• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.80-87
• /
• 2003

This paper attempts to examine the historical changes, the characteristics and the role of free-standing wall from the viewpoint of architectural composition. After modern times the wall gets free of structure and the view of formative art changes, which become a basis of the conscious use of free-standing wall. It plays a role of getting territoriality and placeness, by defining the space at the external territory and it is used as apparatus which controls circulation and orientation externally At the same time it is used as an instrument to blur the border to make mutual intersection and plays a role of introducing and controling the environment. The free-standing wall controls the architectural form to emphasize plasticity and is used to define a geometrical frame and maintain the urban context. In view of the results so far achieved, the free-standing wall is used as general vocabulary of modulating the border of space and the architectural form since modern architecture.

• Wind and Structures
• /
• v.13 no.1
• /
• pp.83-94
• /
• 2010

Wind tunnel measurements on T-shaped free-standing walls and inclined free-standing walls have been carried out. Mean net pressure coefficients have been derived and compared with previous research. It was observed that the high loads at the free ends are differently distributed than those derived from the pressure coefficients for free-standing walls in EN 1991-1-4. In addition net pressure coefficients based on extreme value analysis have been obtained. The lack of correlation of the wind induced pressures at windward and leeward side result in lower values for the net pressure coefficients when based on extreme value analysis. The results of this wind tunnel study have been included in Dutch guidelines for noise barriers.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.195-223
• /
• 2017

This paper presents 3D numerical simulations of a Free Standing Hybrid Riser under Vortex Induced Vibration, with prescribed motion on the top to replace the motion of the buoyancy can. The model is calculated using a fully implicit discretization scheme. The flow field around the riser is computed by solving the Navier-Stokes equations numerically. The fluid domain is discretized using the overset grid approach. Grid points in near-wall regions of riser are of high resolution, while far field flow is in relatively coarse grid. Fluid-structure interaction is accomplished by communication between fluid solver and riser motion solver. Simulation is based on previous experimental data. Two cases are studied with different current speeds, where the motion of the buoyancy can is approximated to a 'banana' shape. A fully three-dimensional CFD approach for VIV simulation for a top side moving Riser has been presented. This paper also presents a simulation of a riser connected to a platform under harmonic regular waves.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.40.2-40.2
• /
• 2011

As the old saying 'nothing is complete unless you put it in final shape', although nanosheets (NSs) are a promising functional building block for various electrochemical applications, their true value cannot be realized until they are well woven into electrical conducting materials. As an effort to determine their ideal shape, in this study, a unique manufacturing route to build a layer-by-layer (LBL) structure of two-dimensionally ordered, free-standing ${\beta}$-nickel hydroxide nanosheets (${\beta}$-NHNSs) that are fully electrically addressed with single-wall carbon nanotube fabrics was demonstrated, and its capabilities were verified through a comparative study on the differences between a simple bulky and LBL-structured electrochemical cathode, representing two extreme cases. The LBL-structured cathode showed a discharging current peak that was 25 times larger than the bulky structured one measured in cyclic voltammetry, which implies that the LBL structure is near an ideal electrode configuration for NS-based electrochemical applications.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.132-137
• /
• 2000

In June, the City of Seoul held a design competition for $\ulcorner$Seoul Park$\lrcorner$in Paris to promote friendly relations with its sister city. The purpose of this paper is to articulate the design concept of a scheme submitted by the author. The author interpreted the object of this design competition as follows: if we regards a park not as one of urban planning facilities but as a space for expressing a culture, $\ulcorner$Seoul Park$\lrcorner$in Paris is a space expressing Korean culture, or a culture of the City of Seoul in Paris, France. Three points were emphasized in this scheme: 1. Physical and non-physical aspects of Korean culture, or a culture of the City of Seoul were expressed separately. In physical part, a traditional Korean garden was reappeared to express its authenticity compared to its counterpart, French classical garden - its formal and grand style. In nonphysical part, Seoul's features and its citizen's facial expression were engraved on 'free standing walls' named 'Seoul Expression'. In addition, Korean traditional and modern performing arts will be performed in a square named as 'Seoul madang' surrounded by the free standing walls. 2. A space clearly divided by the fence was necessary to distinguish a traditional Korean garden from the place which looks like an amusement park. Traditional wall, mounding and pine tree groves were included. 3. Bamboo grove with the way taking a walk was introduced. The author expected that Parisian feels oriental mystery, the sound of wind, and the time lag of past and present in this sounding bamboo grove.

• Wind and Structures
• /
• v.14 no.5
• /
• pp.449-463
• /
• 2011

Drag forces on a rectangular louvered panel, both as a free-standing structure and as a component in a generic low-rise building model, were obtained in a wind tunnel study. When tested in a building model, the porosity ratio of the wall opposite the louvered panel was varied to investigate its effect on the loading of the louvered panel. Both mean and pseudo-steady drag coefficients were obtained. Comparisons with the provisions for porous walls in contemporary loading standards indicate that for some opposite wall porosity ratios, the standards specify significantly different wind loads (larger and smaller) than obtained from this wind tunnel study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.3960-3969
• /
• 1996

A fluid flow inside a circular cylinder subject to horizontal and circular oscillation is analyzed theoretically. Under the assumption of small-amplitude oscillation, the governing equations take linear forms. The velocity field is obtained in terms of the first kind of Bessel function of order 1. It was found that a particle describes an orbit close to a circle in the central region and an arc near the side wall. We also obtained the Stokes' drift velocity induced by the traveling wave along the circumferential direction. The Eulerian streaming velocities at the edge of the bottom and side boundary layers were also obtained. It was shown that the vertical component of the steady streaming velocity on the side wall is almost proportional to the amplitude of the free surface motion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.247-252
• /
• 2009

With the increasing use of tower cranes higher than free standing height, the importance of lateral support is also growing. Since the fall of 43 tower cranes hit by the last typhoon 'Mami' in 2003, regulations and concerns about safety of construction equipment have increased and construction laws regarding lateral support have been strengthened. In Korea, where there are many large-scale apartment housing construction works with the development of new towns, Rope Guying is a more economical construction method than Wall Brace which fixes building structure like building wall and slab. The safety of this Rope Guying is not verified and many construction works are still carried out based on the experience of site managers. There has been no case of construction work where frame and measurements are applied. The objective of this study is to examine the safety of Rope Guying method and ensure the effective implementation of equipment and prevention of disasters.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.1
• /
• pp.17-28
• /
• 2012

Functional mismatch and thought and plan-less material use of recently built boundary barriers in rural areas should greatly degrade their amenity value as one of linear villagescapes, but, their present state-of-art basically necessary for problem-solving had never surveyed up to now. From this point of view, this study tried to investigate present stock quantities and qualities of boundary barriers in rural areas by sample studies on 21 case villages(7 types ${\times}$ 3 cases) and comparative analysis between the planned or improved and nots. Wall type was absolutely dominated in the structural terms, of which more than half was used cement block as building material and, therefore, grey-colored. More than half of total barrier length were fully shielded, while relatively partially shielded in the mountainous villages in open space and 'Cultural villages' with closed housing structures. Free standing style of barriers was shown along over two thirds of their total length, although not more than half in planned reclaimed villages. Especially, because of one-sided wall type structure, mismatched over-shieldness and poorer maintenance condition of the boundary barriers in peri-urban villages, there should be provided with very intensive improvement efforts for amenity barriers.

• Journal of the Korean housing association
• /
• v.13 no.6
• /
• pp.31-39
• /
• 2002

The purpose of this study is to examine the exterior remodeling examples of urban houses which have been changed to be mixed-use buildings with commercial use, and to guide the future exterior remodeling. Some of the research results are as follows: 1) Exterior remodeling of commercialized urban detached houses is focused on two-dimensional changes of exterior surface, rather than on three-dimensional changes of mass or shape. 2) Unlike commercial buildings generally relying on signboards to express their commercial nature, the exterior-renovated houses with commercial uses mainly rely on the image of whole building shape based on exterior materials and colors. 3) Installations of free-standing walls and double skins are preferred as exterior remodeling techniques, due to the structural limitation of exterior walls.