• 한국건설순환자원학회논문집
• /
• 제1권1호
• /
• pp.89-97
• /
• 2005

최근 천연골재 자원의 고갈과 환경규제의 강화로 인해 콘크리트용 잔골재의 수급문제가 건설산업분야에서 시급히 해결해야할 문제로 대두되고 있어 폐기콘크리트를 활용한 재생잔골재의 콘크리트용 잔골재로의 활용을 위한 연구가 활발히 진행되고 있다. 한편 화학발전소 및 열병합발전소에서 발생되는 석탄회는 그 발생량이 계속적으로 증가하고 있으며, 석탄회중 플라이애시를 콘크리트용 혼화재료로서 사용할 경우 시공성 및 점성 개선, 장기강도 증가 및 수화열 저감 등 많은 장점으로 인하여 보통 콘크리트에서의 활용이 증가하고 있는 실정이나, 재생콘크리트의 혼화재로 활용하기 위한 연구는 미미한 실정이다. 따라서 본 연구에 서는 재생잔골재 및 플라이애시 대체율에 따른 굳지않은 특성, 경화특성, 내구특성을 실험 실증적으로 검토 분석함으로서 재생잔골재를 콘크리트용 잔골재로 활용할 수 있을 뿐만 아니라 플라이애시를 재생콘크리트의 혼화재로 활용하기 위한 기초자료를 제시하고자 하였다. 연구 결과 재생잔골재를 대체한 경우 굳지않은 성상, 정화성상 및 내구성상이 재생잔골재 100%을 치환했을 때 천연잔골재를 사용한 콘크리트와 유사한 수준으로 나타나 콘크리트용 잔골재로서 재생산골재의 활용이 가능한 것으로 사료되었으며, 플라이애시를 고품질 재생잔골재를 사용한 재생콘크리트용 혼화재로 활용함으로서 시공성, 공학적 특성 및 내구특성 등의 성능이 향상되는 것을 확인할 수 있었다.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.569-579
• /
• 2005

본 연구는 부산의 동부, 중부, 서부지역을 대표하는 양산, 김해, 진해에서 생산된 부순모래를 사용한 부순모래 콘크리트의 장기강도 특성에 관한 연구를 수행하였다. 콘크리트는 전체 체적의 70~80%가 골재로 이루어져 있어 콘크리트의 특성에 골재의 품질의 영향은 매우 중요하다. 1980년대 이후, 천연자갈과 천연모래의 고갈로 콘크리트에 사용되어지는 골재는 이미 부순돌로 대체되었다. 부순모래는 해사 채취금지와 강모래의 고갈로 사용량이 증가하고 있는 경향이다. 부순모래는 혼입량의 변화와 부순모래의 혼합비(50, 60, 70, 80, 90, 100%)의 변화에 따른 콘크리트의 특성을 조사하기 위하여 강모래와 혼합하였다. 경화하지 않은 콘크리트의 성질을 조사하기 위해 슬럼프와 공기량을 측정하였다. 경화한 콘크리트의 성질을 조사하기 위해 재령 7, 28, 60, 90, 180일에 단위중량, 압축강도 그리고 탄성계수를 측정하였다. 압축강도, 단위중량 그리고 탄성계수는 재령의 증가에 따라 값이 증가하였으며 장기 재령에서도 역시 증가할 것으로 예상된다. 지역별 골재의 품질 시험결과들은 모두 KS규격을 만족하였다. 슬럼프 측정결과는 혼입률 70~80%까지는 증가하였으나 그 이상에선 감소하였다. 공기량은 마이크로 필러 현상에 의해 부순모래의 혼입률 증가에 따라 감소하였다. 재령 7, 28, 60, 90, 180일에 단위중량을 측정한 결과에 따르면, 단위중량은 부순골재의 혼입률 증가에 따라 역시 증가하였다. 재령 7, 28, 60, 90, 180일에 압축강도와 탄성계수를 측정한 결과, 압축강도는 혼입률 70%일 때 가장 높게 나타났다.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.149-156
• /
• 2018

This paper investigated the influence of binary and ternary blends of mineral admixtures in self-compacted mortar (SCM) on the fresh, mechanical and durability properties. For this purpose, 25 mortar mixtures were prepared having a total binder content of $640kg/cm^3$ and water/binder ratio between 0.41 and 0.50. All the mixtures consisted of Portland cement (PC), fly ash (FA) and silica fume (SF) as binary and ternary blends and air-entrained admixture wasn't used while control mixture contained only PC. The compressive and tensile strength tests were conducted for 28 and 91 days as well as slump-flow and V-funnel time tests whilst freeze-thaw (F-T) resistance and capillary water absorption tests were made for 91-day. Finally, in general, the use of SF with FA as ternary blends improved the tensile strength of mortars at 28- and 91-day while the use of SF15 with FA increased the compressive strength of the mortars compared to binary blends of FA. SCM mixtures with ternary blends had lower the sorptivity values than that of the mortars with binary blends of FA and the control mixture due to the beneficial properties of SF while the use of FA with SF as ternary blends induced the F-T resistance enhancement.

• The Journal of Korean Physical Therapy
• /
• 제10권1호
• /
• pp.173-179
• /
• 1998

To overcome obstacles and to attain the goals of practical training for the students in the department of physical therapy it is necessary to effective an effective system for practical training. And to develop a good System it is essential to monitor the response of the students in practical training of physical therapy and to gather fundamental data. The author made up a questionnaire to the students in the department of physical therapy after the end of practical training course. The questionnaire consisted of 13 questionnaire for the general characterisitcs of the students, 19 questions for the degree of satisfaction (4 for the environment of practical training, 4 for the environment of practical training, 4 for the content 3 for the time assignment and 4 for the evaluation) and one open question. As results the students were satisfied with the practicality and fresh experience. But they were relatively unsatisfied with the environment of the practical training and the number and sincerity of the trainers. Especially they were dissatisfied with the correspondence with the objectives of education, conection with the lecture, communication with the trainers, time assignment and evaluation. As a Part of efforts to formulate an effective system fer practical training it is necessary to estabilish concrete goals and detail check lists to guide both trainers and students.

• 한국전자통신학회논문지
• /
• 제13권3호
• /
• pp.623-632
• /
• 2018

본 연구는 하천 저수구역에 대하여 하천의 부유쓰레기를 탐지하고, 이때 동시에 분광라이브러리 특성들을 분석하여 효율적인 하천환경관리기술의 기초자료로 활용하는데 목적을 두었다. 부유쓰레기 탐지 구간으로 달성보-강정고령를 중심으로 현장 조사 계획을 수립하였다. 분광반사측정은 하천 주변의 식생(초지, 수목 등), 인공물(콘크리트, 구조물 등), 하천수(청수, 탁수, 녹조), 하천 주변에 산재되어 있는 하천 부유쓰레기를 대상으로 하였으며 그리고 동시에 현장에서 조사된 하천 부유쓰레기들에 대한 분광라이브러리 특성들을 각각 분석하였다.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.283-290
• /
• 2017

The aim of this study is to investigate the effect of the bond strength of self-compacting mortars (SCMS) produced from ground pumice powder (GPP) as a mineral additive. In this scope, six series of mortars including control mix were prepared that consist of 7%, 12%, 17%, 22% and 27% of ground pumice powder by weight of cement. A total of 54 specimens of $40{\times}40{\times}160mm$ were produced and cured at the age of 3, 28 and 90-day for compressive and tensile strength tests and 18 specimens of $150{\times}150{\times}150mm$ mortar were prepared and cured at 28 days for bond strength tests. Flexural tensile strength and compressive strength of $40{\times}40{\times}160mm$ specimens were measured at the curing age of 7, 28 and 90-day. Mini V-funnel flow time and mini slump flow diameter tests were also conducted to obtain rheological properties. As a result of the study, it was observed that the SCMs containing 12% of GPP has the highest bond strength as compared to control and GPP mortars. Compressive strength slightly increased up to 12% of GPP.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.67-71
• /
• 2008

Formwork is a temporary structure that supports its weight and that of fresh concrete as well as construction live loads. Slab formwork consists of sheathing, stringer, hanger and shore. In construction site, pipe supports are usually used as shores which are consisted of the slab formwork. In this study, compressive strength of 80 pipe supports was measured by knife edge test and plate test. Buckling load of pipe supports was analyzed by structural analysis program(MlDAS). Theoretical buckling load with/without initial deformation was got by theoretical analysis. According to these results, buckling load which was analyzed by structural analysis program(MlDAS) was larger than compressive strength of knife edge test and plate test. Theoretical buckling load without initial deformation was larger than compressive strength of knife edge test and plate test. But Theoretical buckling load with initial deformation was lower than compressive strength of knife edge test and plate test. Initial deformation equation for test method according to the pipe support length was suggested. Therefore, the present study results will be used to design the slab formwork safely.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.57-61
• /
• 2010

Formwork is a temporary structure that supports its weight and that of fresh concrete as well as construction live loads. Scaffoling is a temporary frame used to support people and material in the construction or repair of buildings and other large structures. It is usually a modular system of metal pipes, although it can be made out of other materials. Bamboo is still used in some Asian countries like China. The purpose of a working scaffold is to provide a safe place of work with safe access suitable for the work being done. In construction site, steel pipes are usually used as scaffolds. In this study, scaffolding systems which is changed according to sleeper and joist space were measured by buckling test. Buckling load of respective scaffolding system was analyzed by structural analysis program(MIDAS). Buckling load of scaffold with/without wall connection and footboard was got by test and structural analysis. According to these results，we know that scaffolding system of case 3 is suitable. Buckling load of scaffold with wall connection is higher than without wall connection. So wall connection is important in scaffoling systems. Footboard in the scaffolding systems is not effective against promotion of buckling load. Finally, the present study results will be used to design scaffolding systems safely in the construction sites.

• KIEAE Journal
• /
• 제9권2호
• /
• pp.73-80
• /
• 2009

In the early twentieth century, many architects still practised eclectic design elements. Emergence of new building materials such as steel, concrete and glass were not yet found fresh roles in architectural design. It was Brussels that the use of modern materials gave rise to their new forms and gave influence to not only building skins but also spatial organization. Art Nouveau architecture is often seen as revolutionary and pioneering modern architecture against eclectic classicism prevalent in the 18th and 19th centuries. Despite the fact that some scholars point out that Art Nouveau is more a transient phenomenon than modern architecture proper, no one would deny that Art Nouveau carries a good deal of modern characteristics. This paper intends to show rather ambivalent perspectives upon Art Nouveau architecture. Although it insinuates overly dynamic nature in architectural languages, it does not hamper us from reading Art Nouveau as a vital component of modern architecture. Through a careful analysis of the early domestic designs of Victor Horta, it becomes evident that his work can provide modern architecture a meaningful alibi for its growth. Victor Horta's house design is well known to the public, both for his classical tastes and for its changing implementation. Horta's modern quality is never adequately recognized, partly due to his eye catching modern iron properties and sinuous ornamentation. This paper tries to offer an insight into the complicated stage set of the fin-de-$si{\grave{e}}cle$ through the work of Victor Horta whose influence has been immense in the making of modern architecture.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.156-157
• /
• 2017

It is possible in the case of the chemical admixtures for concrete currently being used in actual work sites to omit quality evaluation and replace it with the scores of the admixture manufactures; this can create a problem of decline in reliability in quality on the work site. Therefore this study sought to analyze the degree of influence changes in the solid content rate of lignin- and naphthalene-based water-reducing agents have on the fundamental characteristics of cement mortar. The results showed that in fresh mortar, the flow and amount of air decreases with decrease in the solid content ratio. In hardened mortar, the condensation strength had hardly any effect on the use of lignin-based water-reducing agent, but naphthalene-based water-reducing agent increased with the decrease in the solid content ratio.