• 한국재료학회지
• /
• 제23권12호
• /
• pp.722-726
• /
• 2013

Freeze drying of a porous Cu-Sn alloy with unidirectionally aligned pore channels was accomplished by using a composite powder of CuO-$SnO_2$ and camphene. Camphene slurries with CuO-$SnO_2$ content of 3, 5 and 10 vol% were prepared by mixing with a small amount of dispersant at $50^{\circ}C$. Freezing of a slurry was done at $-25^{\circ}C$ while the growth direction of the camphene was unidirectionally controlled. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green bodies were hydrogen-reduced at $650^{\circ}C$ and then were sintered at $650^{\circ}C$ and $750^{\circ}C$ for 1 h. XRD analysis revealed that the CuO-$SnO_2$ powder was completely converted to Cu-Sn alloy without any reaction phases. The sintered samples showed large pores with an average size of above $100{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal walls of the large pores had relatively small pores. The size of the large pores decreased with increasing CuO-$SnO_2$ content due to the change of the degree of powder rearrangement in the slurry. The size of the small pores decreased with increase of the sintering temperature from $650^{\circ}C$ to $750^{\circ}C$, while that of the large pores was unchanged. These results suggest that a porous alloy body with aligned large pores can be fabricated by a freeze-drying and hydrogen reduction process using oxide powders.

• 한국분말재료학회지
• /
• 제25권1호
• /
• pp.25-29
• /
• 2018

Porous Cu with a dispersion of nanoscale $Al_2O_3$ particles is fabricated by freeze-drying $CuO-Al_2O_3$/camphene slurry and sintering. Camphene slurries with $CuO-Al_2O_3$ contents of 5 and 10 vol% are unidirectionally frozen at $-30^{\circ}C$, and pores are generated in the frozen specimens by camphene sublimation during air drying. The green bodies are sintered for 1 h at $700^{\circ}C$ and $800^{\circ}C$ in $H_2$ atmosphere. The sintered samples show large pores of $100{\mu}m$ in average size aligned parallel to the camphene growth direction. The internal walls of the large pores feature relatively small pores of ${\sim}10{\mu}m$ in size. The size of the large pores decreases with increasing $CuO-Al_2O_3$ content by the changing degree of powder rearrangement in the slurry. The size of the small pores decreases with increasing sintering temperature. Microstructural analysis reveals that 100-nm $Al_2O_3$ particles are homogeneously dispersed in the Cu matrix. These results suggest that a porous composite body with aligned large pores could be fabricated by a freeze-drying and $H_2$ reducing process.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.572-578
• /
• 1999

This study was conducted to investigate processing condition and characteristics of chestnut paste. The kinds of chestnut powder processed with blanching and drying of raw material were four named RH(not blanched, hot air dried), RF(not blanched, freeze dried), BH(blanched, hot air dried) and BF(blanched, freeze dried). Blanching affected the reduction of drying time in chestnut. Water absorption index of the blanched samples were higher than the nonblanched. Blanching affected the viscosity of pastes when water was added to process paste also, but drying methods did not affected to it. The proper ratio of water to the powder to process paste was 1.3 to 1.5 times in RH and RF, whereas 2.7 times in BH and BF by sensory evaluation. Soluble tannin content of paste was higher in RF and RH paste than BF and BH. Vitamin C content was the highest(88.49mg/100g) in RF paste and reducing sugar content was the highest in RF paste. Hunter's L and a values were the highest in BF and RH pastes, respectively, among the all paste samples. Volatile compounds detected from chestnutpastes were hydrocarbons, alcohols, phenols, ketones. The major volatile compound in all the pastes was 2,6 bis(1,1 dimethylethyl) 4 methyl phenol.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).

• 동아시아식생활학회지
• /
• 제16권6호
• /
• pp.724-730
• /
• 2006

Two types of powdered chungkookjang, were prepared by a hot air-drying process, and the freeze-drying, and composition and aroma patterns were examined. The fresh chungkookjang was composed of 53.8% moisture, while the hot air-dried and freeze-dried powdered chungkookjang contained 5.2% moisture, $39.3{\sim}39.4%$ crude protein, $18.6{\sim}18.7%$ crude lipid, $4.7{\sim}5.0%$ crude ash, and $31.7{\sim}32.2%$ carbohydrate. The pH of the each powered chungkookjang was similar, ranging from 6.5 to 6.7. The freeze-dried powdered chungkookjang showed the highest lightness (67.30), yellowness (59.37) while the highest redness (43.1) was observed in the hot air-dried chungkookjang. Each chungkookjang was analysed by an electronic nose with metal oxide 12 sensors and SPME-GC/MS. The response by the electronic nose was analysed by principal component analysis (PCA). The proportion of the first principal component was 90.47%, suggesting that each aroma pattern of the prepared chungkookjang was discriminated. SPME-GC/MS was used to identify the pyrazines. The percentage of pyrazines observed in the fresh chungkookjang, freeze-dried powdered chungkookjang, and hot air-dried powdered chungkookjang was 6.6, 3.8 and 15.9%, respectively. A higher overall preference was obtained from the hot air-dried powdered chungkookjang than with the freeze-dried powdered chungkookjang.

• 공업화학
• /
• 제8권1호
• /
• pp.1-7
• /
• 1997

냉동 건조에서 주기적 압력 함수의 이용은 정압에서의 건조 속도보다 더 효과적으로 나타났다. 이러한 공정의 궁극적인 목적은 건조 시간을 감소시킴으로써 에너지 비용을 줄이는데 있다. 이 연구에서 건조 시간을 감소시키기 위해 주기적 압력 함수에 대한 개념을 도입하여 건조 속도에 영향을 미치는 인자들-펄스의 형태, 압력 진폭의 크기, 중간 시간의 길이-에 대한 영향을 고려하였다. 건조 온도는 항상 $20^{\circ}C$로 일정하게 유지하였다. 그리고 펄스의 형태는 일정한 압력의 형태보다 저압에서 고압으로 압력을 변화시키는 주기를 주는 것이 더 유리함을 알 수 있었다. 또한 펄스의 진폭크기는 작을수록 그리고 중간 시간은 길수록 건조 속도가 상당히 증가되었다.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.330-335
• /
• 2009

The principal objective of this study was to investigate changes in ice dendrite size during the freezing of tuna, in order to formulate a mathematical model of ice dendrite size. The tuna was frozen via a uni-directional heat transfer. Thermogram analysis allowed us to determine the position of the freezing front versus time, which is referred to as the freezing front rate. The morphology of the ice dendrites was assessed via scanning electron microscopy after freeze-drying, and the retained pore size was measured as ice dendrites. We noted that the mean size of ice dendrites increased with the distance to the cooling plate; however, it decreased with reductions in the cooling rate and the cooling temperature. In addition, shorter durations of the freeze-drying process decreased the freezing front rate, resulting in a larger size of the ice dendrite pores that operate as water vapor sublimation channels. According to our results, we could derive a linear regression as an empirical mathematical model equation between the ice dendrite size and the inverse of the freezing front rate.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.198-202
• /
• 2020

The effect of sublimable vehicles on the pore structure of Cu fabricated by freeze drying is investigated. The 5 vol% CuO-dispersed slurries with camphene and various camphor-naphthalene compositions are frozen in a Teflon mold at -25℃, followed by sublimation at room temperature. After hydrogen reduction at 300℃ and sintering at 600 ℃, the green bodies of CuO are completely converted to Cu with various pore structures. The sintered samples prepared using CuO/camphene slurries show large pores that are aligned parallel to the sublimable vehicle growth direction. In addition, a dense microstructure is observed in the bottom section of the specimen where the solidification heat was released, owing to the difference in the solidification behavior of the camphene crystals. The porous Cu shows different pore structures, such as dendritic, rod-like, and plate shaped, depending on the composition of the camphornaphthalene system. The change in pore structure is explained by the crystal growth behavior of primary camphor and eutectic and primary naphthalene.

• 박물관보존과학
• /
• 제11권
• /
• pp.49-52
• /
• 2010

광주 신창동 저습지 출토 목제 빗은 강화제로서 세틸알콜을 이용하여 보존처리되었다. 보존처리 과정은 목제유물을 제3가부틸 알콜로 치환하고 세틸알콜을 40% 농도까지 함침시킨 후 진공동결건조하여 처리하였다. 그 결과 주목할 만한 표면결함은 없었다. 또한 54%의 중량잔존율과 길이방향 3.3%, 폭방향 2.1%, 두께방향 3.1%의 수축률을 나타내었다. 따라서 세틸알콜을 이용한 수침고목재의 보존처리가 치수안정화와 중량 잔존율 면에서 효과적이었다.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.446-450
• /
• 2012

In order to fabricate the porous Mo with controlled pore characteristics, unique processing by using $MoO_3$ powder as the source and camphene as the sublimable material is introduced. Camphene-based 15 vol% $MoO_3$ slurries, prepared by milling at $50^{\circ}C$ with a small amount of dispersant, were frozen at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $750^{\circ}C$, and sintered at $1000-1100^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $MoO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $150{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores due to the difference in the camphene growth rate during freezing process. The size of small pores was decreased with increase in sintering temperature, while that of large pores was unchanged. The results are strongly suggested that the porous metal with required pore characteristics can be successfully fabricated by freeze-drying process using metal oxide powders.