• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.5
• /
• pp.341-345
• /
• 2009

Continuous dry anaerobic digestion of organic solid wastes (30% TS, Total Solids) comprised of food waste and paper was performed under mesophilic condition. During the operation, hydraulic retention time (HRT) was decreased as follows: 150 d, 100 d, 60 d, and 40 d, which corresponded to the solid loading rate of 2.0, 3.0, 5.0, and 7.5 kg TS/$m^3$/d, respectively. Volumetric biogas production rate ($m^3$/$m^3$/d) increased as HRT decreased, and the highest biogas production rate of 3.49${\pm}$0.31 $m^3$/$m^3$/d was achieved at 40 d of HRT. At this HRT, high volatile solids (VS) reduction of 76% was maintained, and methane production yield of 0.25 $m^3$/kg $TS_{added}$ was achieved, indicating 67.4% conversion of organic solid waste to bioenergy. The highest biogas production yield of 0.52 $m^3$/kg $TS_{added}$ was achieved at 100 d of HRT, but it did not change much with respect to HRT. For the ease feed pumping, some amount of digester sludge was recycled and mixed with fresh feed to decrease the solid content. Recirculation volume of 5Q was found to be the optimal in this experimental condition. Specific methanogenic activity (SMA) of microorganisms at mesophilic-dry condition was 2.66, 1.94, and 1.20 mL $CH_4$/g VS/d using acetate, butyrate, and propionate as a substrate, respectively.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.236-242
• /
• 2008

We investigated the optimum concentration of a $NaClO_2$ solution and the amount of gaseous $Cl_2$ for production of high yield and purity of aqueous $ClO_2$ by use of a gaseous chlorine-chlorite $ClO_2$ generator. This system produced lower concentrations of chlorine dioxide and is applicable for direct-use in food processing as a cleaner and sanitizer. The concentration of $NaClO_2$ solution and the amount of gaseous $Cl_2$ was varied from 0.01-0.1% and 100-1,000 g/hr, respectively. The concentrations of chlorite, chlorate, FAC (free available chlorine), and chlorine dioxide that were produced increased with increasing concentration of $NaClO_2$ solution and with the amount of gaseous $Cl_2$. The optimum concentration of $NaClO_2$ solution and amount of gaseous $Cl_2$ were 0.1% and 900 g/hr respectively. $ClO_2$ and FAC produced at these concentrations were 882.0 ppm and 8.0 ppm, with no detection of chlorite and chlorate. The yield and purity of $ClO_2$ were 97.0% and 96.0% respectively. Immersion-cleaning experiments showed that this protocol decreased the level of CFU/g by $10^3$- to $10^4$-fold, with a similar effect on fruit.

• Korean Journal of Plant Resources
• /
• v.33 no.5
• /
• pp.419-427
• /
• 2020

Ligusticum chuanxiong Hort. is included in Umbelliferae family, it is one of the Korean traditional medicinal plants as the roots have been used to treat diseases. In this study, the growth characteristics and active compound contents of L. chuanxiong were compared among the different forest sites. As a result, root diameter and root length of L. chuanxiong was the highest in Jeongseon. Also, the fresh weight and dry weight of L. chuanxiong were the highest in Jeongseon. The total content of active compound was 23.27 mg/g the highest in Bonghwa, and 21.59 mg/g in Jeongseon, 15.87 mg/g in Hamyang was accumulated. In this study compares three forest site for cultivating of L. chuanxiong in different climate zone that the best site to product yield were Jeongseon. In this sites were located in higher altitue and lower temperature than other sites, also there were shown that lower soil moisture contents and well-drained soil. It was shown yield and active compound contents of L. chuanxiong was influenced by micro-environment conditions like as altitude, temperature, soil conditions.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.89-94
• /
• 2003

This study was conducted to identify the effect of recycling method of drained solution on the concentration of drained solution, and growth and yield of tomato in the recycling system. The recycling methods of drained solution were composed of control, MEC (measurement of EC) and ANS (analysis of nutrient solution). The plant height in the early growth stage was not different among the treatments, but plant fresh weight and dry weight were higher in the MEC or the ANS than in the control. The growth including fruit number, fruit weight, and yield of tomato in the ANS as compared with the control was favorable. The EC of drained solution tended to decrease in the early growth stage, but that of drained solution increased in the late growth stage. It was low in the MEC and the ANS as compared with the control. The pH of drained solution was maintained by 6.2 to 6.5 throughout the growth period in the MEC and the ANS, but the pH of the control increased up to 7.2 at the late growth stage. The N and K concentrations of drained solution tended to decrease in the early growth stage, while those of P, Ca and Mg increased. In the late growth stage, concentrations of N, P, Ca and Mg tended to decrease, but that of K in the ANS was very low. Concentrations of N, P, K, Ca and Mg were lower in the MEC and the ANS than in the control.

• Journal of Plant Biotechnology
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1999

Large-scale cultures of plant cell, tissue, and organ have been achieved by using BTBB. When different sized BTBBs (5 L, 20 L, 100 L, 300 L, and 500 L) were tested for the culture of yew cells (Taxus cuspidata Sieb. et Zucc.), cell growth increment reached to 94.5% in SCV after 24 days of culture with 30% of inoculation cell density. However, there were some variations in the production of taxol and its derivatives among the BTBBs of different size. Approximate 4 ㎎/l of taxol and 84 ㎎/l of total taxanes were obtained by using a 500L BTBB after 6 weeks of culture. With a 20L BTBB, about 20,000 cuttings of virus-free potatoes (cv. Dejima) could be obtained by inoculating 128 explants and maintaining 8 weeks under 16 hr light illumination. The frequency of ex vitro rooting of the cuttings revealed as more than 99% under 30% shade. By incorporating two-stage culture process consisting of multiple bulblet formation in solid medium and bulblet development in liquid medium, mass propagation of lily through bioreactor seemed to be possible. In the case of 'Marcopolo', the growth of mini-bulblets in BTBB was nearly 10 folds faster than that of the solid medium. Time course study revealed that maximum MAR yield of ginseng (Panax ginseng C. A. Meyer) in a 5 L and 20 L BTBB after 8 weeks of culture was 500 g and 2.2 ㎏, respectively. By cutting the MAR once and/or twice during the culture, the yield of root biomass could be increased more than 50% in fresh weight at the time of harvest. With initial inoculum of 500 g of sliced MAR in a 500 L BTBB, 74.8 ㎏ of adventitious root mass was obtained after 8 weeks of culture. The average content of total ginseng saponin obtained from small-scale and/or pilotscale BTBBs was approximately 1% per gram dry weight. Based on our results, we suggest that large-scale cultures of plant cell, tissue, and organ using BTBB system should be quite a feasible approach when compared with conventional method of tissue culture.

• Korean Journal of Organic Agriculture
• /
• v.8 no.3
• /
• pp.99-109
• /
• 2000

This experiment was conducted to investigate the changes of rate of infected common scab and yield characteristics of fall potato(Solanum tuberosum L.) where green manual crops had been previously cultivated, crushed and tilled and P\ulcornerE transparent vinyl film had been mulched and tunneled to solar heating of soil from May 21. 1998 to July 28. 1998. The total yields of green manual crops which had been previousely cultivated were as followed order : pioneer 855F(64.3MT/ha), soybean(25.0MT/ha), red clover and orchardgrass. The average below-ground temperature at the depths of 5, 10 and 20cm were 54, 45 and 44$^{\circ}C$ during the mulching period, respectively The rate of infected area per potato tuber of common scab decreased by solar heating the soils with mulching after the soybean and red clover cultivation as with previous croppings. Plant height, SPAD(soil plant analysis development) reading, fresh weight of stems, and fall potato's tuber yields tended to increase by the cultivation of green manual crops and mulching of P\ulcornerE film. Fall potato's tuber yields were remarkably affected in the plot of soybean, red clover and pioneer 855F+cultivation of fall potato. T-N, K and Ca contents of fall potato(stem and tuber) also tended to increase by the cultivation of green manual crops and mulching of P\ulcornerE film. T-N, K and Ca contents of soil tended to increase after the cultivation of green manual crops and mulching of P\ulcornerE film and then reduced to contents of soil before green manual planting after potato harvesting.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.433-440
• /
• 2005

Four varieties of perilla(Perilla ocimoids L.) were tested to investigate the ecological adaptation of the crop to variations in sowing time extending from April 25 to July 25 with an interval of 30 days between each of the four sowing. As sowing time was delayed, the plant height, the number of first branches and cluster, the weight of fresh and dried stems, the day to germination and flowering decreased, showing a highly negative correlation between the showing dates and these characteristics, but a highly positive correlation between days to flowering and the required accumulated temperature. With early sowing under low temperature and long day conditions, it took about 132 days from sowing to flowering due to the long period of vegetative growth, but as sowing was delayed, the days to flowering decreased with a minimum period of 57 days. The yield of seeds in each case varied with each variety. Type A(Nonsan var.) and type B(Jinchon var.) had higher yields when sowed earlier. But type C(Namyang var. and Wooljin var.) had its highest yield in the plot sowed on May 25 and the 1000 grain weight showed a tendency to increase as sowing was delayed. In conclusion, the perilla was preyed to be a short-day plant that flowers from the begining to the middle of Sep. regardless of sowing time, so that the sowing time should be decided after due consideration of the length of the vegetative growth periods of the varieties.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.149-154
• /
• 1992

A study was carried out to know the effects of two kinds of paper mill sludge manure compost(SMC) on the growth and chemical components of kidney bean(Phaseolus vulgaris) : Control(SMC-0) contained chemical fertilizer only, sludge manure compost-1(SMC-1) contained 18% of swine manure and 8% of sawdust of the total weight of the manure in addition to the chemical fertilizer, and sludge manure compost-2(SMC-2) contained swine manure without sawdust a third of the total by weight on a fresh weight basis, 1) Kidney bean treated with SMC-1 and SMC-2 showed the increasing tendency of values meristem height, stem diameter, pod number per plot and total grain yield when compared to control(SMC-0) treatment 2) Though there was not a significant difference between SMC-1 and SMC-2 treatments on the growth, SMC-1 tended to increase the value of meristem height, stem diameter, pod number per plot and total grain yield of kidney bean, 3) The contents of aluminium, iron and zinc in kidney bean were higher than other elements, though there was no significant difference between the treatments, And those of chromium, lead and cadmium were negligible. 4) From the results obtained, it can be said that SMC application has more favorable effects on the growth of the plant than control(SMC-0). The effects of SMC-1 application on the growth of kidney bean was more favorable than those of SMC-2.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.397-403
• /
• 2014

This study was conducted to investigate extract, total phenolic compounds, total flavonoid compounds, free radical scavenging activities (DPPH assay, ABTS assay), and reducing power (Oyaizu's assay, FRAP assay) of soybean sprout according to cooking process (non-blanched, blanched, seasoned). This research was carried out in order to demonstrate the superiority of Korean traditional cooking methods 'Namul'. Soybean sprout sample extracts were prepared using 80% ethanol extraction. Extract yield of non-blanched soybean sprout was 1.42% while that of blanched soybean sprout was 0.65%. On the other hand, the yield of seasoned soybean sprout was 6.50%. Total contents of phenolic compound and total flavonoid seasoned soybean sprout were $79.52{\pm}1.41$ mg GAE/100 g FW (fresh weight) and $6.21{\pm}0.16$ mg CE/100 g FW, respectively. Seasoned soybean sprout extracts showed higher contents compared to non-blanched and blanched sprout extracts. Total antioxidant activities were in the order of seasoned soybean sprout > non-blanched soybean sprout > blanched soybean sprout. The overall results of this study demonstrate that cooked soybean sprout by seasoning would be the most efficient way to ingest antioxidant compounds.

• Advances in environmental research
• /
• v.6 no.3
• /
• pp.159-171
• /
• 2017

A successful oil well drilling depends largely on a good mud Program. During drilling, mud provides sufficient hydrostatic pressure, removes drill cuttings and cools drill bits. Mud additives are always required to provide sufficient hydrostatic pressure to ensure borehole stability. Barium Sulphate ($BaSO_4$) also known as barite is the prevalent weighting material but there is needed to develop local materials to augment the use of Barite. The present search is concerned on the early Carboniferous succession exposed in Um Bogma Formation, west central Sinai, Egypt as a new weighting agent in drilling fluids. The increases in the cost of drilling fluids and a shortage of using barite have introduced the locale dolomite as alternative weighting materials. The rheological properties of mud drilling samples weighted by local dolomite samples are being examined and investigated to know its potential to be used as a weighting material in drilling mud. Two mud samples were prepared which comprised of fresh water, caustic soda, bentonite and the weighting material. The weighting materials are added to achieve the required density. The first sample: Water-based mud with commercial barite of density between 10.00 lb/gm and 18.00 lb/gm. The second sample: Water-based mud with dolomite of density between 10.00 lb/gm and 18.00 lb/gm. These samples were analyzed and the density, rheological properties, aging of barite and dolomite and solid contents were investigated. At 10.00 lb/gm, the yield point of dolomite was $20.00lb/100ft^2$ and barite $22.00lb/100ft^2$ while the 10 second gel strength of dolomite was $30.00lb/100ft^2$ and $22.00lb/100ft^2$ for barite. Similarly, little difference was observed in plastic and apparent viscosities. At 10.00 lb/gm, the plastic and apparent viscosities of dolomite were 8.00 cp and 20.00 cp while barite was 8.00 cp and 24.00 cp. The result show that dolomite mud sample gave a little higher yield point and gel strength than barite mud sample. Therefore, dolomite has the potential to be used as weighting material in drilling mud in place of barite thereby enhancing the local content initiative of the government. When dolomite is sourced locally and used it will reduce overall mud and drilling costs.