• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.259-264
• /
• 2006

심부 지각구조 조사를 위한 MT 및 GDS 탐사에서 주변 해양은 지각 구조의 반응을 왜곡시키는 역할을 한다. 본 연구에서는 MT 2-D 모델링을 이용하여 한반도에서 주변 해양의 효과를 분석하고, 해양 효과의 주파수적, 공간적 의존성을 조사하였다. 동해와 서해는 각각의 컨덕턴스 차이 때문에 공간적, 주파수적 영향이 다른 양상을 보였다. 전반적으로 TM 모드보다 TE 모드의 반응이 덜 왜곡되었으며, TM 모드 반응은 저주파수로 갈수록 1-D 모델 반응과 그 차이가 증가하였다. 한반도의 경우, 주어진 1-D 구조에서 획득 가능한 주파수 하한을 0.001Hz라 가정했을 때, 동해로부터 약 100km 안팎, 서해로부터 약 40-50km 정도 이격되어야 해양의 영향을 무시할 수 있으며, 이 이격거리는 지하의 1-D 구조와 주파수에 의존적이다.

• Earthquakes and Structures
• /
• 제3권2호
• /
• pp.169-180
• /
• 2012

The performance of pure friction isolation system with respect to the frequency bandwidth of excitation and the predominant frequency is investigated. A set of earthquake ground motions (artificial as well as recorded [with different combinations of magnitude-distance and local site geology]) is considered for investigating effectiveness of pure friction isolators. The results indicate the performance of pure friction base isolated system does not only depend upon coefficient of friction and mass ratio but the stick-slip behaviour depends upon the frequency content of the excitation as well. Slippage prevails if the excitation frequency lies in a suitable frequency range. This range widens with increasing mass ratio. For larger mass ratios, the sliding effect is more pronounced and the maximum acceleration response is further reduced in the neighbourhood of frequency ratio (${\omega}/{\omega}_n$) of unity. The pure friction isolation system is effective in the case of broadband excitations only and that too, in the acceleration sensitive range of periods. The pure friction system is not effective for protection against narrow band motions for which the system response is quasi-periodic.

• Computers and Concrete
• /
• 제17권2호
• /
• pp.241-253
• /
• 2016

Depending on the researcher, the effect of prestressing on the natural frequency of a PSC (prestressed concrete) structure appear to have been interpreted differently. Most laboratory tests on PSC beams available showed that the natural frequency is increased appreciably by prestressing. On the other hand, some other references based on field experience argued that the dynamic response of a PSC structure does not change regardless of the prestressing applied. Therefore, the deduced conclusions are inconsistent. Because an experiment with and without prestressing is a difficult task on a full size PSC bridge, the change in natural frequency of a PSC bridge due to prestressing may not be examined through field measurements. The study examined analytically the effects of prestressing on the natural frequency of PSC bridges. A finite element program for an undamped dynamic motion of a beam-tendon system was developed with additional geometric stiffness. The analytical results confirm that a key parameter in changing the natural frequency due to prestressing is the relative ratio of prestressing to the total weight of the structure rather than the prestressing itself.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.48-55
• /
• 1990

2차 샘플링이 도플러 신호의 평균 주파수 측정에 미치는 영향에 대해서 분석을 하였다. 아나로그/디지탈 변환기(analogue-to-digital converter)의 샘플링 주파수를 낮추기 위해 수신 신호를 $4f_0$ 대신에 $4f_0$/5나 $4f_0$/9의 낮은 주파수로 샘플링에서 도플러 신호를 얻을 수 있다. ($f_0$는 송신 신호의 중심 주파수이다.) 일반적인 도플러 시스템에서처럼 수신 신호가 협 대역이면 낮은 샘플링 주파수로 인해 발생되는 평균 주파수의 측정에 대한 오차는 무시할 정도로 작다는 것을 컴퓨터 시뮬레이션과 실험을 통해 증명하였다.

• 한국운동역학회지
• /
• 제28권3호
• /
• pp.187-191
• /
• 2018

Objective: The purpose of the present study is to investigate the effect of a muscle activity by applying the complex exercise method of sling in accordance with the provision of various vibration intensities for paraplegia-spinal cord injury. Method: The subjects of the study were 15 men in their 40s and 50s with lower limb disabilities and low potential risk, who were randomly divided into a sling exercise group (SG n=4), a sling with low frequency vibration group (SLVG n=4), a sling with mid-frequency vibration group (SMVG n=4), and a sling with high frequency group (SHVG n=4) in accordance with the provision of slings and vibration stimuli. The vibratory intensity provided was divided into low frequency (30 Hz), mid-frequency (50 Hz), and high frequency (70 Hz). The anterior deltoid (AD), the posterior deltoid (PD), the pectoralis major (PM), the upper trapezius (UT), the latissimus dorsi (LD), and the multifidus (MF) were measured to compare and analyze muscle activity. Results: The closed kinetic chain (CKC) exercise to the shoulder joint showed higher muscle activity in most muscles for the SMVG, and statistically significant differences in the anterior deltoid (AD), the pectoralis major (PM), and the multifidus (MF) in particular. Conclusion: The intermediate frequency (50 Hz) string vibration was the effective vibration stimuli for Closed kinetic chain (CKC) exercises.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.1-9
• /
• 2018

The spool displacement of directional control valve can be considered as the standard signal to measure the bandwidth frequency of a directional control valve. When the spool displacement is not available, the metering-orifice system is implemented in this research as an alternative way of measuring the 90 degrees phase bandwidth frequency of the hydraulic directional control valve. The inertia effect on the transmission line oil induces the phase lead of the valve load pressure when compared with the phase of spool displacement. The capacitance effect of the oil induces the phase lag of the valve load pressure. The phase of the load pressure can be adjusted to be the same as that of the spool displacement by controlling the opening area of the metering orifice. A series of experiments were conducted to verify the effectiveness of the metering orifice. The 90 degrees phase bandwidth frequency measured from the valve load pressure was significantly deviated in some cases from the frequency of the spool displacement. The metering orifice was hard to be applied to measure the -90 degrees phase bandwidth frequency of the high precision.

• 대한물리치료과학회지
• /
• 제13권2호
• /
• pp.27-36
• /
• 2006

The purpose of this study would like to analyze statically significant difference for low back-pain frequency of mother after development-disability children. Seven nursery children with disability conducted survey from 122 mothers cared children with disability. Survey data was obtained from April 14. 2006 to May 23. 2006. The results were as follows: According to walking-existence, assistance walking, and disability-degree, low back pain incidence frequency of mothers were statically significant difference, (p<0.05). Low back pain incidence frequency of walker-ability population was 51.4%, but low back pain incidence frequency of walker-disability population was 80.0%. then low back pain incidence frequency of mothers to walking-existence was differed amount. Disabled not statically significant difference to encephalopathy and disability-type1 and disability -type2 (p>0.05). children with disability-degree and assistance walking benchmarked low back pain disability-measure. Low back pain degree not relevancy statically significant. Physical load was statically significant difference between Oswestry's low back pain score and reach effect to child-cared(p<0.05). As development-children with disability of disable degree, Mother appeared to highly low back pain frequency rate and appeared to large reach effect child-cared owing to physical load of low back pain. So hereafter, location and person request to approach with more clinical and objectively. As approach result, it will help to stress solution of children with disability owing to develop to low back pain class and family capable strengthening program and so on.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.200-200
• /
• 2011

Although the cut-off probe, a precise measurement method for the electron density, is widely used in the industry, the physics on the wave spectrum of the cut-off is not understood yet, only cut-off point frequency containing the information of electron density has been analyzed well. This paper analyzes the microwave frequency spectrum of the cut-off probe to see the physics behind using both microwave field simulation (CST Microwave Studio) and simplified circuit simulation. The result shows that the circuit model well reproduces the cut-off wave spectrum especially in the low frequency regime where the wavelength of the driving frequency is larger than the characteristic length and reveals the physics of transmission characteristics with frequency as resonances between vacuum, plasma and sheath. Furthermore, by controlling the time domain in solver of the microwave simulator, the cut-off like transmission peaks above the cut-off frequency which has been believed as cavity effect is verified as chamber geometry effect. The result of this paper can be used as the basis for the improvement of cut-off probe.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.207-212
• /
• 2005

Dual frequency acoustic pinger(AP) was manufactured to reduce study effect by long-term use of developed single frequency AP to prevent cetacean bycatch. Directivity characteristic of transducer was the omnidirectional pattern which showed less than ${\pm}3dB$ the change range of sensitivity on the beam pattern of right and left. Source power level(SPL) was 1384311pa with epoxy window before casing however after casing 1170B11Pa at sea. Dual frequency Af was tested to identify the avoidance behavior of bottlenose dolphin by its working. However the efficiency of dual frequency AP about the study effect was verified experiment repeatedly using single and dual frequency AP.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.305-311
• /
• 2014

Recently, though it was developed several services using the context-awareness technology of IoT, there exist also obstacles for high quality service. Specifically it is short the study for uncertainty of context-awareness. This study focused on understanding the effect of frequency interference among several environmental factors for location determination to increase precision of location determination. It was found that frequency interference between devices using 2.4Ghz frequency effect on the location determination precision. It was resulted that frequency interference increase the error of location determination precision. Then, we confirmed that it was required the suitable compensation method corresponding to frequency interference.