• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.90-96
• /
• 2008

Engineered mixtures composed of rigid sand particles and soft rubber particles are tested to investigate their behavior with strain level. Mixtures are prepared with different volumetric sand fractions (sf) to identify response using small strain resonant column, intermediate strain oedometer, and large strain direct shear tests. The small strain shear modulus and damping ratio are determined with volumetric sand fractions. The asymmetric frequency response curve increases with decreasing sand fraction. Linear responses of shear strain and damping ratio with shear strain are observed at the mixture of sf=0.2. Vertical strain increases with decreasing sand fraction. Mixtures with $04.{\leq}sf{\leq}0.6$ show the transitional stress-deformation behavior from rubber-like to sand-like behavior. The friction angle increases with the sand fraction and no apparent peak strength is observed in mixture without sf=1.0.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.603-608
• /
• 2001

A certain amount of MBS rubber was added to improve toughness of PVC which has a strong tendency of being brittle, producing a mixture, PVC/MBS, from which test specimens were prepared. PVC has strong chemical resistance, oil resistance, frame retardancy and high mechanical strength. Also, it is relatively inexpensive to produce, but shows weakness to impact and difficult for processing. MBS, a typical toughening agent for PVC is generally known, when added in a small amount, to improve impact resistance and to minimize difficulties during the processing of the PVC without adversely affecting the positive aspects of the PVC. In this investigation, attempts were made to observe and determine the variations in elastic and damping constants of the PVC depending on the amounts of MBS added to the mixture, PVC/MBS, and also on the thicknesses of the specimens. An acoustic resonance technique was used for the tests in this investigation. It serves as a method to characterize properties of materials set in vibrational motions, which is initiated by low level stresses generated by externally supplied acoustic energy. Substantial variations were observed in the test results with the addition of the MBS to the PVC. Generally, the magnitudes of elastic constants decrease while the damping capacity improves when MBS rubber was added.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.170-177
• /
• 1998

The purpose of superconducting magnetic bearing flywheel energy storage system(SMB-FESS) is to store unused nighttime electricity as kinetic energy and convert it to electricity during daytime. The SMB-FESS is proposed as an efficient energy storage system because there is no mechanical problems, such as friction and wear The flywheel over SMB is rotated at a high speed, 50,000rpm. The major source of energy loss in the SMB-FESS is vibration of flywheel. Therefore, the vibration characteristics of SMB-FESS should be identified. In this study, the axial/radial stiffness and damping coefficient of SMB are measured by a vibration test. Natural frequencies and natural modes of flywheel and magnet are analyzed by a finite element method. The modal analysis of system is performed using the modal parameters of each component and the measured stiffness/damping coefficient. So, natural at frequencies and mode shapes of the joined system can be obtained. According to critical speed analysis, the system has two rigid conical modes in the low speed range. Nevertheless, the system has not been affected by the critical speed in the main operating range.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.195-204
• /
• 2017

Analytical and experimental studies of the innovative pipe in pipe damper have been recently investigated by the authors. In this paper, by adding lead or zinc infill or slit diaphragm inside the inner pipe, it is tried to increase the equivalent viscous damping ratio improving the cyclic performance of the recently proposed multi-level control system. The damper consists of three main parts including the outer pipe, inner pipe and added complementary damping part. At first plastic deformations of the external pipe, then the internal pipe and particularly the added core and friction between them make the excellent multi-level damper act as an improved energy dissipation system. Several kinds of added lead or zinc infill and also different shapes of slit diaphragms are modeled inside the inner pipe and their effectiveness on hysteresis curves are investigated with nonlinear static analyses using finite element method by ABAQUS software. Results show that adding lead infill has no major effect on the damper stiffness while zinc infill and slit diaphragm increase damper stiffness sharply up to more than 10 times depending on the plate thickness and pipe diameter. Besides, metal infill increases the viscous damping ratio of dual damper ranging 6-9%. In addition, obtained hysteresis curves show that the multi-level control system as expected can reliably dissipate energy in different imposed energy levels.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.1-10
• /
• 2021

Gears, which rotate and transmit power by interlocking two cogwheels, were invented in BC. They have been used in various systems, including industrial machinery, transportation devices, and living facilities, through the industrial revolution. Regardless of how they are used, gears are a major source of noise and vibration. Many effective measures are being taken to reduce the radiation noise generated from gears, most commonly by lubrication. Lubrication in gear units reduces friction on interlocking gear surfaces, dampening radioactive noise. This can be very useful for quiet gear design if these lubricating damping effects can be reflected in the analytical phase for gear design. This study experimentally confirms the properties of lubricated and non-lubricated radioactive noise by designing a decelerator gearbox and analyzing the radioactive noise characteristics by torque, rotation, and the number of gears using computer analysis.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.171-181
• /
• 2017

2상 횡 유동은 응축기, 증발기와 원자력의 증기 발생기와 같은 열교환기의 튜브와 셀 사이에 존재한다. 공기/물의 2상 유동에 놓인 관군에 작용하는 항력을 실험적으로 평가하였다. 2상 유동에 놓인 관군은 정사각형 배열이다. 피치 직경 비는 1.35이었고, 실린더의 직경은 18 mm이다. 관군에 유동방향으로 작용하는 항력을 측정하여 항력계수와 2상 유동 감쇠비를 계산하였다. 2상 유동 감쇠비는 균질 2상 유동의 이론식을 사용하여 구하여 실험의 결과와 비교하였다. 압력과 항력의 상관계수를 실험결과를 고려하여 평가하였다. 상관계수는 이론적으로 항력을 계산할 때에 사용된다. 질량유량을 증가할수록 측정된 항력으로부터 구한 항력계수와 감쇠비가 균질 유동의 이론적 결과와 잘 일치함을 보이고 있다. 결과적으로 충분히 큰 질량 유량의 기포 유동인 경우에는 감쇠비를 균질 유동에 근거한 이론식으로 계산할 수 있다.

• 토지주택연구
• /
• 제3권4호
• /
• pp.407-413
• /
• 2012

이 연구에서는 국내 아파트 건물의 주요 횡력저항시스템인 전단벽식 구조를 대상으로 제진장치의 적용 가능성을 검토해 보았다. 연구목적 달성을 위하여 ASCE/SEI 7-10 제진구조물 설계방법을 현재 설계 중이거나 이전에 설계된 4개의 대표적인 전단벽식 아파트에 적용하여 내진성능 확보를 위하여 요구되는 제진장치의 성능에 대하여 조사하였다. 연구결과, 전단벽식 아파트에 제진장치를 이용하여 내진성능을 확보하기 위해서는 탄성강성이 높은 전단벽의 영향으로 인하여 제진장치의 강성이 매우 커야 함을 알 수 있었다. 이와 같은 높은 강성의 제진장치는 현실적으로 구현하기 매우 어려울 수 있으므로 전단벽식 건물에 제진장치를 설계할 때 주의하여야 하며, 벽량이 많은 전단벽식 건물의 경우 강재이력형 제진장치의 적용에 한계가 있는 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.141-148
• /
• 2000

방글라데시의 자무나 강을 가로지르는 길이 4.8km 교량의 교각기초에 대구경 개단 강관말뚝 2본 또는 3본이 사용되었다. 총 50개의 교각과 시험용 말뚝 2본을 포함한 123본의 말뚝이 강 하저에서 정규압밀된 모래층을 지나 자갈층 위까지 항타하여 설치되었다. 두께 40mm 내지 60mm의 변단면을 갖는 직경 3.15m와 2.50m의 짧은 말뚝 2, 3개를 연결하여 69m에서 74m 깊이까지 6:1의 경사로 항타하여 시공하였다. 전체 123본의 말뚝에 대하여 항타후 관내토 길이를 측정하였고, 이중 24본의 말뚝들에 대해서는 항타시 동재하시험을 수행하였다. 말뚝 항타완료후 측정한 결과에 의하면, 선단부 근처에서는 주동 관내토(Active Plug)가 주면마찰력 발현에 크게 기여한 것으로 나타났다. 시험한 모든 말뚝들은 약 90% 정도의 지지력이 주면마찰력에 기인하는 주면마찰지지형 말뚝으로 나타났다. 현장모래지반에서의 탄성변형량(Quake)값과 감쇠계수(Smith Damping)값은 직경에 상관없이 일정하게 나타났는데, 이는 주변 지반의 균질함이 잘 반영된 것으로 판단되었다.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1969-1977
• /
• 2004

To model and understand the physics of partial rub, a nonlinear rotor model is sought by applying a nonlinear parameter identification technique to the experimental data. The results show that the nonlinear terms of damping and stiffness should be included to model partial rotor rub. Especially, the impact and friction during the contact between rotor and stator are tried to explain with a nonlinear model on the basis of experimental data. The estimated nonlinear model shows good agreements between the numerical and the experimental results in its orbit. Also, the estimated nonlinear model could explain the backward whirling orbit and jump phenomenon, which are the typical phenomena of partial rub.

• Structural Engineering and Mechanics
• /
• 제57권4호
• /
• pp.703-716
• /
• 2016

In this paper, we have investigated shear horizontal wave propagation in a layered structure, consisting of granular macromorphic rock (Dionysos Marble) substrate underlying a viscoelastic layer of finite thickness. SH waves characteristics are affected by the material properties of both substrate and the coating. The effects of microstructural parameter "characteristic length" of the substrate, along with heterogeneity, internal friction and thickness of viscoelastic layer are studied on the dispersion curves. Dispersion equation for SH wave is derived. Real and damping phase velocities of SH waves are studied against dimensionless wave number, for different combinations of various parameters involved in the problem.