• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.5
• /
• pp.545-553
• /
• 2012

A Gimbal structure system in observation reconnaissance aircraft is made up of camera module and stabilization drive device supporting camera module. During flight for image recording, the aircraft undergoes serious accelerations with wide frequencies due to several factors. Though base excitation of stabilization drive device induces vibration of camera module, it must get the stable and clean images. To achieve this aim, acceleration of camera module must be reduced. Hence, vibration isolators were installed to stabilization drive device. Considering isolators and bearings in the stabilization drive device, vibration characteristics of gimbal structure system were analyzed by finite element method. For three translational direction, acceleration transmissibility of camera module was calculated by harmonic responses analysis in the frequency range of 5 ~ 500 Hz. In addition to, sine-sweep experiment were performed to prove correctness of present analysis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.27-33
• /
• 2016

This paper proposes a Low Noise Amplifier (LNA) with chopper stabilization technique with a sample-hold circuit. Chopper stabilization technique is effective in terms of reducing low frequency offset and flicker noise. Conventional chopper amplifier has a disadvantage in area because of using Low Pass Filter (LPF) for remove chopping spike. The proposed chopper amplifier employed sample and hold technique to decrease chopping spike instead of LPF that improves 36% in voltage damping and 11% in area.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.384-390
• /
• 2021

This paper presents a wide-range tunable wavelength-locking technology based on optoelectronic oscillation (OEO) loops for optical fiber sensors and microwave photonics applications, explains the theoretical fundamentals of the design, and demonstrates a method for locking the relative wavelength differences between a leader semiconductor laser and its follower lasers. The input of the OEO loop in the proposed scheme (the relative wavelength difference) determines the radio-frequency (RF) signal frequency of the oscillation output, which is quantized into an injection current signal for feedback to control the wavelength drift of follower lasers so that they follow the wavelength change of the leader laser. The results from a 10-hour continuous experiment in a field environment show that the wavelength-locking accuracy reached ±0.38 GHz with an Allan deviation of 6.1 pm over 2 hours, and the wavelength jitter between the leader and follower lasers was suppressed within 0.01 nm, even though the test equipment was not isolated from vibrations and the temperature was not controlled. Moreover, the tunable range of wavelength locking was maintained from 10 to 17 nm for nonideal electrical devices with limited bandwidth.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.3
• /
• pp.183-205
• /
• 2021

This systematic review and meta-analysis aimed to analyze the effectiveness of maxillary stabilization splint (SS) therapy to reduce headache (HA) intensity and HA frequency in patients with temporomandibular disorders (TMD)-HA comorbidity. Randomized controlled trials (RCTs) using full-arch coverage, hard resin, and maxillary SS therapy were included. Electronic databases, including Cochrane Library, MEDLINE through PubMed, Web of Science, and EMBASE, were searched. The risk of bias was analyzed based on Cochrane's handbook. The search yielded 247 references up to January 28, 2020. Nine RCTs were included at a high risk of bias. The comparison groups included other splints, counseling, jaw exercises, medications, neurologic treatment, and occlusal equilibration. Four studies reported a statistically significant reduction in HA intensity, and five studies reported significant improvement in HA frequency from baseline at 2-12 months in patients with TMD-HA comorbidity treated with a full-arch hard maxillary SS. HA frequency in tension-type HA (TTH) comorbid with TMD diagnoses of myofascial pain (MFP) or capsulitis/synovitis improved significantly with SS than that with full-arch maxillary non-occluding splint (NOS) in two studies. Comparison groups receiving hard partial-arch maxillary splint nociceptive trigeminal inhibition (NTI) showed statistically significant improvements in HA intensity in patients with mixed TMD phenotypes of MFP and disc displacement comorbid with "general HA." Comparison groups receiving partial-arch maxillary resilient/soft splint (Relax) showed significant improvements in both HA intensity and frequency in patients with HA concomitant with MFP. The meta-analysis showed no statistically significant difference in the improvement of pain intensity at 2-3 months with comparison of the splints (partial-arch soft [Relax], hard [NTI], and full-arch NOS) or splint use compliance at 6-12 months with comparison of the splints (partial-arch Relax and full-arch NOS) versus the SS groups in patients with various TMD-HA comorbidities. In conclusion, although SS therapy showed a statistically significant decrease in HA intensity and HA frequency when reported, the evidence quality was low due to the high bias risk and small sample size. Therefore, further studies are required.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.311-325
• /
• 2020

In applying the spectral stochastic finite element methods to the frequency response analysis, the conventional methods are known to give unstable and inaccurate results near the natural frequencies. To address this issue, a new sensitivity based stabilized formulation for stochastic frequency response analysis is proposed in this paper. The main difference over the conventional spectral methods is that the polynomials of random variables are applied to both numerator and denominator in approximating the harmonic response solution. In order to reflect the resonance behavior of the structure, the denominator polynomials is constructed by utilizing the natural frequency sensitivity and the random mode superposition. The numerator is approximated by applying a polynomial chaos expansion, and its coefficients are obtained through the Galerkin or the spectral projection method. Through various numerical studies, it is seen that the proposed method improves accuracy, especially in the vicinities of structural natural frequencies compared to conventional spectral methods.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.123-127
• /
• 2002

We have measured the wavelengths of the absorption lines of the $^{13}$ C$_2$H$_2$molecule by using a wavelength meter calibrated against the national optical frequency standard (iodine Stabilized He-Ne Laser, KRISS-R701) in the visible wavelength region. To measure the absolute wavelengths of the absorption lines, the frequency of the laser has been stabilized in the peaks and the sides of the absorption lines of $^{13}$ C$_2$H$_2$. Also, we have proposed the development of a frequency standard source of ITU-T grid using stabilization in the sides of the absorption lines of $^{13}$ C$_2$H$_2$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.851-856
• /
• 2013

Recently, as the tactical environment has changedto one of network-centric warfare, where all components are connected through a network, much emphasis has been placed on the use of an artificial satellite for achieving high communication speeds. To provide a high-quality artificial satellite link, stabilization is very important in a platform. Previous stabilization control techniques used PI control, which is commonly used for vessels. However, for ground terminals that require a higher communication speed, the antenna should move faster to track an artificial satellite within a short period of time. Moreover, the terminals must be equipped with proper sensors and algorithms so that they can detect and compensate for external disturbances while tracking the artificial satellite. In this study, through the analysis of the dynamic model of an antenna system, a stabilization algorithm for ground terminals was proposed;this algorithm shows high isolation performance in the low-frequency range and includes $PI^2$ control.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.79-87
• /
• 2003

Application of combustion stabilization devices such as baffle and acoustic cavity to liquid propellant rocket engine is investigated to suppress high-frequency combustion instability, i.e., acoustic instability. First, these damping devices are designed based on linear damping theory. As a principal design parameter， damping factor is considered and calculated numerically in the chambers with/without these devices. Next, the unbaffled chambers with/without acoustic cavities are tested experimentally for several operating conditions. The unbaffled chamber shows the peculiar stability characteristics depending on the operating condition and it is found to have small dynamic stability margin. As a result, the acoustic cavity with the present design has little stabilization effect in this specific chamber. Finally， stability rating tests are conducted with the baffled chamber, where evident combustion stabilization is observed, which indicates sufficient damping effect.

• Nuclear Engineering and Technology
• /
• v.19 no.2
• /
• pp.115-121
• /
• 1987

A high voltage stabilization system for the SNU 1.5MV Tandem Van do Graaff accelerator was set up and its operational characteristics were examined and optimized. The optimum parameters of beam transport system were experimentally determined, and under the proper condition the accelerated proton beam current of 350nA was obtained at the target chamber. Without the high voltage stabilization the observed magnitude of voltage fluctuation was $\Delta$V/ V=5.2$\times$10$^{-3}$ without ion beam and 7.2$\times$10$^{-3}$ with ion beam, respectively, and its apparent ripple frequency for voltage fluctuations was about 3Hz or less. Through the optimized operation of the high voltage stabilization system, the terminal voltage fluctuation was reduced to $\Delta$V/V=2.45$\times$10$^{-4}$ and the energy stability with $\Delta$E/E=2.44$\times$10$^{-4}$ was steadily maintained at the 247.3kV terminal voltage, and the stabilization factor was deduced to be 29.4.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.588-591
• /
• 2009

We had experimental studies of microwave output generator. We experimented with a corrugate-shped K-band slow wave guide in the backward wave oscillator. It generated output 표 interaction between electron beam's generation and magnetic field. We estimated oscillation frequency at 24GHz by changing propagation velocity and group velocity. We identified movement by second harmonic of Cherencov interaction and slow cyclotron mode. In our study we achieved oscillation stabilization, generation of long pulse, improvement of oscillation efficiency and output.