• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.706-715
• /
• 2012

Electro-optical sigma-delta modulators are the core module of digital receiver to digitize wideband radio-frequency signals directly at an antenna. Electro-optical sigma-delta modulators use a pulsed laser to oversample an input radio-frequency signals at two Mach-Zehnder Interferometer(MZI) and shape the quantization noise using a fiber-lattice accumulator. Decimation filtering is applied to the quantizer output to construct the input signal with high resolution. The jitter affects greatly on reconstructing the original input signal of modulator. This paper analyzes the performance of first order single bit electro-optical sigma-delta modulator in the time domain and the frequency domain. The performance of modulator is analyzed by using asynchronous spectral averaging of the reconstructed signal's spectrum in the frequency domain. The reference value of time jitter is presented by analyzing the performance of jitter effects. This kind of jitter value can be used as a reference value on the design of modulators.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.45-53
• /
• 2013

Fuel cell power system is one of the most promising energy source for the alternative energy because it has unique advantages such as high energy density, no power drop during operation, and feasible to make compact size. However, due to very low response time, fuel cell is difficult to correspond to drastic load changes and start-up operation. For solving these problem, fuel cell power system must include energy storage device such as Li-Poly battery or super capacitor. Therefore, bi-directional DC-DC converter must be required for this storage device and fuel cell-PCS control. This paper presents a design and modeling of the bi-directional DC/DC converter. Firstly, we present modeling the boost and buck mode of the bi-directional converter through both PWM switch model and state space averaging technique. Secondly, in order to minimize output ripple and transient response overshoot, we have two identical DC-DC converters interleaved and adopt two-loop voltage-current controller. The proposed bi-directional DC-DC converter's modeling method and control design have been verified with computer simulation and experimentation.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.117-124
• /
• 2007

This study investigates the effect of spatial averaging and compliance taken account of in the analysis of earthquake-induced permanent deformation of slopes. At present, the rigid block analysis originally proposed by Newmark is widely used in the deformation analysis, mainly because of its computational efficiency. This type of approach, however, adopts the so-called decoupled approach, in which seismic response and deformation analyses are carried out separately. Original Newmark block analysis assumes the potential sliding mass to be noncompliant, and has been criticized to be potentially unconservative. This paper reviews the impact of the noncompliance assumption of the potential sliding mass in the Newmark-type analysis. The gross effects of earthquake shaking on the potential sliding mass are estimated by spatial averaging method and analyzed in frequency domain. The results indicate that there is a simple criterion that can be used to determine the level of compliance of the potential sliding mass.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.409-412
• /
• 2005

Just as the vibration modes of a beam are dependent on its end constraints or boundary conditions. Vibration modes of a tire are dependent on its patch and spindle constraints. This dependence is key to understanding the dynamic properties of a tire and is apparent in various analytical and experimental investigations in the literature. One of the main task in a modal analysis is the measurement of the Frequency Response Function (FRFs). Because all the subsequent analysis is based on these FRFs, their quality is critically important in obtaining accurate modal parameter estimates. In rotating systems, FRFs are frequently contaminated by harmonic peaks related to such factors as imbalance, misalignment. This harmonic peaks appear in the FRFs as sharp spikes, which can be erroneously treated in modal curve-fitting procedures as structural modes. The harmonic peaks removal method is demonstrated by application to modal analysis on rotating tires. The results show substantial improvement in FRF quality.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.5
• /
• pp.422-430
• /
• 2014

This study proposes a small-signal model and control design for a two-stage DC-DC-AC converter to investigate its dynamic characteristics in relation to battery energy storage system. When the circuit analysis of the two-stage DC-DC-AC converter is attempted simultaneously, the mathematical procedure of deriving the dynamic equation is complex and difficult. The main idea of modeling the two-stage DC-DC-AC converter states that this topology is separated into a bidirectional DC-DC converter and a single-phase inverter with an equivalent current source corresponding to that of the inverter or converter. The dynamic equations for the separated converter and inverter are then derived using the state-space averaging technique. The procedures of building the small-signal model of the two-stage DC-DC-AC converter are described in detail. Based on the derived small-signal model, the individual controllers are designed through a frequency-domain analysis. The simulation and experimental results verify the validity of the proposed modeling approach and controller design.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.204-209
• /
• 2013

FFT based fingerprinting to conceal more information has developed for video copyright protection. More complex information of video is necessary to prove an ownership and legal distributions in invisible form. This paper describes a method to insert more information and to detect them. $3{\times}3$ points structure is used to present information. The possible ways to show are 8bit, $2^8$ = 256 where one point of 9 is always turn on. The points are marked in frequency domain that both real and imaginary party numbers are modified. The five successive frames of same scenes are used to mark because the same scene has very similar shape in FFT result. However, the detail values of coefficients are totally different each other to recognize the marked points. This paper also describes a method to detect the marked points by averaging and correlation algorithm. The PSNRs of marked images by our method had 51.138[dB] to 51.143[dB]. And we could get the correlation values from 0.79 to 0.87.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.93-98
• /
• 2008

Abstract: Surface topography has a significant influence on seismic wave propagation in a reflection seismic exploration. Effects of surface topography on two-dimensional elastic wave propagation are investigated through modeling using a weighted-averaging (WA) finite-element method (FEM), which is computationally more efficient than conventional FEM. Effects of air layer on wave propagation are also investigated using flat surface models with and without air. To validate our scheme in modeling including topography, we compare WA FEM results for irregular topographic models against those derived from conventional FEM using one set of rectangular elements. For the irregular surface topography models, elastic wave propagation is simulated to show that breaks in slope act as a new source for diffracted waves, and that Rayleigh waves are more seriously distorted by surface topography than P-waves.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.951-962
• /
• 2002

A DMT transceiver recovers the sampling time from reserved sub-carriers, the pilots. Since the pilots are available after the FFT, the symbol synchronization must be done before sample synchronization. In DMT VDSL system, symbol synchronization is handled separately from sample synchronization, although the two processes are intimately related. The DMT symbol itself contains sufficient information, the cyclic extension, for symbol synchronization. Using only the sign bit of received signal, the Maximum Likelihood Estimation solution is derived. The Tx windowing in the transmitter of DMT VDSL system results in the blurring of MLE peaks. We propose the weighted summing MLE method using the sign bit which produces the clearly sharp top of MLE peaks. The stability of symbol synchronization is improved significantly by averaging over a few symbols. This paper presents the study of the original MLE and the weighted summing MLE using sign bit. A clock difference between transmitter and receiver destroys the oahogonality of the carriers. Therefore, a receiver using asynchronous sampling must perform timing correction in the discrete-time domain. We introduce an efficient digital sample synchronization method which is based on temporal and frequency domain digital signal processing.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3885-3895
• /
• 2000

The emergence of digital imaging and digital networks has made duplication of original artwork easier. In order to protect these creations, new methods for signing and copyrighting visual data are needed. In the last few years, a large number of schemes have heen proposed for hiding copyright marks and other information in digital image, video, audio and other multimedia objects. In this paper, we propose a technique for embedding the watermark of visually recognizable patterns into the frequency domain of images. The embedded watermark can be retrieved from the decoded sequence witbout knowledge of the original. Because the source image is not required to extract the watermark, one cannot make the fake original that is invertible to watermarking scheme from the waternlarked image. In order to recover the embedded signature data without knowledge of the original, a prediction of the original value of the pixel containing the information is needed. The prediction is based on a averaging of amplitude values in a neighborhood around the pixel itself. Additionally the projxJsed technique could survive several kinds of image processings including JPEG lossy compression.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.55-62
• /
• 2009

In this paper, we propose a method on the training sequence based on channel estimation issues for relay networks that employ amplify-and-forward(AF) transmission scheme. In $^{[1]}$ and $^{[2]}$, we have to point out that jointly estimating the channel from source to relay and from relay to destination suffers from many drawbacks in fast fading case because the estimation of previous pilots is not suitable for current channel. In this paper, we consider a new joint estimation of overall channel impulse response(CIR) using one OFDM signal without pilots. Using the maximum likelihood(ML) function, we derive a channel estimator by taking the frequency domain of transmitted signal as Gaussian and averaging the ML function over the resulting Gaussian distribution. Simulation results show that our proposed channel estimator performs a fraction of 1dB compared with $^{[1]}$ in high SNR region.