• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.1-12
• /
• 1998

In this paper, an incoherent imaging of a high-contrast cylindrical cavity illuminated by the time-harmonic cylindrical wave is obtained ia the back-projections of he incoherent intensity patterns, which si acquired by averaging out the multi-frequency intensities of the total electric field scattered from this object in the cross-borehole measurement configuration. Multi-freuqncy effect is shown numerically and is intepreted analytically by the mutual coherence function defined in the is frequency domain. This imaging method is validated by imaging high-contrast cylindrical cavidities and the conditions to get better image are investigated.

• 대한전자공학회논문지TC
• /
• 제49권8호
• /
• pp.33-38
• /
• 2012

본 논문은 DVB-T2 시스템에서 잡을 효과를 최소화시키기 위한 등화 알고리즘이 제안한다. 제안알고리듬은 동일한 시간영역 OFDM 심볼 내에서 신호 구간 선택을 달리하여 예측한 채널응답과 주파수 영역의 데이터를 평균하여 성능을 개선한다. 컴퓨터모의 실험을 통하여 제안알고리듬의 성능을 기존 알고리듬과 비교 평가한다.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1566-1577
• /
• 2018

This paper presents a stability analysis of AC-DC power system feeding a speed controlled DC motor in which this load behaves as a constant power load (CPL). A CPL can significantly degrade power system stability margin. Hence, the stability analysis is very important. The DQ and generalized state-space averaging methods are used to derive the mathematical model suitable for stability issues. The paper analyzes the stability of power systems for both speed control natural frequency and DC-link parameter variations and takes into account controlled speed motor dynamics. However, accurate DC-link filter and DC motor parameters are very important for the stability study of practical systems. According to the measurement errors and a large variation in a DC-link capacitor value, the system identification is needed to provide the accurate parameters. Therefore, the paper also presents the identification of system parameters using the adaptive Tabu search technique. The stability margins can be then predicted via the eigenvalue theorem with the resulting dynamic model. The intensive time-domain simulations and experimental results are used to support the theoretical results.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.25-33
• /
• 2018

본 논문은 long-term evolution (LTE) 시스템과 같이 하향링크에서 orthogonal frequency division multiple access (OFDMA) 방식을 이용하고 상향링크에서 single-carrier frequency division multiple access (SC-FDMA) 방식을 이용하는 대역 내 전이중 셀룰러 시스템을 위한 반복적인 자기간섭 채널 추정 방법을 제안한다. 이 방법은 기지국이 알고 있는 하향링크 신호와 상향링크 파일럿 신호를 이용하여 대략적인 자기간섭 채널 추정치를 획득한 후, 이것에 주파수 영역에서의 평균화와 시간 영역에서의 채널 절단을 순차적으로 적용하여 채널 추정치를 정교하게 만든다. 또한 이 방법은 이러한 추정 절차를 반복적으로 수행함으로써 채널 추정치의 정확도를 더욱 향상시키며 자기간섭 채널을 획득하기 위해 별도의 무선자원을 전혀 요구하지 않는다. 시뮬레이션을 통해 제안 방법이 정확한 자기간섭 채널 길이에 대한 정보 없이도 자기간섭 채널 추정 성능을 크게 향상하여 자기간섭이 완벽히 제거된 경우에 매우 근접한 상향링크 채널 추정 성능과 SINR 성능을 달성함을 보인다.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1467-1474
• /
• 2004

In this study, a new damage identification method for beam-like structures with a fatigue crack is proposed. which does not require comparative measurement on an intact structure but require several measurements at different level of excitation forces on the cracked structure. The idea comes from the fact that dynamic behavior of a structure with a fatigue crack changes with the level of the excitation force. The 2$^{nd}$ spatial derivatives of frequency response functions along the longitudinal direction of a beam are used as the sensitive indicator of crack existence. Then, weighting function is employed in the averaging process in frequency domain to account for the modal participation of the differences between the dynamic behavior of a beam with a fatigue crack at the low excitation and one at the high excitation. Subsequently, a damage index is defined such that the location and level of the crack may be identified. It is shown from the analysis of vibration measurements in this study that comparison of frequency response characteristics of a beam with a single fatigue crack at different level of excitation forces enables an effective detection of the crack.

• 방송공학회논문지
• /
• 제11권2호
• /
• pp.222-228
• /
• 2006

이 논문에서는 동일채널 간섭이 존재하는 채널 환경에서 OFDM(Orthogonal Frequency Division Multiplexing) 시스템의 수신 다이버시티 결합 방법을 제시한다. 제시한 방법에서 각 수신 안테나로부터의 수신 신호는 주파수 영역에서 부반송파 단위로 결합하며, 잡음과 간섭 전력을 고려한 MRC(Maximum Ratio Combining)를 적용한다. 잡음과 간섭 전력은 채널의 제한된 지연 확산에 기인하는 주파수 대역에서의 상관특성(coherency)을 이용하여 상관성이 큰 일정구간 이내의 부채널에 대해 잡음과 간섭 전력의 평균을 취함으로써 더 정확한 추정치를 얻는다. IEEE 802.11a 무선 LAN 규격에서 모의실험한 결과 제안방법은 간섭전력을 이용하지 않는 방식에 비해 신호대잡음비를 2-3.5dB 개선하였으며, 정확하게 잡음 및 간섭 전력을 추정한 경우에 대해 1dB 이내로 접근하는 결과를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.720-725
• /
• 1991

In this thesis, the lead-lag compensator is designed to improve output characteristics of flyback zero voltage switching quasi-resonant converters. The switch and the diode are assumed ideally. And the SMPS is modelled by state equations with four operation modes. And the model for controller design is also achived by using a state space averaging method, which is continuous time average of state variables every period. The lag, the lead and the lead-lag compensator is designed the SMPS respectively. The time domain analysis and the frequency domain analysis are done for each compensated circuit. It is possible increasing the phase margin and improving the transient response by the compensators. The phase lag compensator has small overshoot comparatively. But the bandwidth is narrower than the others, so it has longest settling time. For the phase lead compensator, the response come to steady-state within short period. But the overshoot is the largest due to its large peak gain. Finally, the phase lead-lag compensator has medium characteristics in the overshoot and the settling time.

• 한국항공우주학회지
• /
• 제45권1호
• /
• pp.30-35
• /
• 2017

본 연구에서는 디지털 영상 상관 기법을 이용하여 알루미늄 하니콤 샌드위치 보의 고유 진동수를 계측하였다. 고속 디지털 카메라를 이용하여 보의 진동 영상을 획득하고 디지털영상 상관 기법을 이용하여 변위를 계산하였다. 시간 영역에서의 변위 데이터를 고속 퓨리에 변환하여 주파수 영역의 응답으로 변환하였다. 랜덤 가진에 따른 주파수 영역에서의 잡음을 줄이기 위하여 스펙트럼 평균화 기법과 Savitsky-Golay 디지털 필터를 사용하였다. 가속도계를 이용한 기존의 방법 및 유한요소 해석 결과와의 비교를 통하여 방법의 정확성을 확인하였다. 결론적으로 고속 디지털 카메라와 디지털 영상 상관 기법을 이용하는 새로운 방법은 구조물의 진동을 잘 측정할 수 있음을 보였고, 센서를 부착하기 어려운 바이오 구조 등의 진동 계측에 적용할 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1123-1125
• /
• 2002

In this paper, interleaved boost converter is applied as a pre-regulator in switch mode power supply. Interleaved Boost Power Factor Preregulator (IBPFP) can reduce input current ripple as a simple voltage control loop only without inner current loop, because input current is divided each 50% by two switching devices. IBPFP can be classified as three cases from duty ratio condition in continuous current mode and be carried out state space averaging small signal modeling. According to modeling, the PID controller is applied and voltage control loop is constructed for suitable design condition. From frequency domain analysis, it is verified that control system is satisfied with design condition of switch mode power supply.

• Smart Structures and Systems
• /
• 제4권3호
• /
• pp.343-365
• /
• 2008

In this study, the frequency domain method which utilizes the evaluation of changes in the structural mode shape is adopted to identify regions which contain localized damages. Frequency response function (FRF) values corresponding to the modal frequency, analogous to the mode shape coefficients, are used since change in natural frequency of the system is usually insignificant for localized damage. This method requires only few sensors to obtain the dynamic response of the structure at specific locations to determine the FRF via fast-Fourier transform (FFT). Numerical examples of an aluminum plate, which includes damages of varying severity, locations and combinations of multiple locations, are presented to demonstrate the feasibility of the method. An experimental verification of the method is also done using an aluminum plate with two different degrees of damage, namely a half-through notch and a through notch. The inconsistency in attaining the FRF values for practical applications due to varying impact load may be overcome via statistical averaging, although large variations in the loading in terms of the contact duration should still be avoided. Nonetheless, this method needs special attention when the damages induce notable changes in the modal frequency, such as when the damages are of high severity or cover more extensive area or near the boundary where the support condition is modified. This is largely due to the significant decrease in the frequency term compared to the increase in the vibration amplitude. For practical reasons such as the use of limited number of sensors and to facilitate automation, extending the resolution of this method of identification may not be efficient. Hence, methods based on wave propagation can be employed as a complement on the isolated region to provide an accurate localization as well as to trace the geometry of the damage.