• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.9-16
• /
• 2010

Roughness is the most important factor to maintain the road performance, and affects greatly on the design life in Jointed Plain Concrete pavements. Also, the factors the evaluate pavement‘s commonality is the three method such as functionality, safety and structural performance. In evaluating function of road, representative factors is the roughness, which has been used to determine maintenance time as key standard. As research for roughness is absence in pavement design. Applied roughness-model had a low-reliability in Korea. Therefore, it is needed to develop reliable model in road roughness. In this research, uniform specific is applied to distribute them after selecting the concrete pavements. Concrete pavement is divided by sections of 238. Total length of this sections has 281km and account for 16% of total road length in korean concrete pavements for selected sections. Considering the korean roughness-model, the evaluation of roughness is performed for the freezing index, average annual rainfall, condition for the base, the amount of traffic as well as spalling(%), cracking(%), age(year) at the selected section at the selected section. Also, additional sections is selected to evaluate various age which affects on the roughness. As a result of the analysis, it showed that spalling(%), cracking(%), age(year), and the condition of the base affected road roughness. When the correlation with the road roughness was analyzed, the reliable model for road roughness was proposed, and the ratio that can explain road roughness was R2-68.8% and P value-0 which is statistically meaningful.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.667-675
• /
• 2006

Concrete is much more easily damaged by various parameters than by the only one and performance reducing mechanism grows more complicated in that condition. In addition, the factors which really act in concrete structure tend to be activated in turn and the degradation of concrete is very rapidly progressed. The purpose of this study is to evaluate the properties of polymer cement mortars under combined cures. The polymer cement mortars are prepared with various polymer types, polymer-cement ratios and cement-fine aggregate ratio, and tested for compressive and flexural strengths, accelerated carbonation, chloride ion penetration and acid resistance test, and freezing-thawing test. The properties of polymer cement mortars under combined cures is discussed. From the test results, polymer cement mortars have superior strengths compared with plain cement mortar under combined cures. The strengths of polymer cement mortars are markedly increased at curing condition II and V, however strengths are not improved at curing condition I and IV irregardless of polymer types. The carbonation and chloride ion penetration depths of polymer cement mortars tend to decrease in curing conditions, III-C, IV-B, V-A order, and decrease with increasing polymer cement ratios. It is concluded that polymer cement ratio of 10 to 15% are considered optimum for the preparation of such polymer cement mortars.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.128-135
• /
• 2016

In the current concrete structure of the highway is still the major problem most of concrete deterioration caused by the freeze-thaw and deicing salt, which is of issues that are not completely resolved. In particular, a single freezing event does not cause much harm, durability of concrete under multi-deterioration environment by repeated freeze-thaw and deicing salt is rapidly degraded and reduce its service life. In this study, the exposure environmental condition according the regional highway points were established. The damage condition and chloride content of the concrete at general and severe environmental exposure condition were also investigated. In addition, the experimental test of chloride ion permeability, scaling resistant and freeze-thaw resistance were carried out to improve the durability of the mechanical placing concrete of subsidiary structure. According to the results of this study, in observation of concrete surface condition, the concrete exposed by severe environmental condition showed broad ranges of damage with high chloride contents. Meanwhile, the water-binder(W/B) ratio and the less water content, and fly ash concrete than the specified existing mix proportion is significantly improved the durability. Also, the optimal mix proportion derived for test is satisfied the strength and air contents, water-binder ratio, and durability criteria of concrete specifications, as well as service life seems greatly improved.

• Radiation Oncology Journal
• /
• v.18 no.3
• /
• pp.200-204
• /
• 2000

Purpose : We already reported the results that aqueous extract of Korean ginseng roots showed a marked cytotoxicity. In this study, we investigated whether combined ginseng product with X-irradiation increase the cytotoxicity of tumor cells than X-irradiation or not. Materials and Methods : Fifty gram of Korean ginseng powder mixed with 1 L of distilled water was extracted with reflux flask under condition of $100^{\circ}C$ for 5 hrs. This aquaous ginseng extract was filtered, centrifuged and then was freezed under condition of $-90^{\circ}C$ for 16-18 hrs. The freezing extract was dried with freeze drier, and then diluted. X-irradiation was given to tumor cells by 6 MeV linear accelerator. The cytotoxicity of ginseng in vitro was evaluated from its ability to reduce the clonogenecity of fibrosarcoma (FSa II) cells. In X-irradiation alone group, each 2, 4, 6 and 8 Gy was given to tumor cells. In X-irradiation with ginseng group, 0.2 mg/mL of ginseng extract was exposed to tumor cells for 1 hour before X-irradiation. Results : The yield for 50 g of ginseng extract which was treated with freezing drier was 3.13 g($6.3\%$). Cytotoxicity In vitro was measured as survival fraction which was judged from the curve, at ginseng concentration of 0.001, 0.01, 0.1 and 1 mg/mL were $0.89\pm0.04$, $0.86\pm0.06$, $0.73\pm0.01$ and $0.09\pm0.02$, respectively. Survival fraction at X-irradiation alone of 2, 4, 6 and 8 Gy were $0.81\pm0.07$, $0.42\pm0.08$, $0.15\pm0.02$, $0.03\pm0.01$, respectively. But, suwival fraction in combined group of X-irradiation and ginseng (0.2mg/ml) at each same radiation dose were $0.28\pm0.01$, $0.18\pm0.03$, $0.08\pm0.02$, $0.006\pm0.002$, respectively (p<0.05). Conclusion : The yield for ginseng extract which was treated with freezing drier was $6.3\%$. Cytotoxicty of Fsa 11 in combined ginseng with X-irradiation group was increased than that of X-irradition alone group, and its enhancing effect seemed to be added.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.29-33
• /
• 2021

Purpose Plasma renin activity (PRA) test is important for the diagnosis of primary aldosteronism. PRA is an easily deformed substance in vitro and affected by temperature changes. Laboratory of ASAN medical center has consistently found that there was a difference between the initial and re-experimental results. We compared and analyzed the differences in PRA test results according to the sample storage status. Materials and Methods The measurement of PRA was performed by using the radioimmunoassay. From August to September 2020, 43 PRA re-test samples were tested with different sample storage condition. The first group was re-examined by freezing the plasma-separated samples at -18℃, and the second group was re-examined with refrigerated EDTA sample. Also, additional tests were conducted on 13 PRA samples to verify the effect on thawing temperature differences in plasma-separated samples. The same samples were divided into two parts and stored frozen at -18℃, respectively, and thawing samples in room temperature and those in refrigerator were were conducted. Each result was compared and analyzed based on the initial experimental results. Results The results of re-examination after frozen storing plasma separation samples showed a lower correlation than the results of re-examination with EDTA plasma samples in refrigerator. When calculating the percentage based on the initial test results, the average percentage of each was 404.9% and 133.8%. The correlation coefficient was also R=0.8501 and R=0.9966, respectively, showing a higher correlation between plasma in the refrigerated sample EDTA tube. In comparison experiments with differences in thawing temperature, average percentage of the results of initial test and room temperature thawing was 94.3% and the average percentage of the results of refrigerated thawing was 88.0%. After again freezing the sample, the average percentage of the second room temperature thawing result is 107.5%, and the second refrigerated thawing group is 112.7%. Both groups showed an increase from first thawing. Conclusion A comparative analysis of retesting according to differences in sample storage methods in PRA tests showed a higher correlation between the results of retesting of the refrigerated EDTA plasma. And repeated freezing and melting of plasma separation samples, regardless of temperature during defrosting, has been shown to affect results. Therefore, retest of PRA should re-collect plasma from original EDTA plasma to increase reproducibility.

• Journal of Power System Engineering
• /
• v.17 no.3
• /
• pp.44-49
• /
• 2013

The refrigerating system are high efficiency and comfortable due to the automation of the system as well as enhance energy saving are contributing to driving system. Previous study the rotational frequency of the compressor was confined to the fixed condition have changed load of evaporator and condenser related about the refrigerator performance characteristic according to the evaporation load and condensation load change tries to be analyze through the experiment. The useful data for the economic driving of the freezing apparatus tries to be drawn. Consequently, it confirmed that refrigerant in the compressor overheated and as the evaporation load increased the specific volume was increased and the coolant circulation rate decreased. In confirmed that condensation load increased the compression ratio and discharge gas temperature increased. It reduced the low-temperature efficiency and condensation calorie and the quality factor was decreased.

• Journal of the Korean Institute of Gas
• /
• v.20 no.3
• /
• pp.38-45
• /
• 2016

In this study, we found that the release and dispersion of ammonia can create hazardous atmospheres using FLACS software. In General, ventilation or gas detector installations are recommended as preventive measures to control explosion incidents. However, the ventilation installations cannot be applicable to the refrigeration facility that uses ammonia as refrigerating medium, because the freezing room should be sealed. From the accident investigation of the explosion case, we suggested that all electronic devices were needed to be switched by explosion proof devices, and communication facility was also needed to be installed to announce to all employees within a building in case alert condition like ammonia releases occurred.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.14 no.3
• /
• pp.110-117
• /
• 2006

Ice adhesion or cohesion leads to the decrease of the performance of ice making system, especially to dynamic type ice thermal storage system (DISS) which mainly forms ice from the flow of an aqueous solution. The ice adhesion is influenced by various parameters associated with operating or geometric condition. In this study, the influence on an adhesion of ice to the characteristic of cooling surface and to composition of an aqueous solution was fundamentally observed by using batch type cooling device,. a beaker. Three patterns of solution in each beaker were cooled with brine. Moreover, the characteristic of cooling surface on each beaker was distinguished to coating materials. Stirring power as a degree of the ice adhesion was measured. The stirring power to cooling heat transfer rate in each beaker was compared. As a result, the lowest stirring power of 8.9 W with non-adhesion of ice, was shown in the case of the aqueous solution of EG(4) + PG(1.5) + 1,6HD(1.5). in PE coating beaker.

• Journal of radiological science and technology
• /
• v.19 no.2
• /
• pp.79-83
• /
• 1996

The thermoluminescence(TL) response in changing annealing condition, triboluminescence, and darkroom temperature for $Mg_2SiO_4$:Tb phosphor are examined. The experimental results are summerized as follows : 1. The uniformity of TL intensity is better In the disinfected $Mg_2SiO_4$ : Tb than in contaminated one. 2. The triboluminescence of $Mg_2SiO_4$ : Tb is almost not detected even if numbers of $Mg_2SiO_4$ : Tb falling are increased. 3. The fading effect of $Mg_2SiO_4$ : Tb is scarcely affected by freezing room. The followings are resulted from the study. The disinfected $Mg_2SiO_4$ : Tb phosphor should be used in the dose measurement and the immediate reading for $Mg_2SiO_4$ : Tb after exposure is better. And if the reading is not immediately taken, a law darkroom temperature for $Mg_2SiO_4$ : Tb storage is recommended.

• Journal of Food Hygiene and Safety
• /
• v.10 no.2
• /
• pp.103-109
• /
• 1995

Microbiological and organoleptic qualities of boiled anchovies were evaluated during storage for 8 months at different temperatures and packaging methods. Microbial populations of marketing samples were 106~107 CFU/g in aerobic bacteria, 103~106 CFU/g in yeasts/molds and 103~105 CFU/g in coliforms, respectively, which were the highest in retail sample, followed by in military goods and wholesale sample. Moreover, anchovies supplied for retail sale and military goods were contaminated with sanitary indicative microbes. The samples stored at ambient condition(15~33$^{\circ}C$, RH 5$0^{\circ}C$95%) lost their marketable quaity mainly due to microbial propagation prior to 6 months, irrespective of packaging methods, corrugated-cardboard box and laminated-film(nylon 15${\mu}{\textrm}{m}$/PE 100${\mu}{\textrm}{m}$). However, cooling(5~1$0^{\circ}C$) as well as well as freezing temperatures($\leq$-18$^{\circ}C$) following laminated-film packaging were effective for keeping the organoleptic qualities of stored anchovies up to 8 months. The population of yeasts and molds was shown the quality-indicative criteria for stored anchovies and their critical levels were 5.00 log counts/g, showing a higher negative-correlationship(r=-0.901) with changes in organoleptic quality.