• 전력전자학회논문지
• /
• 제2권2호
• /
• pp.41-48
• /
• 1997

최근 고품질 전원공급에 관한 요구가 증대되면서 장치에서 발생되는 고차 고조파에 의하여 다른 기기의 오동작을 방지하기 위한 EMI(Electro Magnetic Interferencfe)에 관한 연구가 전력전자분야를 중심으로 활발하게 진행되고 있다. 따라서 본 논문에서는 3상 전력변환 장치인 다이오드 정류기와 PWM 컨버터에서 PI 전류제어방식과 히스테리시스 전류제어방식을 대상으로 LISN(Line Impedance Stabilization Network)을 사용하여 제어방식의 변화와 스위칭 주파수 변동에 따른 전도성 EMI 방출량을 측정하여 비교하였다.

• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.611-621
• /
• 2006

This paper is to discuss the numerical conformal mapping from the unit disk onto Jordan region, which can be solved by Theodorsen equation. Wegmann's method has been known as the most efficient one for the Theodorsen equation. However, we found divergence through numerical experiments by the iterative method of Wegmann. The divergence occurs especially when some degree of difficulty is high. We analyze the cause of divergence and propose an improved method by applying a low frequency pass filter to Wegmann's method. By this proposed method we can get a stable convergence for all the problems which was unstable with the Wegmann's method.

• 소음진동
• /
• 제9권4호
• /
• pp.714-719
• /
• 1999

Because the residual vibration of a gun barrel acts negatively on the firing of a large calibers gun, the fast stabilization of theresidual vibration is indispensible to the precise and successive firing. In this study, the residual vibrations of a gun barrel carrying a bore evacuator and a muzzle brake are investigated by the experimental method. The influence of the eigenfrequencies and the mode shapes of gun barrel on the fast stabilization of the residual vibration is studied for the various masses of bore evacuator and muzzle brake, the possition of bore evacutor. Also the relationships between the funcamental frequencies and the settling times of the gun barrel are investigated for the various parameters. The experiments to reduce the residual vibration using the viscoelastic damping treatment gives the best result among the various treatments for the reduction of residual vibration of the system.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.76-76
• /
• 1997

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.137-143
• /
• 2002

본 논문에서는 가스제트 방식의 추력기를 이용해서 KSR-III의 탑재부를 스핀안정화시키는 방식에 대해 연구를 수행하였다. 탑재부 상에서 발생가능한 오차 요인들에 대해 정의하고, 그로 인해 자세각 및 각속도가 증가하는 양상에 대해 분석하였다. 추력비정렬오차로 인한 탑재부 상의 자세각 및 각속도 오차 증가를 살펴봄으로써 오차 증가를 최소로 하는 최적의 스핀주파수 및 정상스핀시간에 대한 관계식을 제시하였다. 관계식을 만족하는 모든 해들 중에서 낙하점 오차를 최소로 하는 값을 구하기 위해서는 가능한 모든 오차 조합들에 대한 몬테카를로 시뮬레이션이 필요하게 되지만, 본 논문에서는 오차들에 의한 힘 및 모멘트가 각 축에 대해 극대화되는 경우에 대해서만 시뮬레이션해 봄으로써 적절한 해를 손쉽게 구할 수 있는 부최적해 접근방식을 채택하였다. 이상과 같은 방법을 KSR-III의 탑재부에 적용해 봄으로써 적절한 크기의 스핀 주파수와 정상스핀시간을 결정할 수 있음을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.315-318
• /
• 2002

In this paper, we have studied about the determination methode of the operating frequency, and the design technique for the self-exited electronic ballast. Because we use the saturation characteristics of the ferrite core, the variation of the B/H curve characteristics for the selected core in the most important factor for the stabilization. Although it is impossible to fix the operation frequency, the self-exited electronic ballast is widely used because of its cost and the simplicity of its structure.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.133-139
• /
• 1995

In this paper, the frequency separation locking and interval stabilization of 4-channel DFB-LDs have been demonstrated using a fiber Fabry-Perot filter with an free spectral range of 100GHz. Frequency fluctuation and locking range of each channel were appeared to be within 15MHz and over 12GHz, respectively. Back-reflection curve from the fiber Fabry-Perot filter was used for the extraction of an error signal in order to increase the number of accomodable channels and extinction ratio.

• 한국항공우주학회지
• /
• 제37권4호
• /
• pp.399-405
• /
• 2009

위성 카메라를 위한 초점면부 영상 안정화 장치는 영상이 맺히는 초점면부의 운동외란을 제거함으로써 위성 카메라의 영상 품질을 향상 시킬 수 있는 효율적인 방법 중 하나이다. 본 연구의 목적은 초점면부 안정화 기법을 소개하고 초점면부 영상 안정화 장치 액츄에이터의 응답 및 추력에 대한 최적의 구동 조건을 결정하는 것이다. 이를 위해 다양한 구동 조건에 따른 영상화 안정화 장치의 마찰 구동형 압전 액츄에이터의 응답성과 추력을 실험적으로 조사하였다. 실험결과로부터 마그네슘 슬라이더에 대한 최적의 구동 주파수는 70 kHz, 듀티비는 27% 였다.

• 대한임상전기생리학회지
• /
• 제7권1호
• /
• pp.35-42
• /
• 2009

Purpose : The purpose of this study was to investigate the effects of Swiss ball lumbar stabilization exercise on the strength and flexibility, balance for the subjects. 30 university students who aged an average $23.21{\pm}4.41$ years. Methods : The exercise program lasted for 4 weeks with a frequency of 3 times per week within 12 to RPE. The result was analyzed by case study were measured by sit-up for strength, and back muscle strength, and trunk flexion test and trunk extension lifting for flexibility, and also measured by balance test before and during, and after the Swiss ball exercise program. Statistical analysis was performed using SPSS/Win(15.0) version and t-test. Results : By the result of this study, we found that the number of performing sit-up strength was increased, and back muscle strength was increase, and trunk flexion test and trunk extension lifting was increased after the 4 weeks Swiss ball exercise program. Conclusion : These finding indicate that Swiss ball lumbar stabilization exercise using Swiss ball could be beneficial to the subjects. The effect of increasing strength and flexibility, balance was flexibility.

• Carbon letters
• /
• 제12권1호
• /
• pp.16-20
• /
• 2011

Commercial PAN fibers were thermally stabilized at 220 or $240^{\circ}C$ for 30 min. Those fibers were further stabilized using radio-frequency (RF) capacitive plasma discharge during 5 or 15 min. From Fourier transform infrared spectroscopy results, it was observed that an additional plasma treatment led to further stabilization of PAN fibers. After stabilization, carbonization was performed to investigate the final tensile properties of the fabricated carbon fibers (CFs). The results revealed that a combination of thermal and plasma treatment is a possible stabilization process for manufacturing CFs. Morphology of CFs was investigated using scanning electron microscopy. The morphology shows that the plasma stabilization performed by the RF large gap plasma discharge may damage the surface of the CF, so it is necessary to select a proper process condition to minimize the damage.