• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.715-722
• /
• 2012

New discrete time domain models for the peak current controlled (PCC) power LED drivers in continuous conduction mode include for the first time the effects of the time delay in the pulse-width-modulator. Realistic amounts of time delay are found to have significant effects on the average output LED current and on the critical inductor value at the boundary between the two conduction modes. Especially, the time delay can provide an accurate LED current for the PCC buck converter with a wide input voltage. The models can also predict the critical inductor value at the mode boundary as functions of the input voltage and the time delay. The overshoot of the peak inductor current due to the time delay results in the increase of the average output current and the reduction of the critical inductor value at the mode boundary in all converters. Experimental results are presented for the PCC buck LED driver with constant-frequency controller.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권3호
• /
• pp.147-154
• /
• 2003

This paper presents a high-frequency boost type ZVS-PWM chopper-fed DC-DC power converter with a single active auxiliary edge-resonant snubber at the load stage which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of boost type ZVS-PWM chopper proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory and the temperature performance of IGBT module, the actual power conversion efficiency, and the EMI of radiated and conducted emissions, and then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn-off mode transition with the aid of an additional lossless clamping diode loop, and can be reduced the EMI conducted emission.

• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.34-43
• /
• 2008

상태 공간 평균화 모델은 강압형, 승압형 및 승 강압형 DC/DC 컨버터에 적용이 가능하며, 특별한 계산이 필요 없는 높은 정밀도가 증명된 모델이다. 이러한 모델은 전류연속모드(CCM) DC/DC 컨버터에서 확립되었으며, 본 논문에서는 컨버터의 전류연속모드(CCM) 모델로부터 의미 있는 결론을 유도하고자 한다. 본 논문에서는 스위치 평균모델을 이용한 DC/ DC 컨버터의 전류불연속모드(DCM) 모델링 및 임계특성에 관하여 논하였다. 스위치 평균 모델은 전류연속모드(CCM)와 전류불연속모드(DCM) 사이의 DC/DC 컨버터의 경계 조건에 대한 모델로부터 유추할 수 있으며, 시뮬레이션과 실험에 의해서 스위치의 평균 모델의 주파수 응답 특성을 예측할 수 있었다. 본 연구에서는 MOSFET를 사용하여 입력전압 15[V], 출력전압 24[V], 출력전력 24[W]급 시스템을 제작하여 실험하였다.

• 센서학회지
• /
• 제9권4호
• /
• pp.288-296
• /
• 2000

$64{\sim}85\;{\Omega}$의 저출력저항을 갖는 박막 크로멜-알루멜 다중접합 열전변환기의 입력-출력 관계는 근사적으로 제곱법칙을 따랐지만, 전압 감응도는 공기 중 및 진공 중에서 각각 $0.34{\sim}0.67\;V/W$ 및 $1.15{\sim}1.48\;V/W$로서 매우 작았고, 공기 중에서 교류-직류 전압 변환오차는 입력이 1 V의 정현파 실효전압일 때 $40\;Hz{\sim}10\;kHz$의 주파수 범위에서 약 +340 ppm으로서 매우 크게 나타났다. 열전변환기의 큰 변환오차는 주로 저출력저항으로부터 기인된 작은 전압 감응도 및 큰 열손실 때문으로 생각되고, 따라서 작은 교류-직류 변환오차를 얻기 위한 최적화가 필요하다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1176-1189
• /
• 2016

In this paper, a novel quasi-direct power control (Q-DPC) scheme based on a resonant frequency adaptive proportional-resonant (PR) current controller with a variable frequency resonant phase locked loop (RPLL) is proposed, which can achieve a fast power response with a unity power factor. It can also adapt to variations of the generator frequency in T-type Three-level shaft synchronous generator (SSG) converters. The PR controller under the static α-β frame is designed to track ac signals and to avert the strong cross coupling under the rotating d-q frame. The fundamental frequency can be precisely acquired by a RPLL from the generator terminal voltage which is distorted by harmonics. Thus, the resonant frequency of the PR controller can be confirmed exactly with optimized performance. Based on an instantaneous power balance, the load power feed-forward is added to the power command to improve the anti-disturbance performance of the dc-link. Simulations based on MATLAB/Simulink and experimental results obtained from a 75kW prototype validate the correctness and effectiveness of the proposed control scheme.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.61-65
• /
• 2017

In this paper a prototype of high frequency heating power supply system based on the high frequency heating principle is designed to take the place of acupuncture, moxibustion, warm dressing treatment and some other traditional physical therapy methods. Which possess the advantages of low cost, convenient, easy operation and good effect. The high frequency heating power supply can generate a pulse voltage of more than 1KV with 300KHz switching frequency to heat the patient's skin. The skin temperature can reach to $41{\sim}42^{\circ}C$. The peak current control method is used to maintain the skin temperature in the designed range. The design of the main circuit is based on the flyback converter topology. An easier and practical design method is proposed in this paper. The power supply system prototype is verified to be stable and reliable by both the simulation and experimental results.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5893-5898
• /
• 2014

본 논문은 연료비를 최소화 할 수 있는 2차전지 전력저장장치(BESS: Battery Energy Storage System)와 풍력-디젤 복합발전시스템으로 구성되는 독립형 마이크로그리드을 모델링하는 방법과 그 운전제어 알고리즘을 제안하였다. 먼저, 부하변동 및 풍속변동에 따른 주파수와 전압을 일정하게 제어할 수 있는 양방향 DC/AC 컨버터의 BESS를 모델링하고, 디젤발전기는 공급전력의 부족 및 BESS의 충전시에만 가동하도록 하는 운전제어알고리즘을 제안한다. 그리고, 제안된 모델링 방법과 운전제어알고리즘을 독립형 마이크로그리드에 적용한 결과, 풍속 및 부하변화에 대하여 주파수와 전압변동이 적정범위내로 유지할 수 있음을 증명할 수 있었다.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1117-1125
• /
• 2023

The DC part of the DC microgrid power conversion system uses capacitors for buffers of charge and discharge energy for smoothing voltage and plays important roles such as high frequency component absorption, power balancing, and voltage ripple reduction. The capacitor uses an aluminum electrolytic capacitor, which has advantages of capacity, low price, and relatively fast charging/discharging characteristics. Aluminum electrolytic capacitors(AEC) have previous advantages, but over time, the capacity of the capacitors decreases due to deterioration and an increase in internal temperature, resulting in a decrease in use efficiency or an accident such as steam extraction due to electrolyte evaporation. It is necessary to take measures to prevent accidents because the failure diagnosis and detection of such capacitors are a very important part of the long-term operation, safety of use, and reliability of the power conversion system because the failure of the capacitor leads to not only a single problem but also a short circuit accident of the power conversion system.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.358-365
• /
• 2007

This paper deals with a novel solid state controller (NSSC) for parallel operated isolated asynchronous generators (IAG) feeding 3-phase 4-wire loads in constant power applications, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of asynchronous generators. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 4-leg voltage source converter (CC-VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The complete system is modeled in MATLAB along with simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of isolated generating system consisting of NSSC and parallel operated asynchronous generators driven by uncontrolled pico hydro turbines and feeding 3-phase 4-wire loads.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.26-29
• /
• 2000

The conventional types of X-ray generators were bulky in physical size and heavy in weight and the control accuracies of the output voltages were not always satisfacotry. The high frequency switching inverter and converter technology on power conversion and control systems have been greatly closed up introducing power semiconducot devices. To decreasing the volume and the weight of high voltage transformer and to stabilize ripple. In this paper the newly developed x-ray generator in a low cost using duty modulation PWM inverter. This system verify improved performance by stabilize ripple of X-ray tube voltage and compared the reproducibility linearity and dose in single phase three phase and PSU.