• 사물인터넷융복합논문지
• /
• 제9권3호
• /
• pp.61-67
• /
• 2023

구리의 전기주조 공정을 최적화하기 위하여 이중 비밀 다층구조의 역전파 뉴럴 네트워크가 구성된다. 샘플 학습을 통하여, 구리 전기주조 공정 조건과 목표 특성 간의 함수관계가 정확히 성취되고, 구리 전기주조 공정 내에서 다층구조의 미세강도와 장력에 대한 예측이 이루어진다. 예측된 결과는 펄스 전원공급기를 장착한 구리 피로인산염 솔루션 시스템 내에서 구리의 전해석출 시험에 의하여 증명된다. 그 결과는 다음과 같이 나타난다. "3-4-3-2" 구조의 이중비밀 다층구조 뉴럴 네트워크에 의하여 예측된 구리 다층구조의 미세강도와 장력은 실험값에 매우 근접하며 그 상대적 오차는 2.32%보다 작다. 주어진 파라미터의 범위 내에서, 구리의 미세강도는 100.3~205.6MPa이며, 장력은 112~485MPa 정도로 측정된다. 미세강도와 장력이 최적인 조건에서 그에 대응하는 공정 조건은 다음과 같다: 전류밀도는 2A·dm-2, 펄스 주파수는 2KHz, 펄스의 듀티싸이클은 10%이다.

• Advances in nano research
• /
• 제14권4호
• /
• pp.375-389
• /
• 2023

In this study, free vibration analysis of functionally graded (FG) porous truncated conical shell panels reinforced by graphene platelets (GPLs) has been investigated for the first time. Additionally, the effect of three different types of porosity distribution and five different types of GPLs patterns on dynamic response of the shell are also studied. Halpin-Tsai micromechanical model and Voigt's rule are used to determine Young modulus, shear modulus and Poisson's ratio with mass densities of the shell, respectively. The main novelties of present study are: applying 3D elasticity theory and the finite element method in conjunction with Rayleigh-Ritz method to give more accurate results unlike other simplified shell theories, and also presenting a general 3D solution in cylindrical coordinate system that can be used for analyses of different structures such as circular, annular and annular sector plates, cylindrical shells and panels, and conical shells and panels. A convergence study is performed to justify the correctness of the obtained solution and numerical results. The impact of porosity and GPLs patterns, the volume of voids, the weight fraction of graphene nanofillers, semi vertex and span angles of the cone, and various boundary conditions on natural frequencies of the functionally graded panel have been comprehensively studied and discussed. The results show that the most important parameter on dynamic response of FG porous truncated conical panel is the weight fraction of nanofiller and adding 1% weight fraction of nanofiller could increase 57% approximately the amounts of natural frequencies of the shell. Moreover, the porosity distribution has great effect on the value of natural frequency of structure rather than the porosity coefficient.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.149-154
• /
• 2022

GaN 소자는 고출력 및 고선형성 특성을 가지므로 레이더 수신기에서 저잡음 증폭기로 활용되어 리미터 없이 구현될 수 있으며, 이로 인해 잡음지수를 개선하고 면적을 줄일 수 있다. 본 논문에서는 Ka-대역 레이더용 수신기에 적용하기 위한 GaN 저잡음 증폭기를 기술하였다. 설계된 저잡음 증폭기는 150-nm GaN HEMT 공정으로 제작되었으며, 목표주파수 내에서 패키징 손실을 포함하여 >23 dB 이득, <6.5 dB의 잡음지수 특성을 보였다. 고입력 부하시험시 이득 및 잡음 저하가 있었으나, 반복시험시 추가적인 성능저하는 나타나지 않았다. 부하시험 후 잡음지수 및 S-파라미터 측정을 통해 GaN 저잡음 증폭기에서 ~40 dBm 펄스 입력 전력을 견딜 수 있음을 확인하였다.

• Smart Structures and Systems
• /
• 제32권1호
• /
• pp.9-21
• /
• 2023

The parameters of civil engineering structures have time-variant characteristics during their service. When extremely large external excitations, such as earthquake excitation to buildings or overweight vehicles to bridges, apply to structures, sudden or gradual damage may be caused. It is crucially necessary to detect the occurrence time and severity of the damage. The unscented Kalman filter (UKF), as one efficient estimator, is usually used to conduct the recursive identification of parameters. However, the conventional UKF algorithm has a weak tracking ability for time-variant structural parameters. To improve the identification ability of time-variant parameters, an adaptive UKF with forgetting factor (AUKF-FF) algorithm, in which the state covariance, innovation covariance and cross covariance are updated simultaneously with the help of the forgetting factor, is proposed. To verify the effectiveness of the method, this paper conducted two case studies as follows: the identification of time-variant parameters of a simply supported bridge when the vehicle passing, and the model updating of a six-story concrete frame structure with field test during the Yangbi earthquake excitation in Yunnan Province, China. The comparison results of the numerical studies show that the proposed method is superior to the conventional UKF algorithm for the time-variant parameter identification in convergence speed, accuracy and adaptability to the sampling frequency. The field test studies demonstrate that the proposed method can provide suggestions for solving practical problems.

• Smart Structures and Systems
• /
• 제32권5호
• /
• pp.319-338
• /
• 2023

The study presents a new hybrid data-driven method by combining radial basis functions neural networks (RBF-NN) with the Jaya algorithm (JA) to provide effective structural health monitoring of arch dams. The novelty of this approach lies in that only one user-defined parameter is required and thus can increase its effectiveness and efficiency, as compared to other machine learning techniques that often require processing a large amount of training and testing model parameters and hyper-parameters, with high time-consuming. This approach seeks rapid damage detection in arch dams under dynamic conditions, to prevent potential disasters, by utilizing the RBF-NNN to seamlessly integrate the dynamic elastic modulus (DEM) and modal parameters (such as natural frequency and mode shape) as damage indicators. To determine the dynamic characteristics of the arch dam, the JA sequentially optimizes an objective function rooted in vibration-based data sets. Two case studies of hyperbolic concrete arch dams were carefully designed using finite element simulation to demonstrate the effectiveness of the RBF-NN model, in conjunction with the Jaya algorithm. The testing results demonstrated that the proposed methods could exhibit significant computational time-savings, while effectively detecting damage in arch dam structures with complex nonlinearities. Furthermore, despite training data contaminated with a high level of noise, the RBF-NN and JA fusion remained the robustness, with high accuracy.

• Structural Engineering and Mechanics
• /
• 제88권4호
• /
• pp.389-403
• /
• 2023

In order to explore the influence of tooth root cracks on the dynamic characteristics of multi-stage planetary gear transmission systems, a concentrated parameter method was used to construct a nonlinear dynamic model of the system with 30-DOF in bending and torsion, taking into account factors such as crack depth, length, angle, error, time-varying meshing stiffness (TVMS), and damping. In the model, the energy method was used to establish a TVMS model with cracks, and the influence of cracks on the TVMS of the system was studied. By using the Runge- Kutta method to calculate the differential equations of system dynamics, a series of system vibration diagrams containing cracks were obtained, and the influence of different crack parameters on the vibration of the system was analyzed. And vibration testing experiments were conducted on the system with planetary gear cracks. The results show that when the gear contains cracks, the TVMS of the system will decrease, and as the cracks intensify, the TVMS will decrease. When cracks appear on the II-stage planetary gear, the system will experience impact effects with intervals of rotation cycles of the II-stage planetary gear. There will be obvious sidebands near the meshing frequency doubling, and the vibration trajectory of the gear will also become disordered. These situations will become more and more obvious as the degree of cracks intensifies. Through experiments, the theoretical results are in good agreement with experimental results, verifying the correctness of the theoretical model. This provides a theoretical basis for fault diagnosis and reliability research of the system.

• 한국음향학회지
• /
• 제27권5호
• /
• pp.256-261
• /
• 2008

본 논문에서는 기존의 최소값 제어 재귀 평균기법(minima controlled recursive averaging, MCRA) 알고리즘에 조건 사후 최대 확률 (maximun a posteriori, MAP)을 적용한 음성향상을 제안한다. 기존의 MCRA는 파워스펙트럼에 평균을 취하고 각 서브밴드에서 음성 신호 존재 확률로 조절하는 스무딩 매개변수를 사용한다. 본 논문에서 제안된 알고리즘은 현재 프레임에 들어온 신호가 이전 프레임에서의 음성의 존재와 부재에 대한 조건을 부여해 주어 음성 신호 존재확률을 수정하여 음성향상에 적용한다. 제안된 음성 향상은 ITU-T P.862 perceptual evaluation of speech quality (PESQ)와 주관적 음질평가를 이용하여 평가하였고 기존의 MCRA 방법보다 향상된 결과를 나타내었다.

• Wind and Structures
• /
• 제38권3호
• /
• pp.215-229
• /
• 2024

Guyed mast structures exhibit characteristics such as high flexibility, low mass, small damping ratio, and large aspect ratio, leading to a complex wind-induced vibration response mechanism. This study analyzed the time- and frequency-domain characteristics of the wind-induced response of a guyed mast structure using measured acceleration response data obtained from the Shenzhen Meteorological Gradient Tower (SZMGT). Firstly, 734 sets of 1-hour acceleration samples measured from 0:00 October 1, 2021, to 0:00 November 1, 2021, were selected to study the vibration shapes of the mast and the characteristics of the generalized extreme value (GEV) distribution. Secondly, six sets of typical samples with different vibration intensities were further selected to explore the Gaussian property and modal parameter characteristics of the mast. Finally, the modal parameters of the SZMGT are identified and the identification results are verified by finite element analysis. The findings revealed that the guyed mast vibration shape exhibits remarkable diversity, which increases nonlinearly along the height in most cases and reaches a maximum at the top of the tower. Moreover, the GEV distribution characteristics of the 734 sets of samples are closer to the Weibull distribution. The probability distribution of the structural wind vibration response under strong wind is in good agreement with the Gaussian distribution. The structural response of the mast under wind loading exhibits multiple modes. As the structural response escalates, the first three orders of modal energy in the tower display a gradual increase in proportion.

• 원예과학기술지
• /
• 제29권5호
• /
• pp.420-432
• /
• 2011

방울토마토(Lycopersicon esculentum cv. Koko) 재배 온실에 피해를 주는 온실가루이 개체군(Trialeurodes vaporariorum (Westwood))의 온도 발육 모형과 암컷 성충 산란 모형을 작성하여 시설 내 대기 중 온도와 미기상 온도인 잎 뒷면 온도를 적용한 DYMEX 프로그램(호주 CSIRO에서 개발한 미리 탑재된 모듈들을 사용하는 모의 실험 프로그램)으로 밀도 변동을 모의 실험하였다. 온도에 따라 상이한 발육 기간과 산란수를 각각 표준화시킨 발육 완료 분포 모형과 연령 특이적 산란수와 생존율을 비선형 회귀 모형에 적합시켜 밀도 변동 모의 실험을 하였다. 실제 줄내림 방식의 방울 토마토에서 토마토 식물체를 3위치(상단: 지상 1.6m 이상, 중단: 지상 0.9-1.2m 사이, 하단: 지상 0.3-0.5m 사이)로 나누어 각 위치별로 온실 내 대기 중 온도와 잎 뒷면 온도를 기록하였다. 온실 내 대기 중 온도와 잎 뒷면 온도간의 상관 관계를 비선형 회귀로 적합하여, 온실 내 미기상 온도 자료를 만들었다. 온실 내 미기상 온도 자료인 잎 뒷면 최대 온도는 대기 중 최대 온도보다 항상 낮게 유지되고 있었으며, 하단, 상단, 중단의 순으로 온도가 낮아지는 현상을 보였다. 모의 실험을 위한 시기와 초기 이입 밀도의 설정은 황색 점착 트랩을 이용하여 실제 온실에서 이입되는 시기(6월초)에 유인된 암컷 성충 10마리를 사용하였다. 온실 내 대기 중 온도 자료와 잎 뒷면 온도 자료를 각각 이용하여 온실가루이 유충의 발육 모형과 성충의 산란 모형을 DYMEX 프로그램으로 모의 실험하였다. 모의 실험 결과 검증을 위해 대기 중 온도와 잎뒷면 온도를 조사한 온실에서 토마토 식물체 3위치별, 각태별 온실가루이 밀도의 육안 조사도 실시하였다. 알의 경우 크기로 인해 육안 조사 대상에서 제외되었다. 육안 조사 결과와 육안 조사 시기의 DYMEX 모의 실험 결과값을 상관 분석하였다. 육안 조사 온실가루이 밀도와 잎 뒷면 온도를 이용한 모의 실험 결과 밀도가 모든 발육태에서 항상 양의 상관 관계를 보였다. 육안 조사 결과 밀도 변동 패턴도 방울토마토 잎 뒷면 온도를 이용한 모의 실험 결과 밀도 변동 패턴과 유사하였다. 본 연구 결과 방울토마토 온실에서 온실가루이 개체군 밀도 변동의 적절한 예측을 위해서는 잎 뒷면 온도를 고려해야 하는 것으로 나타났다.

• Clinical and Experimental Reproductive Medicine
• /
• 제8권2호
• /
• pp.45-55
• /
• 1981

Clomiphene citrate. antiestrogen, was given to 39 infertile males whose spermatogenesis were disturbed and the efficacy of the drug was evaluated at the Department of Urology in 1980. (Table 1). Patients were divided into 3 clinical observation groups such as group I composed of 19 cases of idiopathic azoospermia, group II consisted of 15 cases of oligospermia following the vasovasostomy, and group III comprised 5 cases of testicular azoospermia. (Table 2). Clinical characteristics of these patients were as follows: Age of the patients ranged from 26 to 43 years old with mean of 34, and that of their wives ranged from 24 to 41 years old with mean of 31. Duration of marital life ranged from 1 to 21 years with mean of 5 years. Sizes of testis ranged from 6 to 25 ml with mean of 16 ml. Coital frequency ranged from 0.5 to 6 per week with mean of 2.4 per week. Levels of plasma FSH ranged from 3.15 to 23.06 lU/1 with mean of 8.15 lU/1, those of LH ranged from 2.98 to 19.89 lU/1 with mean of 8.18 lU/1 and those of testosterone ranged from 3.09 to 9.97 ng/ml with mean of 6.48 ng/ml. (Table 3). Clomiphene citrate was given in dosage of 50 mg per day (in d.) orally to 31 patients for 3 to 9 months and in dosage of 100 mg per day (b.i.d.) orally to 8 patients for 3 to 9 months. (Table 8). Semen samples were analysed monthly on each patient by routine analysis techniques. For the assessment of the efficacy of Clomiphene citrate on faulty spermatogenesis following empirical criteria were used: For semen quality: Improvement (I) represents that semen parameter increased more than 25% from basal level after the treatment, Unchange (U) expresses that semen parameter increased less than 25% of basal level or not changed after the treatment and Deterioration (D) means that semen parameter decreased from basal level after the treatment. For fertility unit (total counts ${\times}$ motility ${\times}$ morphology ${\div}10^6$): Improvement (I) represents that fertility unit increased more than 10 units after the treatment, Unchange (U) expresses that fertility unit increased less than 10 units or not changed after the treatment, and Deterioration (D) means that fertility unit decreased after the treatment. (Table 4). Results obtained from the Clomiphene therapy were as follows: Changes of spermiograme before and after the Oomiphene therapy shown in the Table 5. Sperm counts increased from 23 to 31 ${\times}10^6$/ml in group I, from 17 to 29 ${\times}10^6$/ml in group II. Other parameters of spermiogramme were not changed significantly after the treatment. Fertility units increased from 14 to 18 units after the treatment in group I, and from 16 to 18 units after the treatment in group II. Effectiveness of Clomiphene citrate on spermatogenesis was summarised in the Tables 6 and 7. After the treatment, sperm count increased in 11 patients, motility increased in 6 patients, morphology increased in 4 patients and fertility units increased in 9 patients. No sperm could be produced by Clomiphene citrate in group III of testicular azoospermia. Dosage of 50 mg of Clomiphene citrate per day for 3 to 6 months was proved to be the most effective in the present series. (Table 8). Pregnancy occurred in 2 patients after the treatment. No particular side effects were noted by the treatment. Pharmacologic compounds used for male infertility were shown in the Table 9. Reported results of Clomiphene citrate were shown in the Table 10.