
• /
• 2011

The control rod assemblies do freely fall into the reactor core by the gravity from the control rod drive mechanism. In order to achieve a rapid shutdown and control the reactor power, it is required to insert control rod assemblies as soon as possible. In this paper, we evaluated the drop time and flow characteristics caused around guide tube for SMART(System-integrated modular advanced reactor) control rod assembly. Numerical analyses are carried out with FLUENT program of computational fluid dynamics. This study results show that the drop time of the control rod assembly in the operating condition of SMART is more 20 percent rapidly than the drop time of the room temperature and ambient atmosphere condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.156.5-156
• /
• 2001

Stabilized tracking platform in a missile consisting of a flat planar antenna, pitch/yaw gimbals, gear trains, and current controlled DC drive motors for pitch and yaw gimbal must have a capability to track a target as an inertial sensor in the presence of missile body motion such as maneuvering and vibration. Because of this reason, tracking a target from dynamic platform requires a servo architecture that includes a outer tracking loop(position loop) and inner rate loop that stabilizes the line of sight(LOS). This paper presents a gimbaled platform model including nonlinear phenomena due to viscous and Coulomb friction based on experimental data and torque equilibrium equation, the design concept for the inner tacholoop having P controller structure ...

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1-6
• /
• 1991

This paper is concerned with the design of a robust tracking controller using a state observer on a robotic manipulator under the disturbance. The controller is designed to follow a step or ramp reference input without steady state error in the presence of a disturbance and a system parameter variation. In most cases, since all the state vectors are not measured, unmeasurable state vectors must be estimated or reconstructed. A reduced order observer is proposed to estimate unmeasurable state vectors of the non-linear system. Some problems are caused by the Coulomb friction, the disturbance, and the spring effect of a link between the drive motor and the manipulator arm. The state variables, directly measured and estimated by the reduced order observer, are fed back to the controller. When the robot system exhibits the 'limit cycle, the feedback gains initially obtained by optimal control theory are changed. As a result, the limit cycle is eliminated by the new controller gains,

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1839-1844
• /
• 2003

In order to provide a tool for designing more efficient methods of mixing fabric, a simplified discrete element computational model was developed for modeling fabric dynamics in a rotating horizontal drum. Because modeling the interactions between actual pieces of fabric is quite complex, a simplified model was developed where individual pieces of bundled fabric are represented by spherical particles. The simulations are used to investigate fabric bundle kinematics, the power required to drive the rotating drum, and the power dissipated through normal and tangential contacts. Parametric studies indicate only fill percentage, drum rotation speed, and friction coefficient play significant roles in the fabric bundle dynamics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.463-467
• /
• 2003

The traveling system of wheel type excavator, that is applied to drive method by friction of transmission, has many problems about transmisson. It need to settle the problem which is occurred at wheel type excavator and to study continuously variable transmisson which is used with only travel motor. This paper base on mathmetical modeling for travel motor and travel motor of wheel type excavator is designed continuously variable transmisson system without transmisson by direct control method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.276-280
• /
• 1996

This paper presents an indirect method for on-line measuring the cutting forces in contour NC milling processes by using the current signals of the servo drive motors. A Kaluman filler is used for estimating each of the load torques to the x, y-axis servo motors of a horizontal machining center. Then, the load torque induced by the friction force in the guidewayis estimated and subtracted from the total extermal torque, thus resulting in the load torque induced by the cutting force. A series of experimental works on the circular interpolated contour milling process shows good agrement between the cutting forces measured by the dynamometer and those estimated by the method presented in the paper.