• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1999.10a
• /
• pp.221-223
• /
• 1999

The adsorption and leaching of organophosphorus pesticide, EPN are investigated in Namwon soil(black volcanic soil), Aewol soil(very dark brown volcanic soil) and Mureung soil(dark brown nonvolcanic soil) sampled in Cheju Island. The organic matter of Namwon soil, Aewol soil and Mureung soil is 19.8%, 6.2%, 2.4%, respectively. The cation exchange capacity of Namwon soil, Aewol soil and Mureung soil is 24.8 meq/100g, 13.0 meq/100g, 9.5 meq/100g, respectively. The Freundlich constant, K value, is 89.4, 26.9 and 9.25 for Namwon soil, Aewol soil and Mureung soil, respectively. The K value of Namwon soil with very high organic matter content and cation exchange capacity was the highest for Aewol soil and Mureung soil. The Freundlich constant, 1/n, show a high correlation with organic matter content, i.e., it is less than unity for organic matter rich soil of Namwon soil and greater than unity for organic matter poor soil of Mureung soil. The leaching of EPN is slower for Namwon soil with high K values, and faster for Mureung soil with low K values. The results of the study is demonstrated the potential of pollution for EPN have little leached into soil environment.

• Journal of Environmental Science International
• /
• v.6 no.3
• /
• pp.285-291
• /
• 1997

In order to Investigate the adsorption characteristics of organochlorine pesticides chlorothaloul and dicofol with soul colors and re참tons far souls of an orange orchard, the souls were sampled at 3 re삼tons, respectively. among black volcanic, dark brown volcanic, and broom nonvolcanlc sorts. Every so6 has a higher clay proportion (49-75%) In sol tcuture and the organic carbon content and cation ekchange capacity with soil decreased in the following sequence: Black volcanic > Dark brown volcanic > Brown nonvolcanic sorts. Especially those In black volcauc trolls were much higher than others. The retention time, quantitative detection limit, and extractian , efficiencies of chlorothalonil and dicofol were 2.82min, 1.5ng/mL, 93.6% and 3.64min, 4.5ng/mL. 94 2%, repectlvely. The Freundlich constant, Kd, was higher in dicofol compared to chlorothalonil and In the black volcanic souls that have higher organic carbon content and cation Bkchange capacity. The Freundlich constant, 1 In, was In the range of 0.76-0.89 In the black volcanic sorts that have a higher organic matter(16.4-19.8%), whereas It was In the range of 1.02-1.13 In the brown nonvolcanic souls that have a lower organic matter(2.4-3.4%), and so It was considered that 1 In was dependent on the organic matter.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.533-540
• /
• 2010

An activated carbon was tested for its ability to remove transition metal ions from aqueous solutions. Physical, chemical and liquid-phase adsorption characterizations of the carbon were done following standard procedures. Studies on the removal of Ni(II), Cu(II) and Fe(III) ions were attempted by varying adsorbate dose, pH of the metal ion solution and time in batch mode. The equilibrium adsorption data were fitted with Freundlich and Langmuir and the isotherm constants were evaluated, equilibrium time of the different three metal ions were determined. pH was found to have a significant role to play in the adsorption. The processes were endothermic and the thermodynamic parameters were evaluated. Desorption studies indicate that ion-exchange mechanism is operating.

• Advances in environmental research
• /
• v.2 no.4
• /
• pp.309-321
• /
• 2013

High AA new high capacity sorbent for preconcentration and determination of nickel in environmental samples was synthesized. The sorbent was synthesized by copolymerization of allyl glaycidyl ether / imminodiacetic acid with N,N-dimethylacrylamide as functional monomers in the presence of N,N-bismethylenacryl amid as cross linker and characterized by Fourier transform infra red spectroscopy, elemental analysis, thermogravimetric analysis and scanning electron microscopy. A recovery of 93.6% was obtained for the metal ion with 0.1 M, sulfuric acid as the eluting agent. The sorption capacity of the functionalized sorbent was 55.9 $mgg^{-1}$. The equilibrium sorption data of Ni(II) on polymeric sorbent were analyzed using Langmuir, Freundlich, Temkin and Redlich.Peterson models. Based on equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined 0.87 (L mg-1), 25.87 ($mgg^{-1}$) $(Lmg^{-1})^{1/n}$ and 171.4 ($Jmol^{-1}$) respectively at pH 4.5 and $20^{\circ}C$.

• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1173-1179
• /
• 2003

Laboratory sorption isotherm batch studies have been attempted to elucidate interaction of synthetic pyrethroids (bifenthrin and permethrin) with sediments and their fractions. As a nonlinear isothermal model, the Freundlich equation was applied to sorption results obtained from sediments to investigate the relationship between synthetic pyrethroids and sediments containing different amounts of organic carbon. Results demonstrated that the sorption capabilities of bifenthrin and cis- and trans-permethrin was in the order of bifenthrin, cis-permethrin and trans-permethrin, respectively, indicating that adsorbed bifenthrin was the most stable followed by cis- and trans-permethrin in all sediments. Their sorption capability was closely related to organic carbon contents in sediments. Higher sorption was observed in sediments containing higher organic carbon contents. Sorption study extended into the fractions, clay and humic acids, extracted from a sediment, indicated that higher sorption capacity in humic acids occurred than in the clay of both examined bifenthrin and permethrin. This study demonstrates the sorption of synthetic pyrethroids with sediments, and will help in the understanding of the transport and fate of synthetic pyrethroids existing in field sediments.

• Carbon letters
• /
• v.8 no.3
• /
• pp.199-206
• /
• 2007

The activated carbon produced from rubber wood sawdust by chemical activation using phosphoric acid have been utilized as an adsorbent for the removal of Cu(II) from aqueous solution in the concentration range 5-40 mg/l. Adsorption experiments were carried out in a batch process and various experimental parameters such as effect of contact time, initial copper ion concentration, carbon dosage, and pH on percentage removal have been studied. Adsorption results obtained for activated carbon from rubber wood sawdust were compared with the results of commercial activated carbon (CAC). The adsorption on activated carbon samples increased with contact time and attained maximum value at 3 h for CAC and 4 h for PAC. The adsorption results show that the copper uptake increased with increasing pH, the optimum efficiency being attained at pH 6. The precipitation of copper hydroxide occurred when pH of the adsorbate solution was greater than 6. The equilibrium data were fitted using Langmuir and Freundlich adsorption isotherm equation. The kinetics of sorption of the copper ion has been analyzed by two kinetic models, namely, the pseudo first order and pseudo second order kinetic model. The adsorption constants and rate constants for the models have been determined. The process follows pseudo second order kinetics and the results indicated that the Langmuir model gave a better fit to the experimental data than the Freundlich model. It was concluded that activated carbon produced using phosphoric acid has higher adsorption capacity when compared to CAC.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.691-698
• /
• 2016

This study was carried out to investigate the characterization of iron oxide nanotubes (INTs) by anodization method and applied adsorption isotherms and kinetic models for phosphate adsorption. SEM analysis was conducted to examine the INTs surface formation. Further XRD and XPS analysis were performed to observe the crystal structure of INTs before and after phosphate adsorption. AFM analysis was conducted to determine of Fe foil surface before and after anodization. Phosphate stock solution for adsorption experiment was prepared by $KH_2PO_4$. The batch experiment was conducted using 20 ml phosphate stock solution and $40cm^3$ of INTs in 50 ml conical tube. Adsorption isotherms were applied Langmuir and Freundlich models for adsorption equilibrium test of INTs. Pseudo first order and pseudo second order models were applied for interpretation of adsorption rate by reaction time. The determination coefficient ($R^2$) values of Langmuir and Freundlich models were 0.9157 and 0.8876 respectively.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.216-221
• /
• 2016

The adsorption characteristics of mixed heavy metals (Cr(III), As(VI)) in aqueous solution were investigated using a sediment amendment composite. Sediment amendment composite was composed of clean sediment (40%), zeolite (20%), recycled aggregate (10%), steel slag (10%), oyster shell (10%), and cement (10%). The experimental results showed that the adsorption equilibrium was attained after 180 mins. Heavy metal adsorption was characterized using Freundlich and Langmuir equations. The equilibrium adsorption data for the sediment amendment composite better fitted with the Langmuir model than the Freundlich model. The maximum adsorption capacity of Cr(VI) (36.07 mg/g) was higher than As(III) (25.54 mg/g); and the adsorption efficiency of the Cr(VI) and As(III) ions solution decreased with decreasing pH from 2 to 10. The collective results suggested that the sediment amendment composite is a promising material for a reactive cap that controls the release of Cr(VI) and As(III) from contaminated sediments.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.

• Journal of Environmental Science International
• /
• v.28 no.8
• /
• pp.677-687
• /
• 2019

This study evaluated the biosorption properties of calcium ion using Aerobic Granular Sludge (AGS). A sequencing batch reactor was used to induce the production of Extracellular Polymeric Substances (EPS) through salinity injection, and the calcium ion adsorption efficiency was analyzed by a batch test. The EPS contents showed significant changes (104-136 mg/g MLVSS) at different salinity concentrations. The calcium ion adsorption efficiency was highest for AGS collected at 5.0% salinity, and it was confirmed that the biosorption efficiency of AGS was increased owing to the increase in EPS content. The results of the Freundlich isotherms showed that the ion binding strength (1/n) was 0.3941-0.7242 and the adsorption capacity ($K_f$) was 2.4082-3.3312. The specific surface area and the pore size of the AGS were $586.1m^2/g$ and 0.7547 nm, respectively, which were not significantly different from each other. It was confirmed that the influence of biological properties, such as EPS content, was relatively large among the factors affecting calcium ion adsorption.