• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1321-1326
• /
• 2008

A study on the heat and mass transfer for the drying time in spray freezing drying process was experimentally presented in this paper. A spray freezing dryer for the production of an inhalable powder medicine is developed and an albumin solution as protein specimen is adopted. The freeze-drying for the albumin solution is tested in three different height of the particles piled up in a tray such as 2 mm, 5 mm, 7 mm, and the drying time is estimated as 10 h, 15 h, 22 h. From this results, the correlation is suggested and the drying time with various height of the particles piled up in a tray can be estimated. The assessment on the drying time is conducted thought a microbalance and the rate of water content is measured. The results based on temperature and weight are compared. The difference of the results happens due to the heat transfer from the lateral side of the vial. It is thought that the better estimation in drying time can be predicted by considering the heat transfer effect.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.592-598
• /
• 2013

Graphene oxide powders prepared by two different drying processes, freeze drying and spray drying, were studied to compare the effect of the drying method on the physical properties of graphene oxide powder. The graphene oxide dispersion was prepared from graphite by chemical delamination with the aid of sulfuric acid and permanganic acid, and the dispersion was further washed and re-dispersed in a mixed solvent of water and isopropyl alcohol. A freeze drying method can feasibly minimize damage to the sample, but it requires a long process time. In contrast, spray drying is able to remove a solvent in a relatively short time, though this process requires exposure to a high temperature for a rapid evaporation of the solvent. The powders prepared by freeze drying and spray drying were characterized and compared by Raman spectroscopy, X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and by an elemental analysis. The graphene oxide powders showed similar chemical compositions; however, the morphologies of the powders differed in that the graphene oxide prepared by spray drying had a winkled morphology and a higher apparent density compared to the powder prepared by freeze drying. The graphene oxide powders were reduced at $900^{\circ}C$ in an atmosphere of $N_2$. The effect of the drying process on the properties of the reduced graphene oxide was examined by SEM, TEM and Raman spectroscopy.

• 한국약용작물학회지
• /
• 제14권1호
• /
• pp.8-13
• /
• 2006

삼백초의 유효성분과 선도유지에 적합한 건조방법을 구명하고자 건조방법을 달리하여 건조시킨 후 건조방법별 유효성분 함량과 선도를 조사한 결과를 요약하면 다음과 같다. 1. 건조방법별 건조시간은 양건에 비해 열풍건조와 동결건조시 $88{\sim}93%$ 단축되었다. 건물수율은 동결건조 > 양건 > 열풍건조 순으로 높았고, 건조후 수분 함량은 양건 > 열풍건조 > 동결건조 순으로 높았다. 2. 총페놀성 화합물과 quercetin 관련물질 함량은 동결건조 > 열풍건조 > 양건 순으로 높았으며, 열풍건조후 볶음 또는 건조전 증자 처리를 함으로써 감소되었다. 항산화 활성은 동결건조에서 가장 높았고, 열풍건조와 양건 간에는 차이가 없었으며, 열풍건조후 볶음 또는 건조전 증자 처리를 함으로써 증가하여 총페놀성 화합물과 quercetin 관련물질 함량과는 다른 경향을 보였다. 3. 적색도 (a)는 동결건조 < 열풍건조 < 양건 순으로 낮았다. 4. 열풍건조시 부위별 총페놀성화합물과 quercetin 관련물질 함량은 꽃 > 잎 > 세절 > 줄기 순으로 높았으며, 항산화 활성도 유사한 결과를 나타내었다. 부위별 적색도는 잎 < 세절 < 꽃 < 줄기 순으로 낮았다. 5. 삼백초의 유효성분과 선도유지에 적합한 건조방법은 세절하여 동결건조하거나 잎과 꽃만을 열풍건조하는 것이 효과적이었다.

• 한국식품과학회지
• /
• 제35권2호
• /
• pp.329-333
• /
• 2003

Fruits of 'Manita', a red pepper cultivar, and 'HL', a cultivar bred for single-harvest, cultivated by direct sowing method were harvested simultaneously. The red fruits were freeze-, sun-, indoor-, hot-air $(65^{\circ}C)$, and excessive hot-air (50% longer time) dried. For Manita. ASTA values of freeze- and indoor-dried red pepper were the highest $(153.6{\sim}168.4)$, and those of sun- and hot air-dried ones were $119.2{\sim}131.5$. Excessive hot-air drying decreased the redness by about $9{\sim}15%$ compared to normal hot-air drying. For HL, ASTA values $(150.3{\sim}171.7)$ of indoor-dried red peppers were much higher than other dried peppers. Red pigment in HL was destroyed easily during sun drying, showing values of only $49.2{\sim}69.2$. By excessive hot-air drying, the redness did not decrease, compared to normal hot-air drying. The organic acid contents of both cultivars were higher in sun- and hot-air-dried ones than freeze- and indoor-dried ones. Copsaicinoid contents of both cultivars decreased up to 22% by excessive hot-air drying compared to normal hot-air drying. Sugar contents were lower in all drying methods other than freeze drying for both cultivars.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.295-297
• /
• 2000

A new method to evaluate erosion of biodegradable polymer, polyanhydrides, was developed. The polymer devices were prepared with the melt-casting method and weight loss was accurately measured after agitating the devices in buffers (pH 1-9), and removing the device at selected time intervals and freeze-drying the device. The erosion rate was estimated from the plot of the weight loss(%) of device as a function of time. The freeze-drying technique used in this study is particularly useful for estimating the erosion rate of biodegradable polymer.

• 한국식품조리과학회지
• /
• 제27권1호
• /
• pp.75-84
• /
• 2011

The aim of this study was to develop a convenient brown sauce product with long shelf life that has similar taste and quality characteristics with sauce used in restaurants. Response surface analysis was carried out to optimize brown sauce. Extracted brown sauce powder was subjected to hot air drying, infrared drying, freeze drying, and spray drying to determine the appropriate drying method for brown sauce manufacturing. The optimum extraction conditions were set by superimposing and reading each reaction surface that satisfied all of the sensory characteristics such as color, smell, taste, concentration, and overall preference level in order to set the optimum conditions for brown sauce production. The optimum extraction conditions for brown sauce were determined to be heating time 30 min, gelatin addition quantity 9.00%, and tomato paste addition quantity 11.25%. Reliability test showed a similar value to the predicted scope when compared to the experimental value obtained under the same conditions as the predicted value according to RSM (response surface methodology), enabling verification of the derived regression formula. Product powder of ideal brown sauce by heating, infrared radiation, freezing, and spray drying and investigate result for functional tests of color, flavor, taste, viscosity, overall acceptability and show highly acceptability on powder by infrared rays and freeze-drying methods. Especially, infrared radiation method resulted in favorable color and flavor values while freeze-drying method produced good taste and viscosity values and high overall acceptability. Therefore, infrared radiation drying method and freeze-drying method to product powder.

• 한국식품저장유통학회지
• /
• 제24권3호
• /
• pp.361-366
• /
• 2017

본 연구에서는 원적외선 건조 조건에 따른 홍삼 절편의 품질 특성을 알아보았다. TPC, TFC, DPPH의 경우 65도에서 가장 높은 값을 보였으며 이후에 감소하는 추세를 나타내었다. 건조온도를 65도로 고정한 후 0-90분 간 원적외선 건조를 진행했을 때, 60분에 약 10% 수분함량을 보였으며 TPC는 60-90분, TFC는 60분, DPPH는 75분에서 최고값을 나타내었다. 그리고 홍삼 절편에 원적외선, 열풍, 감압, 동결건조를 60분 간 처리한 후 비교했을 때, TPC와 TFC는 감압 및 원적외선 건조에서 유의적으로 높은 값을 보였으며, DPPH의 경우 열풍건조를 했을 때 가장 높은 활성을 나타내었다. 건조 방법에 따른 홍삼 절편의 색도를 비교하였을 때, L, a, b 값은 원적외선, 열풍, 감압 건조 시 감소하였고, 동결 건조 시에는 증가하였다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.115-130
• /
• 2004

Plant-based cultural assets using straw and grass as household goods of our people's have been used as indispensable tools for practical living for a very long time. However, only a limited number of artifacts were unearthed so far due to tile fragility of the material. For this reason, research on plant-based cultural properties had close to no progress, and the appropriateness of the PEG method, high-grade alcohol method, alcohol--ether-resin method, and Paraloid B-72 used in preserving plant-based cultural properties has not been sufficiently investigated. Therefore, this study examined the weight change rate by applying the methods of Primal MC-76 and vacuum freeze-drying used mostly as a earth-layer hardening material among PEG and acrylic resin, which are applied widely for preservation of waterlogged archaeological wood, as a means to preserve plant-based cultural properties along with the examination of the subject material, and an experiment was also performed on moisture absorption. The findings as a result were, first, the plant-based material being studied was found to be Typha (Typha orientalis Presl). Secondly, the weight change experiment applying $PEG\#400$ and $PEG\#4000$ confirmed a steady increase of weight if PEG -2Step is used for treatment. Third, in preserving all subject materials with soil, treatment with $PEG\#4000$, Primal MC-76, and vacuum freeze-drying showed that tile vacuum freeze-drying method resulted in the largest or $20\%$ reduction in weight, while Primal MC-76 resulted in $18\%$ and $PEG\#4000$ in $8\%$ of weight reduction. It was concluded that, considering the stability of soil measurement, this came to be because resin permeation was carried out along with tile drying process. Fourth, the weight changes were found to be around $10\%$ in various humidity conditions after the preservation treatment. The greatest weight change rate was seen in the case of $PEG\#4000$, particularly having chemicals gush out in a high humidity (RH $84\%$ or higher) environment. In the case of Primal MC-76 and vacuum freeze-drying methods, $6\~8\%$ weight changes were detected, and the lowest weight change was found in the case of the vacuum freeze-drying method. Fifth, as for color changes after treatment, blackening occurred most strongly with $PEG\#4000$, while Primal MC-76 and vacuum freeze-drying manifested colors closest to dry straw or grass. However, the texture of straw was not very evident in the case of Primal MC-76, due to a glossy surface, but vacuum freeze-drying was found to offer tile best result in terms of texture. Putting together the results of the above experiments, vacuum freeze-drying presented after being treated with PEG2-Step the most stabilized changes in weight, while it offered the smallest change in color as well.

• Archives of Pharmacal Research
• /
• 제29권8호
• /
• pp.707-711
• /
• 2006

Bifidobacteria-loaded alginate poly-l-lysine microparticles (bap microparticles) were prepared using an air atomization method and then freeze-dried. The viability of the bap microparticles was investigated as a function of the amount of the bifidobacteria cultures, and the addition of a yeast extract, cryoprotectants, antioxidants and neutralizer. The size of the bap microparticles with and without the bifidobacteria was $84.8{\pm}28.5\;{\mu}m$ ($mean{\pm}standard$ deviation) and $113.1{\pm}38.5\;{\mu}m$, respectively. The surface morphology was slightly ellipsoid and wrinkled regardless of the incorporating bifidobacteria. The viability gradually decreased with increasing freeze-drying time. Free-flowing powdered bap microparticles were obtained at least 12 h after freeze-drying the wetted slurry of bap microparticles. However, the particles tended to aggregate when either lactose or ascorbic acid was added. The addition of a yeast extract, cryoprotectants (glycerol and lactose), antioxidants ($NaHSO_3$ and ascorbic acid) and neutralizer $(Mg_3(PO_4)_2)$ resulted in a significantly higher viability of the bifidobacteria in the bap microparticles after freeze-drying (0.34-1.84 log) compared with the culture alone.

• 한국식품영양학회지
• /
• 제32권6호
• /
• pp.620-629
• /
• 2019

To examine the possibility of ear mushroom (EM) as a source of natural vitamin D, the UVB (ultraviolet B) was treated according to sample drying status, drying methods before UVB treatment and harvest time. And then, vitamin D₂ and ergosterol contents were investigated. According to the sample drying status, the vitamin D₂ contents of fresh and freeze-dried EM (whole) increased to 4,634.4~4,780.9 ㎍/100 g D.W. (dry weight) under UVB dose 52.5~70.0 kJ/㎡ and above 18,693.1 ㎍/100 g D.W. under above 105 kJ/㎡, respectively. By drying methods before UVB treatment, vitamin D₂ contents of EM powder (below 500 ㎛) that dried in the vinyl house and freeze-dryer increased to 4,886.2~5,132.9 ㎍/100 g D.W. under above 105 kJ/㎡ and 17,103.7 ㎍/100 g D.W. under 70 kJ/㎡, respectively. Ergosterol content decreased with increasing UVB dose in all experiments. According to the harvest time, vitamin D₂ content under UVB dose 210 kJ/㎡ showed marked difference and in order of June, July, August, October and April. As for the results, the optimum harvest time, drying method before UVB treatment, sample size, UVB dose for the EM contained high vitamin D₂ content were June, freeze-drying, whole, and 105 kJ/㎡, respectively.