• Journal of Information Processing Systems
• /
• v.18 no.4
• /
• pp.587-598
• /
• 2022

To increase building change recognition accuracy, we present a deep learning-based building change detection using remote sensing images. In the proposed approach, by merging pixel-level and object-level information of multitemporal remote sensing images, we create the difference image (DI), and the frequency-domain significance technique is used to generate the DI saliency map. The fuzzy C-means clustering technique pre-classifies the coarse change detection map by defining the DI saliency map threshold. We then extract the neighborhood features of the unchanged pixels and the changed (buildings) from pixel-level and object-level feature images, which are then used as valid deep neural network (DNN) training samples. The trained DNNs are then utilized to identify changes in DI. The suggested strategy was evaluated and compared to current detection methods using two datasets. The results suggest that our proposed technique can detect more building change information and improve change detection accuracy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.765-781
• /
• 2000

The purpose of this study was to compare the screw loosening characteristics of three avail-able cementation type abutments: one-piece cementation type abutment; two-piece cementation type abutment using titanium abutment screw; two-piece cementation type abutment using gold abutment screw. Two implant supported three-unit superstructures were fabricated using a pair of 3 kinds of abutments for each experimental model. Cyclic loading was applied on the specimen, and made to stop when the superstructure showed movement over threshold range. The loaded cycle was counted until the machine stopped. Frequency analysis was done to measure the change of natural frequency before and after the application of cyclic load and to find the effect of screw loosening on the change of natural frequency. The specimen assembly was modeled to perform the finite element analysis to see the distribution of the stress induced by the application of preload over the screw joint and to compare the pattern of the distribution of stress induced by the external force with the change of the preload condition. The following results were obtained: 1. The failure loading cycle of two-piece cementation type abutment using gold screw was significantly greater than those of the other groups. 2. One-piece cementation type abutment applied to multi-unit restoration case did not show greater resistance to screw loosening compared to two-piece cementation type abutments. 3. Frequency analysis showed decrease in natural frequency when screw loosening occured.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.184-186
• /
• 2003

Power systems must be operated within limits that will ensure adequate generation and transmission capacity to avoid cascading. In developing a set of operations limits, it is important to do so within a general framework in order to ensure that the operating objectives are met. In the this regard, when the system experiences a generation-load imbalance, the principles of sound operation will be maintained by bringing under control an unscheduled power flow condition as quickly as possible. This paper presents load shedding application which responds both to frequency and to rate of change of frequency. Its application is in the operating situation of load suddenly in excess of generation, either because of generator or other equipment failure. A scheme which is able to utilize rate of change of frequency as well as frequency itself is an improvement over existing scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.918-924
• /
• 2013

In a conventional power system, the frequency is recovered to the nominal value by the inertial, primary, and secondary responses of the synchronous generators (SGs) after a large disturbance such as a generator tripping. For a power system with high wind penetration, the system inertia is significantly reduced due to the maximum power point tracking control based operation of the variable speed wind generators (WGs). This paper proposes a virtual inertial control for a wind power plant (WPP) based on the maximum rate of change of frequency to release more kinetic energy stored in the WGs. The performance of the proposed algorithm is investigated in a model system, which consists of a doubly fed induction generator-based WPP and SGs using an EMTP-RV simulator. The results indicate that the proposed algorithm can improve the frequency nadir after a generator tripping. In addition, the algorithm can lead the instant of a frequency rebound and help frequency recovery after the frequency rebound.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.129-135
• /
• 2020

This study relates to a characteristic change and frequency correction method according to the temperature sensor position of an oven-controlled crystal oscillator (OCXO) using a 10 MHz SC-CUT crystal. Although there are several methods of manufacturing the previous high-precision 10MHz OCXO, the present study shows that the frequency stability characteristics against external temperature changes can be improved simply by adjusting the position of the temperature sensor. Factors that affect the frequency characteristics of the OCXO include the temperature transmitted to the crystal, the voltage applied to the crystal, and the capacitance constituting the oscillation circuit. The amount of change in frequency due to these factors was measured, and the change in the correction value of the OCXO output frequency was investigated by measuring the temperature inflection point and changing the capacitor value.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.230-238
• /
• 2011

Consumers' expenditure is getting larger on children due to their parents' compensation for increase of double-income family life and decrease of birth rate caused by high economic growth. Increase of demand on children items in the market leads the necessity of development of furniture for children. This study is aimed to design children chairs that meet the environment for children. In this study, the age of children is defined to be 5~7 years old. In order to investigate what causes environment change, this study covers roughly change of environment, change of learning program and use of environment-friendly material. In such scope, we drew out the factors that the chairs for children shall be equipped with. Case studies were done through such drawn factors. The scope of the furniture for children is limited to the chairs for children among the ones made in either Korea or overseas. As a result, we could draw out such keyword of the furniture as storage, mobility, environment-friendly, object style image, preferred color, functionality and safety, based on which we could plan the design and make the final result through high frequency round molding manufacturing process.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.127-130
• /
• 2005

In this paper, we investigated the change of recognition distance according to the resonance frequency of the transponder for the ISO 14443 Type A 13.56MHz RFID(Radio Frequency IDentification) system. We made thirteen transponders of the same size. The dimension of the transponder is $84.65mm{\times}53.00mm{\times}0.45mm$. We measured the resonance frequency by means of an inductive coupling. The measured resonance frequencies were between 12.9MHz and 17.3MHz. We measured the maximum distances where the transponder's USN(Unique Serial Number) was recognized and the subcarrier was observed. The measurement results show that we can obtain good performance when the Type A transponder has the resonance frequency around 14.2MHz for the given case.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.146-149
• /
• 2003

To control the position, velocity and torque of the ultrasonic motor, a great variety of method are proposed such as the amplitude, phase difference, frequency and so on. In the case of phase difference method, it has some advantages: it can control the direction and velocity of rotation only adjusting the phase difference and it has wide control-band. During the USM driving on adjusting phase difference, its characteristic was transformed by the change of resonance-frequency of stator, which means that the resonance frequency is different according to the phase difference. Consequently, we need to set up the most suitable driving frequency according to each phase difference.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.963-968
• /
• 2004

Free vibration analysis of helical spring with crack was studied. Natural frequency changes due to the crack was analyzed with respect to crack locations. The effect of crack on natural frequency was decreased as crack location is further from the fixed end of a spring. The frequency change was larger in rectangular-shaped spring than that in circular-shaped spring. It was found that experiment may not be appropriate to determine the presence of crack because no significant natural frequency change can be shown by experiment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.47-51
• /
• 2000

To make a practical application of a micro-strain sensors with ultrahigh sensitivity, a strain on electrical properties of micro-patterned amorphous (Fe\ulcornerco\ulcorner)\ulcornerSi\ulcornerB\ulcorner films had influenced on the impedance over frequency range from 1 MHz to 1 GHz. Reflecting excellent magnetomachanical couping properties of films, high frequency impedance was subject to change sensitively by a strain : a change in impe-dance of 39% was observed at 200 MHz applied a strain of 224$\times$10\ulcorner. To determine a optimum shape of micro-patterned films, film impedance was analyzed by virtue of its constitutive components of resis-tance and reactance. Result was shown that reduction of the resistance term(hence increase of resultant reactance term) of impedance is more effective for enhancing the strain sensitivity of films at relatively low frequency range.