• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.451-460
• /
• 2006

Since low earth orbit (LEO) satellite constellations have important advantages over geosynchronous earth orbit (GEO) systems such as low propagation delay, low power requirements, and more efficient spectrum allocation due to frequency reuse between satellites and spotbeams, they are considered to be used to complement the existing terrestrial fixed and wireless networks in the evolving global mobile network. However, one of the major problems with LEO satellites is their higher speed relative to the terrestrial mobile terminals, which move at lower speeds but at more random directions. Therefore, handover management in LEO satellite networks becomes a very challenging task for supporting global mobile communication. Efficient and accurate methods are needed for LEO satellite handovers between the moving footprints. In this paper, we propose a new seamless handover management scheme for LEO satellites (SeaHO-LEO), which utilizes the handover management schemes aiming at decreasing latency, data loss, and handover blocking probability. We also present another interesting handover management model called satellite mobility pattern based handover management in LEO satellites (PatHO-LEO) which takes mobility pattern of both satellites and mobile terminals into account to minimize the handover messaging traffic. This is achieved by the newly introduced billboard manager which is used for location updates of mobile users and satellites. The billboard manager makes the proposed handover model much more flexible and easier than the current solutions, since it is a central server and supports the management of the whole system. To show the performance of the proposed algorithms, we run an extensive set of simulations both for the proposed algorithms and well known handover management methods as a baseline model. The simulation results show that the proposed algorithms are very promising for seamless handover in LEO satellites.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.59-66
• /
• 2000

As multimedia applications become popular, computers increasingly require high-speed DSP for 3-DIM computer graphic. In this Paper, a Macro-cell Library of conditional select adder/subtracter is proposed for DSP within high speed and low power consumption. Using, this design method, we are able to obtain an auto generation of the adder or(and) subtracter from 8-bit to 64-bit. The proposed adder/subtracter has been fabricated with a 0.25${\mu}m$, single-poly, five-metal, N-well CMOS technology. From the experimental results, delay time is 3.43ns, and the power consumption is 42.8${\mu}w$/MHz at the input frequency of 50MHz, at 2.5V single power supply, in case of the 32-bit adder/subtracter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.152-160
• /
• 2008

In this paper, we analyze the performance of a direct-conversion UHF RFID reader with the range correlation effects of the phase noise. Since a UHF RFIB system uses the same oscillator to generate the transmitted carrier and the local oscillation, the periodic interference and phase noise reduction effects occur due to time delay between two signals. Through exact theory and simulation, we verify how to cancel the periodic interference phenomena using I/Q diversity combining technique. And, we analyze phase noise reduction effects due to range correlation as a function of the tag-reader distance and the offset frequency Using these results, we simulate the symbol-error-rate performance with respect to phase noise with and without range correation effects. We show that the phase noise of the local oscillator has little effect on the symbol-error-rate performance because of phase noise reduction by range correlation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.333-339
• /
• 1999

It is well recognized that ultrasonic technique is one of the most common and reliable nondestructive evaluation techniques for quantitative estimation of defects in structures. For the quantitative and accurate estimation of internal defects. the characteristics of scattered ultrasonic wavefields must be understood. In this study. the scattered near-field and far-field due to a circular cavity embedded in infinite media subjected to incident SH-waves were calculated by the boundary element method. The frequency response of the scattered ultrasonic far-field was transformed into the time-domain signal by obtaining its inverse Fourier transform. It was found that the amplitude of time-domain signal decreases and its time delay increases as the distance between the detecting point of ultrasonic scattered field and the center of internal cavity increases.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.229-251
• /
• 2012

Guided waves have shown a great potential for structural health monitoring (SHM) applications. In contrast to traditional non-destructive testing (NDT) methodologies, a key element of SHM approaches is the high process of automation. The monitoring system should decide autonomously whether the host structure is intact or not. A basic requirement for the realization of such a system is that the sensors are permanently installed on the host structure. Thus, baseline measurements become available that can be used for diagnostic purposes, i.e., damage detection, localization, etc. This paper contributes to guided wave-based inspection in anisotropic materials for SHM purposes. Therefore, computational strategies are described for both, the solution of the complex equations for wave propagation analysis in composite materials based on exact elasticity theory and the popular global matrix method, as well as the underlying equations of two active damage localization algorithms for anisotropic structures. The result of the global matrix method is an angular and frequency dependent wave velocity characteristic that is used subsequently in the localization procedures. Numerical simulations and experimental investigations through time-delay measurements are carried out in order to validate the proposed theoretical model. An exemplary case study including the calculation of dispersion curves and damage localization is conducted on an exemplary unidirectional composite structure where the ultrasonic signals processed in the localization step are simulated with the spectral element method. The proposed study demonstrates the capabilities of the proposed algorithms for accurate damage localization in anisotropic structures.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.31-41
• /
• 2014

This paper proposes a virtual mobile ad-hoc network (VMANET) model that automatically divides heterogeneous mobile devices of a MANET into a number of network groups depending on the communication capacity(data rate) of different network operational models such as IEEE 802.11g, IEEE 802.11b, and Frequency Hopping. In addition, it supports a distinct routing protocol for each network group of VMANETs, resulting in running multiple routing protocols concurrently on different groups of VMANETs. To reduce the network congestion and improve the network load balance, a default MANET gateway is configured in each VMANET and these gateways are responsible for integrating the MANET and IP networks. Experiment results show that the proposed model outperforms the conventional IMANET by significantly increasing throughput and reducing network congestion and network delay.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.340-343
• /
• 2008

The Soya Warm Current (SWC) is a coastal boundary current, which flows along the coast of Hokkaido in the Sea of Okhotsk. Seasonal and subinertial variations in the SWC are investigated using data obtained by high-frequency (HF) ocean radars, coastal tide gauges, and a bottom-mounted acoustic Doppler current profiler (ADCP). The HF radars clearly capture the seasonal variations in the surface current fields of the SWC. The velocity of the SWC reaches its maximum, approximately 1 m/s, in the summer, and becomes weaker in the winter. The velocity core is located 20 to 30 km from the coast, and its width is approximately 50 km. The almost same seasonal cycle was repeated in the period from August 2003 to March 2007. In addition to the annual variation, the SWC exhibits subinertial variations with a period from 10-15 days. The surface transport by the SWC shows a significant correlation with the sea level difference between the Sea of Japan and Sea of Okhotsk for both of the seasonal and subinertial variations, indicating that the SWC is driven by the sea level difference between the two seas. Generation mechanism of the subinertial variation is discussed using wind data from the European Centre for Medium-range Weather Forecasts (ECMWF) analyses. The subinertial variations in the SWC are significantly correlated with the meridional wind component over the region. The subinertial variations in the sea level difference and surface current delay from the meridional wind variations for one or two days. Continental shelf waves triggered by the meridional wind on the east coast of Sakhalin and west coast of Hokkaido are considered to be a possible generation mechanism for the subinertial variations in the SWC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.21-27
• /
• 2002

When decision-directed channel estimation is used for QAM-OFDM systems, the optimal shape of the two-dimensional filter depends on the amplitudes of the modulated symbols as well as the channel characteristics such as delay spread, Doppler frequency, and signal-to-noise ratio. While most conventional channel estimation methods did not consider the amplitudes of the modulated symbols because of the large computational complexity, we propose a simple channel estimation method for multi-level-amplitude-modulated systems. The proposed method can effectively reduce the noise variance of the estimates with small-sized filtering and there is a possibility of reducing the implementation cost and producing better results by avoiding the bias due to large filter sizes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.45-53
• /
• 2015

Adaptive support-weight based algorithm can produce better disparity map compared to generic area-based algorithms and also can be implemented as a realtime system. In this paper, we propose a realtime system based on geodesic support-weight which performs better segmentation of objects in the window. The data scheduling is analyzed for efficient hardware design and better performance and the parallel architecture for weight update which takes the longest delay is proposed. The exponential function is efficiently designed using a simple step function by careful error analysis. The proposed architecture is designed with verilogHDL and synthesized using Donbu Hitek 0.18um standard cell library. The proposed system shows 2.22% of error rate and can run up to 260Mhz (25fps) operation frequency with 182K gates.