• 한국해안해양공학회지
• /
• 제8권1호
• /
• pp.81-86
• /
• 1996

해저 파이프라인은 해저 석유 및 천연가스 생산의 전반에 걸쳐 중요한 역할을 하나, 열악한 해양환경하에 있어 여러 가지 외부 요인에 의해 손상될 가능성이 높으며 그로 인한 피해는 막대하다. 본 논문에서는 해저 파이프라인의 안정성을 위협하는 주된 요인 중의 하나인 동적 자유경간을 해석하였으며, 해저 파이프라인 설계에 있어서 중요한 자유경간의 허용길이를 산출하였다. 자유경간의 허용길이는 와동방출의 진동수와 자유경간의 고유진동수와의 상관관계를 이용하여 산출하였고 경계조건에 따른 허용길이의 변화를 규명하였다. 자유경간 양단의 해저지반은 탄성기초로 간주하였으며, 이를 선형 및 회선 스프링으로 치환하여 경계조건을 일반화하였다. 본 연구를 통하여 여러 가시 지반조건에 대한 동석 자유경간의 정확한 허용길이를 간단하게 얻을 수 있는 무차원화 된 곡선을 구하였으며, 그 결과를 우리나라 동남해역 천연가스전에 설치예정인 해저 파이프라인에 적용하였다.

• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.668-678
• /
• 2017

Intermolecular interactions were studied for binary mixtures of 2-propanol + cyclohexane, n-hexane, benzene, toluene, o-, m- and p-xylenes by measuring ultrasonic speeds (u) over the entire range of composition at 298.15 K and 308.15 K. From these results the deviation in ultrasonic speed was calculated. These results were fitted to the Redlich-Kister equation to derive the binary coefficients along with standard deviations between the experimental and calculated data. Acoustic parameters such as excess isentropic compressibility ($K_s^E$), intermolecular free length ($L_f$) and available volume ($V_a$) were also derived from ultrasonic speed data and Jacobson's free length theory. The ultrasonic speed data were correlated by Nomoto's relation, Van Dael's mixing relation, impedance dependence relation, and Schaaff's collision factor theory. Van Dael's relation gives the best prediction of u in the binary mixtures containing aliphatic hydrocarbons. The ultrasonic speed data and isentropic compressibility were further analyzed in terms of Jacobson's free length theory.

• Ocean Systems Engineering
• /
• 제1권1호
• /
• pp.59-72
• /
• 2011

The objective of this work is to investigate the possibility of using the longitudinal strain on the surface of a pipe to determine the inception of dangerous free spanning. The long term objective is to develop an online monitoring technique to detect the development of dangerous free spanning in subsea pipelines. This work involves experimental study as well as finite element modeling. In the experiments, the strains at four points on a cross section of a pipeline inside the free span zone are measured. Pipes with different boundary conditions and different diameter to length ratios were tested. The pipe is treated as a simple beam with fixed-fixed or simply supported boundary conditions. The variation of the strains as a function of the diameter to length ratio gives a pointer to the inception of dangerous free spanning. The finite element results agree qualitatively with the experiments. The quantitative discrepancy is a result of the difficulty to replicate the exact boundary conditions that is used by the finite element program.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2328-2341
• /
• 1995

An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purposes of the present study are to investigate the effect of the free stream turbulence intensity on the reattachment length and to understand the turbulence structure of the recirculating flows. Local mean and fluctuating velocity components were measured in the separated and reattaching axisymmetric turbulent boundary layer over the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. As the free stream turbulence intensity increased, the reattachment length became shorter due to the enhanced mixing in the separated shear layer. It was also observed that the reverse flow velocity and turbulent kinetic energy increase with increasing free stream turbulence intensity. Spectral data and flow visualization showed that low-frequency motions occur in the separated flow behind a backward-facing step. These motions have a significant effect on the time-averaged turbulence data.

• Archives of Reconstructive Microsurgery
• /
• 제5권1호
• /
• pp.46-55
• /
• 1996

The purpose of this study is to investigate if there is a higher rate of free flap failure in cases of vein grafts compared to non-vein graft, and to analyze the clinical usefulness and necessity in elective free flap surgery. We have used 24 vein grafts in 208 free flaps from May, 1986 until August, 1995. Vein grafts were from 2cm to 50cm in length between the recipient and donor vessels. Reconstructed sites were 10 lower extremities, 8 head and neck, 4 hand, and 2 trunk. Vein grafts were used 14 for arterial, 6 venous, 4 in both arterial and venous anastomoses. We intentionally used long vein grafts longer than 5cm for improved blood flow in cases of peripheral vascular disease, radionecrotic wounds, lower leg trauma. Short vein grafts of about 3cm in length were used to overcome the shortage of vascular length in cases of unexpected vessel anomaly, short donor vessel, and difficult access to recipient vessels after radical neck dissection. All veins were carefully handled with ligation of very small branches and were transferred to the recipient site without irrigation. 8 flaps were failed out of a total of 208 free flaps, however there was no failure among the 24 cases that needed vein grafts between the donor and recipient vessels. Success rates between non-vein grafts free flaps and vein graft free flaps were 95.6%(8/184) and 100%(0/24). Even though the vein grafts increase the operation time and the number of anastomoses, they do not result in any increased failure rate of free flap surgery(4.4% versus 0%). In addition to the reducing tension between recipient and donor vessels, the surgeon can select better recipient vessels with excellent blood flow so that vein grfats in microsurgery can provide a high success rate of free flaps.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.385-392
• /
• 2001

Time-dependent frequency and energy of free vibration of the Spagetti problem, that is the axially moving continuum with time-varying length, are investigated. Exact expressions for the natural frequency and time-varying vibration energy are derived by dealing with traveling waves. When the string length is increased, the vibration period increases, but the free vibration energy varies as a function of both translating velocity and boundary velocity of the continuum. However, when the string undergoes retraction, the vibration energy increases with time, String tension together with non-zero instantaneous velocity at the moving boundary results in energy variation.

• Journal of Communications and Networks
• /
• 제14권2호
• /
• pp.213-221
• /
• 2012

The architecture of an interconnection network is usually represented by a graph, and a graph G is bipancyclic if it contains a cycle for every even length from 4 to ${\mid}V(G){\mid}$. In this article, we analyze the conditional edge-fault-tolerant properties of an enhanced hypercube, which is an attractive variant of a hypercube that can be obtained by adding some complementary edges. For any n-dimensional enhanced hypercube with at most (2n-3) faulty edges in which each vertex is incident with at least two fault-free edges, we showed that there exists a fault-free cycle for every even length from 4 to $2^n$ when n($n{\geq}3$) and k have the same parity. We also show that a fault-free cycle for every odd length exists from n-k+2 to $2^n-1$ when n($n{\geq}2$) and k have the different parity.

• Wind and Structures
• /
• 제30권5호
• /
• pp.533-546
• /
• 2020

Large Eddy Simulation (LES) is used to study the effects of steady slot suction on the aerodynamic forces of and flow around a wall-mounted finite-length square cylinder. The aspect ratio H/d of the tested cylinder is 5, where H and d are the cylinder height and width, respectively. The Reynolds number based on free-stream oncoming flow velocity U_∞ and d is 2.78×10⁴. The suction slot locates near the leading edge of the free end, with a width of 0.025d and a length of 0.9d. The suction coefficient Q (= U_s/U_∞) is varied as Q = 0, 1 and 3, where U_s is the velocity at the entrance of the suction slot. It is found that the free-end steady slot suction can effectively suppress the aerodynamic forces of the model. The maximum reduction of aerodynamic forces occurs at Q = 1, with the time-mean drag, fluctuating drag, and fluctuating lift reduced by 3.75%, 19.08%, 40.91%, respectively. For Q = 3, all aerodynamic forces are still smaller than those for Q = 0 (uncontrolled case), but obviously higher than those for Q = 1. The involved control mechanism is successfully revealed, based on the comparison of the flow around cylinder free end and the near wake for the three tested Q values.

• Archives of Reconstructive Microsurgery
• /
• 제13권1호
• /
• pp.58-62
• /
• 2004

Purpose: To cover the exposed tendons and bones after trauma and cure the concomitant osteomyelitis in the lower extremities, gracilis muscle free flaps are frequently preferred. 32 cases of gracilis muscle free flap we had done were analysed according to the indications, specification of flap length and width, pedicle length, vessels used in the anastomosis and final healing after at least over 1 year follow up. Materials and methods: From August 1995 through November 2002, we have performed 32 cases of gracilis muscle free flap transplantation with the general microsurgical procedures in the lower extremities. Open fracture of the middle and distal tibia were 12, exposed heel 6, crushing injury in the foot 5 cases, open fracture of the ankle 4, chronic osteomyelitis of the tibia 3 and osteomyelitis of the tarsal bones 2. Tailored flap length were ranged from 16 cm to 4 cm, width were from 5cm to 4cm. Pedicle length averaged around 4 cm. Anastomosis of one artery and two veins in both of donor and recipient were performed in 17 cases and one artery and one vein in 15 cases. Results: All flaps were survived, except 2 cases. Final flap healing was satisfactory to both of the patients and microsurgeon. Conclusion: Gracilis muscle free flaps are frequently chosen to cover the exposed components and cure the osteomyelitis in the lower extremities.

• Structural Engineering and Mechanics
• /
• 제74권2호
• /
• pp.175-187
• /
• 2020

The theories having been developed thus far account for higher-order variation of transverse shear strain through the depth of the beam and satisfy the stress-free boundary conditions on the top and bottom surfaces of the beam. A shear correction factor, therefore, is not required. In this paper, the effect of surface on the axial buckling and free vibration of nanobeams is studied using various refined higher-order shear deformation beam theories. Furthermore, these theories have strong similarities with Euler-Bernoulli beam theory in aspects such as equations of motion, boundary conditions, and expressions of the resultant stress. The equations of motion and boundary conditions were derived from Hamilton's principle. The resultant system of ordinary differential equations was solved analytically. The effects of the nanobeam length-to-thickness ratio, thickness, and modes on the buckling and free vibration of the nanobeams were also investigated. Finally, it was found that the buckling and free vibration behavior of a nanobeam is size-dependent and that surface effects and surface energy produce significant effects by increasing the ratio of surface area to bulk at nano-scale. The results indicated that surface effects influence the buckling and free vibration performance of nanobeams and that increasing the length-to-thickness increases the buckling and free vibration in various higher-order shear deformation beam theories. This study can assist in measuring the mechanical properties of nanobeams accurately and designing nanobeam-based devices and systems.